Dissertation > Excellent graduate degree dissertation topics show

Improved Structure Design for Resource Cabin of Rendezvous and Docking Target Spacecraft

Author: ChaXueLei
Tutor: TangGuoJin；LiHaiYang
School: National University of Defense Science and Technology
Course: Aerospace engineering
Keywords: resource cabin main carrier module of propulsion subsystem improved design FEM vibration test
CLC: V423
Type: Master's thesis
Year: 2011
Downloads: 21
Quote: 0
Read: Download Dissertation

Abstract


Target spacecraft in the second phase of national manned astronautical engineering, consists of resource cabin and experimental cabin. The resource cabin is notight, whose structure is relatively complex. For all the design assignment of the cabin shell and the main carrier module of propulsion subsystem, ensuring its structure security and reliability is the most important one. This paper deals with the problem that vertical response of the partial structure of cabin shell and main carrier module is excessive, the structure design of the resource cabin is improved via finite element method(FEM), the new structure of resource cabin is validated with environmental vibration test. The design requirement is achieved finally. The main work and achievements are summarized as follows:The original structural design of the resource cabin is described in detail, and it is validated with the first environmental vibration test, it is found that the response of the partial structure of cabin shell and main carrier module is excessive, so it can’t meet the environmental vibration test design requirement.A finite element model for the main structure of resource cabin, including cabin shell and main carrier module of propulsion subsystem, is established by MSC.Patran/Nastran software. To solve the problem of the excessive vertical response in the prior vibration test, according to the engineering characteristic and the restriction, the improving schemes of cabin shell and main carrier module of propulsion subsystem are proposed, which are analyzed by FEM with Frequency Response Analysis Method respectively, The final scheme is confirmed in light of the analysis results of FEM.According to the improved structural design scheme of resource cabin achieved by FEM, the resource cabin shell and main carrier module are reconstructed, and the validated environmental vibration tests are carried out again. It is shown that the first natural frequency is well agreement with the FEM simulation results. The first natural frequency of the main carrier module increases, while its dynamic responses decrease. It provides the basis for appraisal test of the whole spacecraft.In conclusion,an improved design scheme on the main structure of resource cabin is derived with FEM, which is validated by vibration tests. The suitable design scheme is finally obtained. The work in this thesis can speed up the development schedule of the rendezvous and docking target spacecraft. The method and conclusions would be available for the design of other spacecraft.

Related Dissertations

  1. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  4. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  5. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  6. Design and Experiment Study on Multi-Functional Machine of Joint Harvesting Combined with Ditch Buried Grass for Rice and Wheat,S224.29
  7. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  8. Undersea robot plow trenching machine design and analysis,TE952
  9. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  10. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  11. Experimental Research on Automobile Engine Inertia Parameters Identification,U467.2
  12. Analysis and application of large structure vibration test based on wireless sensor networks,TP274
  13. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  14. Study on Stamping-forging Process and Experiment of Sheet Metal Parts with Non-uniform Thickness,TG386
  15. Random Vibration Response Control and the Patran Redevelopment,O324
  16. Research on Vibro-acoustic Behavior of a Cabin Model with Floating-raft System,U661.44
  17. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  18. Grooves on the surface of the impact of packaging interfacial thermal resistance,TN605
  19. Large aperture telescope primary mirror side support structure optimization,TH751
  20. Hot stamping door impact beams Experimental studies and material properties gradient optimization,U467.3
  21. Tipper Lifting Mechanism and the sub-frame structural analysis and optimization,U469.4

CLC: > Aviation, aerospace > Aerospace ( Astronauts ) > Rocket, the spacecraft structure (overall ) > Spacecraft design and construction of
© 2012 www.DissertationTopic.Net  Mobile