Dissertation > Excellent graduate degree dissertation topics show

Study on Bending Deformation of Composite Thick Plates

Author: LuoJiaZhi
Tutor: LiuTuGuang
School: Huazhong University of Science and Technology
Course: Design and manufacture of ships and marine structures
Keywords: three-dimensional linear three-dimensional nonlinear axisymmetrically circular plate elliptic plate rectangular plate orthotropic transverse stress
CLC: U668
Type: PhD thesis
Year: 2011
Downloads: 54
Quote: 0
Read: Download Dissertation

Abstract


This paper presents a new mathematic model and a set of close three-dimensional linear solutions, taking account all of the normal stresses and shear stresses, for axisymmetrically homogeneous isotropic circular plates, orthotropic elliptical plates and rectangular plates with all kinds of boundary conditions under uniform transverse load by using variable-separating method and analyzing weight of every-item in these solutions. Reasonability of the model and these three-dimensional linear solutions is demonstrated by comparing with FEM, the classical plate theory, some literature and some experimental results. The major work in the paper is as follows:Research on distribution of strains, stresses and displacements in axisymmetrically homogeneous isotropic circular plates, laminates and sandwich plates with clamped, simply supported edges conditions under uniform transverse load was performed by using displacement method. Three boundary conditions for displacement and three boundary conditions for stress were satisfered on these solutions。A new mathematical model, with less variable-item, taking account of the transverse strains and stresses, was gotten by the influence study of every-item of the three-dimensional solutions for axially symmetrical homogeneous isotropic circular plates.Based on the two-dimensional solutions, taking the solution functions as a set of finite series, three-dimensional solutions were presented for anisotropic elliptic plates, multilayered plates and sandwich plates with rigidly clamped boundary conditions under uniform transverse load, by getting the relationship of all items of the series from the three-dimensional equations of equilibrium.By investigating anisotropic elliptic plates with mid-plane clamped boundary conditions for influence of every-item of the three-dimensional solutions on the accuracy, a new simplified model was obtained, which with less variable-item took into account the transverse strains and stresses. And farther, the model was successfully applied to the anisotropic elliptic plates with simply supported edges boundary conditions.Using the three-dimensional analysis of the anisotropic elliptic plates with mid-plane clamped boundary conditions, with simply supported edges boundary conditions, and their simplified models for reference, some new models with less variable-item took into account the transverse strains and stresses were obtained for orthotropic rectangular plates with different boundary conditions, such as:four clamped edges, four simply supported edges, two opposite clamped and two opposite simplify supported edges, two opposite clamped and two opposite free edges, two opposite free and two opposite simplify supported edges under uniform transverse load.Taking the three-dimensional solutions as the foundation, a set of three-dimensional nonlinear solutions for axisymmetrically homogeneous isotropic circular plates was obtained by using the variable-separating method and turning the nonlinear three-dimensional equations into linear ones.Some experiments were conducted for axisymmetrically homogeneous isotropic circular plates and sandwich circular plates. The results were compared with FEM analysis, class plates and shell theory, three-dimensional exact theory and the paper’s theory analysis.

Related Dissertations

  1. High-speed rail Orthotropic Steel Bridge Deck Experimental Study,U443.31
  2. Railway continuous beam arch combination structural design of key technologies,U448.13
  3. Railway bridge orthotropic plate U ribs with the beam web connection at the fatigue properties of,U441.4
  4. Investigation on the Buckling of Rectangular Plates Subjected to Nonlinearly Distributed In-plane Loads Along Their Edges,O343.9
  5. The Study for Nonlinear Harmonic Resonance of Axailly Moving Rectangular Plate,O322
  6. A Parallel DDM Preconditioner for Solving Finite Element Discretization of Elasticity Problem in Three Dimension,O241.82
  7. Structural Optimization Selection of Tianjin Orthotropic Steel Bridge Deck Pavement,U443.33
  8. The Technological Study of Establishing the Orthotopic Unilateral Lung Transplantation Model in Rats,R-332
  9. The Research on Distortion Mechanism of Three-roll Rotary Rolling Mill for Pipe Flans,TG339
  10. Research on Local Structure of Separate Orthotropic Deck Flat Steel Box Girder,U448.213
  11. Nonlinear Mechanical Properties Analysis of Bioprosthetic Heart Valves,R654.2
  12. Analysis and Application on Two-way Effects for Concrete Invertible T Composite Slab Floor of Underground Structure,TU93
  13. The form Deformation and Aerodynamic Performance of Three-dimensional Flexible Sails,U674.926
  14. Optimization and Scheme Design in Engineering Application of Photonic Optical Fiber Sensing Structure,TN253
  15. Bending and Vibration of Rectangular Orthotropic Thin Plates on Elastic Half-Space,TU470.3
  16. Reducing and Simulating of the Stiffened Plate on Jack-up Platform in Structure Analysis,U661.4
  17. Research on the Stability of Compression Stiffened Plates of Orthotropic Steel Box Girder,U441
  18. Experiment Study on Mechanical Property of Polyurethane-steel Sandwich Plate System Bridge Deck,U441
  19. Bimaterial bending fracture problem in the complex variable method,O346.1
  20. The orthotropic bimaterial bending fracture problem research,O346.1
  21. Research on Trailing Impact Rolling for Controlling Welding Cold Crack of 30CrMnSi,TG404

CLC: > Transportation > Waterway transport > Marine Engineering > Shipbuilding materials
© 2012 www.DissertationTopic.Net  Mobile