Dissertation > Excellent graduate degree dissertation topics show

The Study of InGaAsN Laser Fabricated with PAO

Author: WangBing
Tutor: QuZuo
School: Changchun University of Science and Technology
Course: Optics
Keywords: pulse anodic oxidation InGaAsN strain quantum-well ridge wave-guide
CLC: TN248
Type: Master's thesis
Year: 2011
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


Instead of former ways of thermal evaporation plating and magnetron sputtering, this paper adopts pulse anodic oxidation (PAO) method.Compared with the traditional methods, ulse anodic oxidation (PAO) method is a simple way with a shorter process cycle and a better film quality. Meanwhile, this paper introduces this particular material called InGaAsN with respect to its merits, forming mechanism, wavelength range, temp-erature sensitive characteristics and so on.Among these aspects, the distribution ratio of In and N has been analyzed. Epitaxial wafer grows with the MEB system, combine with the F-P cavity and ridge waveguide structures, and the detailed introduction and ill-ustration for the followed strain quantum-well laser.We carried out a data test to the laser designed and produced,and the results show that: At room temperature 20℃, the threshold-current of InGaAaN strain quantum-well laser is 29mA and its density is 290A/cm2. The output power reached 15mW in cw mode from the laser with a wavelength of 1.3μm. The slope efficiency of laser reached to 0.125W/A and the characteristic temperature was 133K. We can draw a conclusion from the comp-arative analysis, preparing passivation layer with pulse anodic oxidation(PAO) method has a better compactness and firmness than ordinary magnetron sputtering method.

Related Dissertations

  1. Study on the Preparation and Photocatalysis of TiO2 Film on Aluminum,O643.36
  2. Characterization and Growth of 1.2μm Highly Strained InGaAs/GaAs Quantum Well,TN304.01
  3. Study of Compact PLC Devices in SOI and Arrayed Waveguide Gratings,TN252
  4. The Researches on Compact Power-Combining Technology Based on Waveguide,TN73
  5. Theoretical analysis and application of the substrate integrated ridge waveguide,TN814
  6. Using FDTD Method to Analyze a Single Ridged Waveguide Antenna for Near Field Measure and the Optimization Reaserch of MEMS Phase Shifter,TN820
  7. 8mm power combiner circuit,TN73
  8. The main mode and the high-order mode k_c CAD ridge waveguide,TN011
  9. Analysis for Transmission Characteristics of Ridged Waveguides with Complicated Structure by Using Fourier’s Expansion-Differential Method,TN62
  10. Helix traveling wave tube slow-wave structure and the input and output structure,TN124
  11. Ridge waveguide directional the the of the design with the research of of the coupler,TN622
  12. Inductively coupled plasma etching of InP pump lasers produce research and 14xxnm,TN248
  13. Arrayed Waveguide Grating Employing Integrated Waveguide Turning Mirror,TN25
  14. The thermal characteristics of semiconductor lasers and packaging technology,TN248.4
  15. The semiconductor lasers Characterization and pulse measurement techniques,TN248.4
  16. Study of Polymer Themo-optical Switch Based on Silicon,TN256
  17. Of 1.05μm high speed broadband laser research,TN248
  18. Analysis of L/C Dual-band Shared Aperture Broadband Antenna,TN822
  19. Ka-band planar power synthesis technology,TN73
  20. 6.5 ~ 18.0GHz High Power Double Ridge Waveguide water load Development,TN925
  21. Waveguide - Microstrip Transition Design and Simulation Technology,TN814

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser
© 2012 www.DissertationTopic.Net  Mobile