Dissertation > Excellent graduate degree dissertation topics show

The Optimization of Processing Parameters and Experimental Investigation on Metal Components Fabricated by Laser Cladding

Author: JiXia
Tutor: ZhouJianZhong
School: Jiangsu University
Course: Mechanical Manufacturing and Automation
Keywords: laser cladding process Ni-based alloy components microhardness and microstructure processing parameters optimization Statistical Analysis System
CLC: TN249
Type: Master's thesis
Year: 2008
Downloads: 192
Quote: 0
Read: Download Dissertation

Abstract


Laser cladding rapid prototyping is an advanced fabrication technology that combines the rapid prototyping technique and laser surface strengthening technology. It has a promising future since density metal components can be rapidly deposited by laser cladding metal materials additively. Compared with the traditional manufacturing technologies, components fabricated by laser cladding prototyping have better mechanical properties. In the paper, the optimization of processing parameters by SAS software is investigated, and the experimental investigation on the metal components fabricated by laser cladding is also discussed, the main contents are as follows:First, the process of laser cladding prototyping is analyzed. The mutual actions among the laser beam, metal powders and the substrates are studied in detail. The energy transfer and the mass transfer during the process of laser cladding are discussed and the convection model is established. In the paper, the influencing factors of cladding components are analyzed, which can provide academic supports to the optimization of processes parameters and experimental investigation.Second, the optimal processing parameters during the laser cladding process are studied by Plackett-Burman design and Response Surface Analysis (RSA) with SAS. The results show that the effects of laser power, scanning speed, the velocity of feeding powder on the quality of cladding components are significant by Plackett-Burman design and analysis. The typical correlative analysis by SAS between the cladding width and cladding height are analyzed. The results indicate that the better cladding layers are received by optimizing processing parameters.Third, the experimental study of the metal components fabricated by laser cladding is investigated based on the optimization of parameters. The influences of the main processing parameters on the surface quality under single path and single layer condition are analyzed. The laser power and the height of Z-axis in multilayer cladding are discussed as well as heat dissipation measure during the cladding process. Several problems that maybe happen are discussed, such as warpage deformation, the instability of powder flow, the cladding crack and the air hole and so on. Many corresponding improvement measures are put forward as well. The further studies of cladding components are carried out. The interior structure and components of laser cladding layers are observed. The hardness measurement along the deep direction of layers and the friction and abrasion experiment of laser cladding parts are carried out as well. The results indicate that: the components fabricated by laser cladding prototyping have better mechanical properties than those produced by the traditional manufacturing technology.

Related Dissertations

  1. Students’ Achievements Statistics Analysis System Development and Implementation,TP311.52
  2. Bank card Statistical Analysis System Design and Implementation,TP311.52
  3. Road Traffic Accidents Statistics Analysis System,U491.31
  4. Phosphorus furnace Modeling and optimization of process parameters,TQ126.3
  5. Research on Gathering and Statistically Analyzing System of Traffic Accident Information in Road Transportation,U491.31
  6. Higher performance analysis information system construction and implementation,TP311.52
  7. Applied Research about Thermal Resistant Layer of Laser Cladding Cr3C2 on the Chamber Surface of Hot Forging Die,TG174.4
  8. Research on Control of Melt Steel Level, Rolling Force Model and Process Optimization for Twin-Roll Steel Strip Casting,TG335
  9. Spray forming tissue formation simulation of billet shape,TF124.39
  10. Research and Design for the Laser’s Power Control System of Laser Direct Writing,TN249
  11. Several Key Issues on Closed-Loop Control for Precision Laser Tracking Device,TN249
  12. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  13. Study on High Power Nd:YAG Laser Scanning Galvanometer System,TN249
  14. A Study on UV Laser Micro-machining Single-crystal Silicon,TN249
  15. Research on Galvanometer Scanning Laser Welding System,TN249
  16. Precision machining technology based on femtosecond deep hole machining of metal film,TN249
  17. The Design and Implementation of Laser Array Aerial Effects,TN249
  18. Pulsed laser ablation mechanism of propulsion impulse occurs,TN249
  19. Study on the Target-In-the-Loop Adaptive Optics Systems,TN249
  20. Research on the Irradiation Effects of Insb Detectors under Sub-band CW Laser,TN249
  21. An Investigation in Surface Morphology, Component and Pulp Chamber Temperature of Dentin Irradiated with Erbium Laser,TN249

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser applications
© 2012 www.DissertationTopic.Net  Mobile