Dissertation > Excellent graduate degree dissertation topics show

Synthesis of Polyacrylate Antimicrobial Emulsion-Ag~+ and the Study of Antibacterial Finishing to Cotton Knitted Fabric

Author: FengQinHua
Tutor: JiangYaoXing
School: Suzhou University
Course: Textile Material and Textiles Design
Keywords: cotton knitted fabric plyacrylate antimicrobial emulsion-Ag+ the rate of antibacterial structure & properties
CLC: TS195.6
Type: Master's thesis
Year: 2011
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Contton, a most important natural textile, is widely used in clothing fields for its excellent properties such as softness, warm and comfortable. However, cotton fabric is susceptible to haimful bacteria, and may adversely affect human health. Ag+ plays an important role on functional modification of antimicrobial textiles, and Ag-type antibacterial agent has become a hotspot in the between of experts at home and abroad.First of all, polyacylate emulsion was modified by making its branch contained double amino in the laboratory, so it can complexation Ag+. Polyacrylate antimicrobial emulsion-Ag+ is made by mixturing 0.5% (o.w.f) polyacylate emulsion and 500mg/L AgNO3. The parameters was showed as follows:their volume was 25︰1, pH was 5, temperature was 20℃, time was180min.In this paper, the antibacterial finishing of contton knitted fabrics was carried out by using the plyacrylate antimicrobial emulsion-Ag+ compound antinbacterial agent following the finishing process of pad-drying. Influences of warious process parameters on antibacterial effect, washability and bursting strength were analyzed by experiments.On the basis of ensuring good antibacterial effect and maintaining the basic performances of fabric, the best finishing process parameters were: the bath rate was 1︰50, pH was 5, curing emperature was 160℃, curing time was180s.The rate of antibacterial fabric against S.aureus and E.coli was more than 99%, the rate of antibacterial of antibacterial Fabric maintained above 80% after washed 30 times, bursting strength keeped at 81%, it is enough for actual application.After fisishing with plyacrylate antimicrobial emulsion-Ag+, the performances of drape, flexibility and moisture absorbability of the cotton knitted fabric has been improved, but air permeability has been reduced.SEM map shows that the surface of anti-bacterial cotton fiber have plyacrylate antimicrobial emulsion-Ag+ which was form membrane; AIR-FTIR map shows that new absorption peaks come from plyacrylate antimicrobial emulsion-Ag+; XRD map shows that the crystallinity of cotton fiber hasn’t significant change after antimicrobial finishing; TG map shows that the thermal property of cotton fiber hasn’t significant change after antimicrobial finishing.

Related Dissertations

  1. Study on the Low-temperature and Environmental Pre-treatment Technology of Cotton Knitted Fabric,TS192
  2. Synthesis of Metel Complexes of Mimic Enzyme Containing Macrocyclic Triamine Lignd and Its Application in Low Temperature Bleaching of Cotton Fabric as Catalyst for H2O2,TS192.23
  3. Study on Bioscouring of Cotton Knitted Fabrics with Complex Enzymes,TS192
  4. Effects of Different Compatibilizers on Structure and Properties of PA6/ABS Blends,TB332
  5. Study on the Moisture Comfortable Performance about Thin Wool Knitted Fabrics,TS101.923.6
  6. Studying of Short Process for Pretreatment and Dyeing on Cotton Knitted Fabrics,TS194.6
  7. Studies on the Preparation、Structure and Properties of Nitride Thin Films,O484.1
  8. Study the mechanism of phase change material ZnO,TN304.21
  9. A Study on Structure and Properties of Poly (Phthalazinon Ether Sulfone Ketonl)/ Nylon 6 in Situ Composite via the Anionic Ring-Opening Polymerization,TB332
  10. Synthesis, Structure and Properties of Silica/mc Nylon6 In-Situ Nanocomposites,TB332
  11. Research on the Retreatment and Finishing Processes and Properties of the Flax/Colored Cotton Knitted Fabrics,TS18
  12. Study on Dimensional Stability of Colored Cotton Knitted Fabric,TS18
  13. Silk / linen , silk / cotton knitted products processing technology and wearability of,TS186
  14. Meltblown nonwoven fabric of polylactic acid spun its study of the structure and properties,TS174
  15. Structure and Properties of Poly(Vinyl Chloride)/Halloysite Nanotubes Nanocomposites,TB383.1
  16. Research on Preparation and Properties of Three-dimensional Carbon Fiber Reinforced Silicon Carbide Matrix Composites,TB33
  17. Effect of Host Material Minuteness and Additives on Microstructure and Properties of Al2O3-ZrO2-C Slide Plate,TF341.6
  18. Study on Synthesis and Modification of Poly Aromatic Ether Ketone and Poly Aromatic Ether Sulfone,TQ326.5
  19. Ferrocenyl saturated carboxylic acids synthesis , structure and properties of complexes,O627.81
  20. Interface between structure and properties of the PCD layer WC-Co matrix,TG713.1

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > Dyeing and finishing industry > Finishing > The finishing of a variety of fiber and its products
© 2012 www.DissertationTopic.Net  Mobile