Dissertation > Excellent graduate degree dissertation topics show

The Research on Multivariable Internal Model Control Algorithm

Author: YaoYanJing
Tutor: PanLiDeng
School: Beijing University of Chemical Technology
Course: Control Theory and Control Engineering
Keywords: Internal model control time delay MIMO system decoupling control non-square system IMC-PID NLJ algorithm
CLC: TP273
Type: Master's thesis
Year: 2008
Downloads: 246
Quote: 1
Read: Download Dissertation

Abstract


Nowadays, advanced control technology has been applied widely in many areas of industry, and it is obvious that this technology brings great economical effects. Although single loop PID controllers are still being employed in about 80% to 90% of the control systems.However, the PID controllers could not be competent in controlling some complex systems. Expecially for the MIMO systems, the processes usually exhibit severe interaction effects and consequently are very difficult to control, thus the single loop PID could not deal with this problem effectively. So the strategies for MIMO processes have been studied much, in the hope that the effective closed loop control of coupling systems can be achieved, and the economy benefits can be enhanced, the energy consumption will be reduced, and the high quality of products could be guaranteed.IMC technique is chosen to control the MIMO systems here. During decades of research and application, IMC is found to be of many advantages, such as excellent servo performance, high robustness, particularly in case of model uncertainty, effective hog-tieing, and so on.Otherwise, variables interact and constraint each other in some complex industry systems. Sometimes operational variables cannot control systems in time because of being constrainted, as a result, the structure of control systems transform between square and non-square systems. From the outlook of a device or an unit, non-square system is also common, such as fat systems whose vector of operational variables is more than that of control variables. It is not rare that time delay problems exhibit in industry processes. Usually, for MIMO systems, time delay of every loop is different. The focus puts on how to track the inputs without coupling for multi-time delays systems.Internal model controller has been designed for non-square systems in this paper. For the fat systems, the number of operaitonal variables is more than that of control variables, so the generalized inverses of matrices is used to design the internal model controller by caculation in frenquency domain. The simulation results are presented showing good performance about dynamic decoupling, multi-time delays control, the response velocity, and the robust. For the thin systems, the number of operaitonal variables is less than that of control variables, so selection control system is used to carry out complex control performance. Precise control and borderline control are chosen according to different control variavles. Then safe production and production quality can be ensured by switching controllers. Good performance is showed by the simulation results.

Related Dissertations

  1. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  2. Robust Model Predictive Control of Networked Systems,TP273
  3. Robust Filter Design Based on Polynomially Parameter-dependent Lyapunov Functions,TP13
  4. Stability Analysis and Robust Controller Design for Stochastic Time-Delay Systems,TP13
  5. Stability Analysis of Systems with Time Delays,TP13
  6. Design of Gyro Stabilized Pod Control System,TP273
  7. Researches on System Control Theories and Their Applications of AUVs,TP13
  8. Qualitative Study of Almost Periodic Solutions of Some Competition System,O175
  9. Modeling and Control of Networked Control Systems with Packet Dropouts and Packet Disordering,TP273
  10. PID Controller Design of Linear Systems with Time Delay Based on Parametric Space and GUI Simulation,TP273
  11. Research of Robust Control for Uncertain Time-delay Singular Bilinear Systems,TP13
  12. Hot Galvanized Line Air Knife Control Research,TP273
  13. Research on the Application of the MIMO Space-time Coding Theory,TN911.22
  14. The Research of Signal Detecting Algorithms and Improved Sphere Detecting Algorithms in MIMO Systems,TN919.3
  15. ESPRIT Parameter Estimation Algorithm in Wideband Channel System,TN925
  16. Control Study of Teleoperated Robots with Time Delay,TP242
  17. Based on Intelligent Control doubly-fed wind generator power decoupling control,TM315
  18. Complex process control system design and control strategy,TP273
  19. Hot and cold water mixing system decoupling control research and implementation,TP273
  20. Moving Base Transfer Alignment Error Analysis and Compensation Method,V249.322
  21. Neural Network PI Pepetitive Controller for Active Power Filter,TN713.8

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile