Dissertation > Excellent graduate degree dissertation topics show

Research on Laser Length Measurement System of Oil Line Pipe

Author: SunMengJuan
Tutor: KangWeiMin
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: oil line pipe pulse laser ranging STC12C5A60S2 MCU LabVIEW
CLC: TH761.2
Type: Master's thesis
Year: 2011
Downloads: 72
Quote: 0
Read: Download Dissertation

Abstract


As the most important energy sources in the world, oil is the lifeline of the national economy, which connecting closely in our life. By measuring the length of the oil line pipe, we can easily grasp the progress of the oil collection and adjust the production technology in time. So the accurate measurement of the length of the oil line pipe becomes particularly important.At present, the most oilfield companies using traditional artificial pulling feet to measure the length of the oil line pipe. It not only has intensity labor, low efficiency, but also has low accuracy. For this situation, this paper presents a laser range finder on length of oil line pipe. It has a high accuracy, additionally it also has many well functions, such as real-time measure, display, calculate, store, reappear. Moreover, it can be easily carrying, and against pollution powerfully, so it can adapt the harsh environment of the oilfield easily.The paper describes the principle of the instrument, the design ideas and technical details and so on. And it also introduces the development of the hardware and software system of the instrument. For hardware system, it choose STC12C5A60S2 MCU (Micro Control Unit) as the control chip, domestic DAYOU laser rang finder as ranging module which has a measurement range from 0.1m to 80m and accuracy reach to 2mm,and use CH452 to achieve the key scan function, KM-12864 LCD (Liquid crystal display) to display the measurement date, E2PROM belongs to MCU to store the data which can save resources, and reduce the cost. In addition, it chooses serial communication to send the data to PC. The software system consists of two parts: Lower computer and PC. For lower computer software system, it uses C programming language to program on KeilμVision4 environment. For PC software system, it chooses LabVIEW as graphical programming tools to achieve the representation of the measurement data and uses form pattern to store data. Finally, analyze the measuring data of the instrument and find it meet the accuracy of requirements absolutely, then test the repeatability and stability of it which has a good performance.The research on the laser range finder on length of oil line pipe has changed the domestic backward status of the oil line pipe measuring and it means so much to the entire oil industry.

Related Dissertations

  1. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  2. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  3. LabVIEW-based virtual oscilloscope design and remote control,TM935.3
  4. Exploration and Analysis of Electronic Detection of Raw Silk’s Flatness,TS147
  5. Research on Solenoid Valve Test System for Water Medium,TH134
  6. Research and Application of Remote Virtual Instrument Experimental Teaching System Based on LabVIEW,TP391.6
  7. Research on Thin-Film Hysteresis Loop Measurement System Based on Extraordinary Hall Effect,O484.43
  8. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  9. Development and Experimental Study about Virtual Instruments of Vibration Test and Analysis System and Combustion Analyzer,TK407
  10. Based on Virtual Instrument Simulation Load Test System Design,TP274
  11. Resonant vibration load fatigue testing system model predictive control technology,TH87
  12. Auto pedal control mechanism assembly test rig design and its key technologies,U467.5
  13. Based on LabVIEW typical communication signal modulation , parameter identification and simulation experiment,TP274
  14. Operating Conditions Assessment for a Grid-Connected Wind Turbine Generator System,TM315
  15. Research of Rutting Test Data Acquisition System Based on Vritual Instrument,U414
  16. A Study on the Portable Dynamic Signal Acquistion and Analysis System of Reciprocating Compressor,TH45
  17. Development of Measurement System for Charge Carrier Mobility Based on Virtual Instrument,TN304
  18. Study and Development of Power Quality Monitoring System Based on Virtual Instrument Technology,TM711
  19. Study Ofanti-lock Braking System Based on LabVIEW,U463.526
  20. Study of Test System of Composite Characteristic of Hydraulic Elements Based on Virtual Instrument,TH137.51
  21. Test System for Red High-definition Optical Pick-up Based on Lab VIEW,TP274

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Earth Science Instruments > Survey Instrument > Rangefinder
© 2012 www.DissertationTopic.Net  Mobile