Dissertation > Excellent graduate degree dissertation topics show

Dynamic Analysis on a High-speed Railroad Laneway-stacker of Three-dimensional Warehouse

Author: ZhongXiBo
Tutor: SongWeiGang
School: Northeastern University
Course: Mechanical and Electronic Engineering
Keywords: stacker deflection modal analysis
CLC: TH246
Type: Master's thesis
Year: 2009
Downloads: 68
Quote: 0
Read: Download Dissertation

Abstract


Stacker is important logistics equipment in Three-dimensional warehouse; its operation speed determines the efficiency of access to goods.In this paper, the relevant analysis parameters come from the data of a Single-column-type tunnel rail Stacker and a Two-column style rail tunnel Stacker. By UG, I set up the model of stacker rack, and then, analyzed the three common stacker movement situations with ANSYS:static, acceleration and deceleration; obtained maximum deflection of the static load and maximum deflection of the dynamic load, and the maximum swing of dynamic load. Through the finite element method, I analyzed the modal of stacker rack, got the natural frequencies and modal shape. They were compared between the results from the mechanical method, empirical formula method and finite element analysis method. The results verify the correctness of stacking model and the reliability of the finite element method.Based on the results of the elasticity analysis and the modal analysis, I have changed the shape of stacker’s column for improve its flexural modulus, and changed the structure of stacker rack chassis to a stable structure of the shape of a triangle in order to increase the stability of stacker. Finally, We get the results by the elasticity analysis and modal analysis of that triangle rack stacker with cross-section column has a small set of static and dynamic load deflection and lower deflection dynamic load swing. It also has a higher natural frequencies and better ability of anti-vibration. Thus, triangle rack stacker with cross-section column has a higher ceiling of acceleration and velocity.

Related Dissertations

  1. Study of Modal Characteristics of a Car Body-in-White,U463.82
  2. Modal Analysis of BIW Construction & Optimization Design in Modal Parameters,U463.82
  3. Modal Analysis, Finite Element Modeling and Stress Calculation of Boom of 46D Truck-mounted Concrete Pump,TU646
  4. The Ultimate Load and Dynamic Analysis of Transmission Tower Frame,TM753
  5. Reliaility Analysis to the Structure of Existing RC Bridge Before and after Reinforcement,U445.72
  6. Seismic Performance of Twenty Storeys Concrete Filled Square Steel Tubular Frame-Steel Shear Wall System,TU352.11
  7. Mechanical and Integrlty Analysis of the Flywheel in Reactor Coolant Pump,TL353.12
  8. Theoretical Analysis and Related Tests on Concrete Beam Prestressed with FRP Bars,TU375.1
  9. Experimental Analysis of Boom Vibration and Stress Calculation of Pipe for 46D Truck-mounted Concrete Pump,TU646
  10. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  11. Stacker Training Equipment Operation and Monitoring System,TH246
  12. Moving Base Transfer Alignment Error Analysis and Compensation Method,V249.322
  13. Baseband chip finger -joint design and research of CNC punch press,TG385.1
  14. Cracks in asphalt pavement structure with finite element analysis,U416.217
  15. Road Surface Rebound Deflection Testing Technology Research Based on the Collimation Laser Beams,U416.06
  16. Laser scanning system deflection of dynamic focusing module,TN249
  17. Liquid Level Oscillation in Connected Pipe Deflection Measurement System,U446
  18. Study on Vibration Comfort of Heavy-duty Commercial Vehicle Cab,U461.4
  19. Large Span Prestressed Concrete Continuous Rigid Frame Bridge Analysis and Construction Control of Long-term Practice of Deflection,U448.23
  20. Study on Concrete Creep Theory Applied in Construction of Continuous Rigid Frame Bridge,U445.57
  21. Study on Models and Industrial Application of Strip Crown and Shape Setting Control on Medium Breadth Hot Strip Mill,TG335.5

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Loading and unloading machinery > Stacking equipment
© 2012 www.DissertationTopic.Net  Mobile