Dissertation > Excellent graduate degree dissertation topics show

Study on Preparation and Electrochemical Performance of LiMnO2 and LiMn1/3Ni1/3Co1/3O2 Cathode Materials as Lithium Ion Batteries

Author: LiYiBing
Tutor: ChenBaiZhen
School: Central South University
Course: Physical Chemistry of Metallurgy
Keywords: Lithium ion battery positive material layered LiMnO2 Crystal stacking fault doping modification
CLC: TM911.1
Type: PhD thesis
Year: 2006
Downloads: 1032
Quote: 2
Read: Download Dissertation


With the popularization of electric utensils and electric vehicles, the industry of lithium ion batteries focus on lithium secondary batteries which show cheap, high property, and safety. The positive materials of layered manganese system is qualified. They were studied that synthesis technique, modification of materials, structure characterization, electrochemical properties, and electrode kinetics behaviors of layered LiMnO2 and layered LiNi1/3Co1/3Mn1/3O2 materials in this work.Preparation of monoclinic LiMnO2 by ion exchange method, and of lithium-rich spinel Li4Mn5O12 by a low temperature (LT) solid-state reaction method were studied. The results of X-ray diffraction(XRD) showed the sample prepared by LT solid-state method was a phase of lithium-rich spinel Li4Mn5O12. The results of electrochemical exams exhibited the capacity of both materials significantly fading with increasing cycling tests due to their unstable phase structures. The one-step solid-state reaction method of medium-high temperature (M/HT) was confirmed to prepare layered LiMnO2 using LiOH·H2O and Mn2O3 as raw materials in nitrogen flow. The reaction mechanism of preparation of orthorhombic LiMnO2 was investigated by means of TG-DTA thermal analysis technique. The effects of physical property of layered LiMnO2 on reaction condition such as calcination temperature, time, ball mill time, and ratio of lithium to manganese, was studied by XRD, SEM, BET. The full width of half maximum (FWHM) of crystal index(110) peak in o-LiMnO2 phase was investigated. The results revealed the degree of crystal stacking fault or defects decreasing with the elevated reaction temperatures, and the samples prepared at 600℃have the maximum degree of crystal stacking fault or defects. The samples with distribution of uniform particle size, large BET surface area and apparent figure of quasi-sphere were prapared using pre-treating raw materials by a ball mill with acetone as dispersant.The effect of reaction factors on electrochemical property of o-LiMnO2 materials was investigated. The relation of electrochemical properties to physical property of o-LiMnO2 was solved by employing principle of crystal stacking fault or defect. The electrochemical property of o-LiMnO2 is improved with increasing degree of crystal stacking fault or defect because the material activity was activated by some stacking fault or defect inside of crystal structure. The XRD investigation showed that the layered structure of active material transformed irreversibly into spinel structure after cycled many times by charge/discharge test. The result revealed that the o-LiMnO2 maintains good cyclic stability at 55℃and over-charged resistance in increasing voltage. The electrochemical test delivered the initial charge/discharge specific capacity of 279 mAh·g-1, 171mAh·g-1 ,respectively, and ratio of capacity retention of 95% on the 20th cycle for o-LiMnO2 prepared in the optimized condition of Li:Mn ratio of 1.05, ball milling 8h using acetone as dispersant, and calcining for 30h at 600℃. The Li+ ion transmission mechanism in interface region of o-LiMnO2 electrode was investigated by electrochemical impedance spectroscopy (EIS) technique.The effects of phase structure and property to Sb/Al doped LiMnO2 were studied. The cyclic stability of o-LiMnO2 was improved by low concentration Sb doped Doping A1 value 0.1 materials showed the best electrochemical property of discharge specific capacity of 197 mAh-g(-1) and maintained above discharge capacity of 190 mAh·g-1 after 20 cycles in2.5~4.6V. Cyclic voltammetry(CV) and electrochemical impedance spector exam demonstrated the conductive of electron and electrochemical performance was improve due to Al-doped materials. The chemical diffusion coefficients (DLi+) of A1 doped value 0.1 material is10-10 cm2·s-1 , increases much as 10 time as that of layered LiMnO2 by chronopotential test.LiNi1/3Co1/3Mn1/3O2 cathode material was prepared by high temperature calcining the mixture of lithium resource and precursor which was synthesized via a liquid coprecipitation method. The effect of reaction temperature, concentration of precipitator, sort of precipitator, and pH on property of precursor was studied. The precursors was prepared by taking 2 mol·L-1 LiOH as precipitator and adjusting to pH value using 10.5 NH3·H2O at 50℃. The effect of calcining teperature and time on the property of LiNi1/3Co1/3Mn1/3O2 was studied, too. The technique parameters of calcination condition were optimized. The ordered LiNi1/3Co1/3Mn1/3O2 prepared by pre-calcination for 6h at 500℃, and then secondary calcination for 12h at 900℃, delivered initial discharge capacity of 141.8 mAh·g(-1) in 4.3V~2.5V, and showed good cyclic property.The effects of Li(Ni1/3CO1/3Mn1/3)1-xMxO2(M=A1、Ti、Mg、x=0.02 ) doped various metal element were investigated. This study optimized focus on Ti doped materials. The Li(Ni1/3CO1/3Mn1/3)0.9Ti0.1O2 showed the best electrochemical property among several Li(Ni1/3CO1/3Mn1/3)1-yTiyO2. The Li(Ni1/3CO1/3Mn1/3)0.9Ti0.1O2 material exhibited the first specific capacity of 215.4 mAh·g-1 in 4.6 V~2.5V, 194.9 mAh·g-1 in 4.5~2.5V, 184 mAh·g-1 in 4.4~2.5V, respectively. CV test revealed cyclic property of Li(Ni1/3CO1/3Mn1/3)0.9Ti0.1O2 was reversible. Compared with the research results recently all over the world, the Li(Ni1/3CO1/3Mn1/3)0.9Ti0.1O2 cathode material as Li-ion batteries showed excellent electrochemical performance among the corresponding materials in this paper. The market expects to popularize application of this material in the future.

