Dissertation > Excellent graduate degree dissertation topics show

Research of Nanometer White-light Phase-shifting Interferometry and Instrumentation Used for Micro-surface Topography Measurement

Author: ZhangHongXia
Tutor: ZhangYiZuoï¼›ZhouGe
School: Tianjin University
Course: Optical Engineering
Keywords: Micro-surface togography White-light phase-shifting interferometer Mirau interferometer Central obscuration Numerical aperture Piezoelectric Transducer (PZT)
CLC: TH744.3
Type: PhD thesis
Year: 2004
Downloads: 696
Quote: 8
Read: Download Dissertation

Abstract


The exit various methods used to measure the micro-surface topography andphase measurement methods in optical interferometry are described. The researchfocus and tend are introduced. A vertical-shaft-type Mirau white-light phase-shiftinginterferometer is developed based on white-light phase-shifting interferencemicroscopy. The interferometer is composed of the interference imaging andillumination part, Piezoelectric transducer (PZT) in the vertical direction,two-dimensional scanning part in the test surface, image capture and interferogramsanalyse part.The model for white-light interference microscope is developed and the spectrumwidth condition for white-light interference and monochrome interference is derived.The two-wavelength measurement and synthetic source measurement are analyzed.The Mirau interference objective is optimized developed based on infinity tubemicroscope structure. The interference intensity is balanced and the influence ofcentral obscuration by reference surface on the system performance is investigated.The reflected self-collimated structure is adopted in the illumination system. The twodimensional scanning are realized by the movement of precision motorized stage. Themicrocontroller serial circuit to control the step-motor is completed. The LED(light-emitting diode) constant current drive circuit and the mechanical structure areaccomplished. The sensitivities of different phase-shifting algorithms to thephase-shifting error and detector nonlinearity error are investigated. The numericalaperture effect is analyzed and calibrated. The lateral, vertical resolution andmeasurement range are determined. The surface topography of fiber optic connector ismeasured and the repeatability is less than 2nm.Major innovations of this dissertation:1. The model for white-light interference microscope is developed. Both thenumerical aperture and the spectrum distribution of light source have an effect onthe envelope of interferograms. The spectrum width condition for white-lightinterference and monochrome interference is derived.2. The geometrical optics of Mirau white-light phase-shifting interferometer isresearched. The intensity of the interference pattern is balanced using beamsplitters with different transmission/reflection ratio. The relations of Strehlcriterion, resolution limitation, modulation transfer function (MTF), remainderaberration and effective numerical aperture to central obscuration are analyzed.The numerical aperture correction factor in the Mirau interferometer is obtained.3. The three-dimensional scanning, multi-aperture stitching, two-wavelengthmeasurement and synthetic sources measurement are realized in the Mirauwhite-light phase-shifting interferometer. Three-dimensional scanning iscomposed of two-dimensional motorized stage and vertical dimensionalPiezoelectric transducer. Multi-aperture stitching extends the measurement range.4. The instrumentation of white-light phase-shifting interference microscopy iscompleted. The whole design, component arrangement, optical system,mechanical structure, circuit and soft design in the Mirau interferometer areaccomplished. The surface topography of fiber optic connector is measured.

Related Dissertations

  1. Random electromagnetic beam focusing and transmission of large numerical aperture,O436.1
  2. Experimental and Theoretical Investigation on Numerical Aperture and Mode Field Diameter of Pcf,TN253
  3. Partially coherent beam focusing characteristics of,O436
  4. Image Degradation and Restoration of Central Obscuration Optical Remote Sensing System,TP751
  5. Analysis Methods for Energy Transmission and Polarization State of Traced Rays in Optical Systems,O436.3
  6. The Study of Optical Micro-structure Inspection System,TN29
  7. The Application of Solid Immersion Lens in the Electro-optic Measuring Technique,TN247
  8. Study on the Sub-Aperture Stitching Optical System,O439
  9. Research on Modulation Transfer Function Calculation and Remote Sensing Image Restoration Based on Slanted-Edge Method,TP751
  10. Image Quality Optimization and System Implement for Digital Holographic Microscopy,O438.1
  11. The Testing System of the Leak Oilcan,TP274.5
  12. Fabrication and Properties Researches on Ball Lenses of Coupling Devices in Optical Communications,TN256
  13. Research on Craft of Large Numerical Aperture Multiple-Composition Glass Flexible Fiber,TQ171.776
  14. Investigations of Design Methods of Diffractive Optical Elements to Implement Optical Superresolution,TH74
  15. Study on Coherent Anti-Stokes Raman Scattering (CARS) Microscopy,O437
  16. Research on the Optimization of Laser Triangulation Device,TH744.5
  17. An Improved Design of Spectrophotometer with Double Beam,TH744.12
  18. Portable spectrophotometer Circuit Design,TH744
  19. Hyperspectral imager radiometric calibration laboratories,TH744.1
  20. Radial Shearing Interferometry Test Technology,TH744.3
  21. Ring light in the Fizeau interferometer system design and research,TH744.3

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Optical instruments > Physical optical instruments > Interferometer
© 2012 www.DissertationTopic.Net  Mobile