Dissertation > Excellent graduate degree dissertation topics show

Shield machine hydraulic long pipe vibration modal analysis and experimental study

Author: TianKe
Tutor: DengGuiLing；XieJingHua
School: Central South University
Course: Mechanical and Electronic Engineering
Keywords: Tunnel boring machine long pipeline system FSI modal analysis
CLC: U455.3
Type: Master's thesis
Year: 2011
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


The characteristics of the hydraulic piping system in Tunnel Boring Machine (TBM) are large slenderness ratio, high fluid pressure and low flow velocity. Due to fluid structure interaction, the vibration of pipe was increased, and control signal was lagged feedback. Meanwhile, the effects of FSI were intensified by the valve closure, the changes of loads and even the impurities interfused in the oil. These also result in severe vibration of pipelines, and even there might be extreme conditions such as pipe’s cracking. Combined with characteristics of hydraulic piping system of shield machine, studies of several following aspects were done in this article:1. The hydraulic experimental platform was set by referencing the long hydraulic piping system in TBM. In structure design, the devices of two hydro cylinders in opposite vertex with a large thrust load were imitated to the characteristics of a large thrust load in the TBM piping system. In testing system, a multi-stream combination test devices were developed for vibration effect of TBM piping system, to ensure test scientifically and reliably.2. The axial and lateral vibration differential equation considering fluid-structure interaction for hydraulic long pipeline of shield machine was derived and summed, and the overall transfer matrix considering fluid-structure interaction of hydraulic long pipeline was deduced in detail; for a typical long straight hydraulic pipeline(length 8000mm, length to diameter ratio greater than 900),the numerical analysis of its modal parameters considering fluid-structure interaction was done; compared with modal parameters got from the test, the validity and limitation of the method used for the modal calculation of the actual hydraulic long pipeline were analyzed.3. The modal pilot study of hydraulic long pipeline was carried out. The first 14 frequencies and mode shapes of the long straight pipeline (length 8000mm) been filled with the stationary oil, under the three spans (single span, double-cross and four-cross), were measured and analyzed; The test and analysis for the vibrating mode of hydraulic long pipeline under many actual working conditions were done; From two aspects of the optimization parameters and optimization motivators, the damping measures of hydraulic long pipeline were proposed.

Related Dissertations

  1. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  2. Design of Motorcycle Frame and Its Mechanics Analysis,U483
  3. Study of Modal Characteristics of a Car Body-in-White,U463.82
  4. Analysis and Evaluation of Some Heavy Truck Drive Axle Housing’s Static and Dynamic Characteristics,U463.218.5
  5. Modal Analysis, Finite Element Modeling and Stress Calculation of Boom of 46D Truck-mounted Concrete Pump,TU646
  6. The Design and Research of a New Type of Clamping Elements for Roller Guide,TG659
  7. The Ultimate Load and Dynamic Analysis of Transmission Tower Frame,TM753
  8. Experimental Analysis of Boom Vibration and Stress Calculation of Pipe for 46D Truck-mounted Concrete Pump,TU646
  9. Study on Aseismic of Frame Structure with Weakness Story at Bottom Considering Filled-wall Influence,TU352.11
  10. Parallel six-dimensional shaking table Design and Research,TH762.2
  11. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  12. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  13. Direct-drive A / C -axis CNC universal milling head swivel double Finite Element Analysis,TG547
  14. Car engine mounting system research,U464
  15. Based on the finite element analysis to improve the design of medium-duty truck chassis and Test Research,U463.32
  16. Board structure acousticst sound power modal analysis,U661.44
  17. Submarine additional mass calculation and vibration characteristics of the water,U674.76
  18. Turbine flow numerical simulation of fluid-structure coupling vibration,O353.4
  19. Ice and the role of non-simultaneous destruction of the structure of the numerical simulation,U657
  20. The Numerical Methods Research of Coupled Vibration and Sound Radiation of Underwater Structures,U661
  21. Numerical Simulations of Interactions Between Waves and Pendulum Wave Power Converter,P743.2

CLC: > Transportation > Road transport > Tunnel project > Tunnel construction > Construction machinery
© 2012 www.DissertationTopic.Net  Mobile