Dissertation > Excellent graduate degree dissertation topics show

The Application Study on of Single Carbon Supported Catalysts in the Zinc-air Battery

Author: LiuYu
Tutor: ZhangXiaoPing
School: Lanzhou University
Course: Radio Physics
Keywords: Single carbon supported catalysts Air electrode Zinc-air battery
CLC: TM911.41
Type: Master's thesis
Year: 2013
Downloads: 38
Quote: 0
Read: Download Dissertation


In recent years, the growing energy crisis, the development of new energy has been constantly researched. The performance of the zinc-air batteries for its high-capacity, high-efficiency, low-cost, discharge stable, clean pollution, security, raw materials, renewable, etc. has attracted the attention of researchers to solve the energy problem. So the zinc-air batteries have great market prospects. Based on the previous studies, this paper has done some research on zinc-air batteries as following:Comparison of the Co-Mn-O/C (single carbon supported oxidation of cobalt and manganese) catalyst and single carbon supported Ag catalyst, carbon loading silver cobalt and manganese dioxide catalyst on properties of zinc air battery, and the acetylene black and activated carbon ratio in the catalyst layer, which using the Co-Mn-O/C catalyst; then study the cobalt manganese molar ratio of Co-Mn-O/C catalyst, and the influence of Co-Mn-O/C catalysts prepared by different temperature on the battery zinc air battery; this paper also by adding charging auxiliary electrode, a study of Charge and discharge has been conducted on zinc air battery by the three electrodes system. And making the air electrode, designed and assembled the zinc air battery and a small button battery. The production of battery by electrochemical test, results showed that:with Co-Mn-O/C as catalyst in the battery compared to other catalysts has better volt-ampere characteristics, And the molar ratio of cobalt and manganese is1:3, the preparation temperature is350℃, the Co-Mn-O/C catalyst has the best catalytic activity. The battery can realize Charge and discharge after adding auxiliary charging electrode, the zinc plating additive DE is6mL/L and graphite as auxiliary charging electrode, the battery has better charge and discharge depth. Compared with the commercialization zinc-air battery production, the button battery has greater capacity.

Related Dissertations

  1. Preparation of the oxygen electrode catalyst and rechargeable zinc - air battery technology,TM911.41
  2. Preparations and Characteristics of Superhydrophobic Surfaces,TB304
  3. Study of Ag/C Catalyst Preparation and Its Performance,TQ426
  4. Preparation of Nanometer Perovskite-Type Oxide and Study on Its Properities,O643.36
  5. Study on Air Electrode of Zinc-Air Battery,TM911.41
  6. Preparation of Nanometer La1-XSrxMnO3 and Its Use in Air Electrode,TM911.41
  7. Research of Cylindrical Zinc-Air Battery,TM911.41
  8. Research of the Alkaline Zinc-Air Battery,TM911
  9. Perovskite oxygen reduction catalyst,TM911
  10. Preparation and Study on Zinc Electrode for Air Battery,TM911
  11. Application and Performance of the Air Electrode,TG156
  12. Study of Pt/C and Pt-Fe/C Electrocatalyst for Oxygen Reduction in View of Quantum Chemistry,O643.3
  14. Preparation of Electrolyte and Cathode for Electrochemical Oxygen Production,TQ116.14
  15. The Study on the Air Electrode with TM-N/C Catalyst,O643.36
  16. Fundamental and Applied Research on the Problems of Zinc-air Battery Systems,TM911
  17. Double effect oxygen electrode and its application,TM911.4
  18. Study on the Dry-Embedded Molding Mechanical Model of the Electrode Slice of the Zinc-Air Battery,TM911.4
  19. Preparation and Performance of the Nanometer La1-xSrxMnO3,TB383
  20. Study on Properties of the Air Electrode in Aluminum/Air Battery,TM911

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Chemical power sources,batteries, fuel cells > Fuel cell > Metal - air battery
© 2012 www.DissertationTopic.Net  Mobile