Related Dissertations

  1. Preparation and Properties of Silicon Carbon Anode for Lithium Ion Battery,TM912.9
  2. First- principles calculations of doped anatase titanium dioxide photocatalytic properties,O643.36
  3. Synthesis and Modification of Cathode Materials LiFePO4 and Li2FeSiO4 for Lithium Ion Battery,TM912
  4. Synthesis and Modification of Nano LiFePO4 as Cathode Materials,TM912
  5. Study on Synthesis and Modified of LiFePO4 as Cathode Materials,TM912
  6. Preparation and Research Electrochemical Properties of LiFePO4 for Cathode Material of Lithium-ion Batteries,TM912
  7. Porous electrode material of vanadium pentoxide Synthesis, Characterization and Properties,O614.511
  8. Graphite anode low temperature performance influencing factors and improving research,TM912
  9. New lithium -ion battery anode material Li 4 Ti 5 O 12 Preparation and Modification,TM912
  10. The Tin Oxide array electrode preparation and electrochemical properties of the anode as lithium,TM911.1
  11. Study on the Synthesis and Properties of LiFePO4 with Ferric Ions,TM912
  12. Study on the Improving Performance of LiFePO4 by Doping Mg and Mn,TM912
  13. The Application of a Novel Ternary Molten Salt in the Preparation of LiNi0.8 Co0.2O2 and LiNi1/3Co1/3 Mn1/3O2,TM912
  14. Prepared the Electrode Material and Electrochemical Properties of Lithium-ion Battery,TM912
  15. Design and Implementation on Battery Management System of EV,TM912
  16. The Preparation of Novel Lithium Ion Battery Separator by Plasma Technology,TM912
  17. Synthesis of Positive Materials of Modified Lithium Iron Phosphate and Their Electrochemical Performance,TM912
  18. Study on the Silicon-based Composites as Anode Materials for the Lithium Ion Batteries,TM912
  19. The Application Research on Estimation of Lithium-ion Battery SOC,TM912
  20. Preparation and Properties of Li4Ti5O12 as Anode Material of Lithium-Ion Batteries,TM912
  21. Research on Silicon Based Anode for High Capacity Lithium Ion Batteries,TM912.9

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Chemical power sources,batteries, fuel cells > Primary batteries,battery
© 2012 www.DissertationTopic.Net  Mobile