Dissertation > Excellent graduate degree dissertation topics show
Electrochemical Characterization of SOFC Cathode Material La0.6Sr0.4Co0.2Fe0.8O3-δ Nanofiber Prepared by Electrospinning
Author: ShaoYouJun
Tutor: LuoLingHong; ChenHuaLong
School: Jingdezhen Ceramic Institute
Course: Materials Science
Keywords: Electrospinning nanofiber SOFC cathode La0.6Sr0.4Co0.2Fe0.8O3-δ
CLC: TQ343.5
Type: Master's thesis
Year: 2013
Downloads: 10
Quote: 0
Read: Download Dissertation
Abstract
|
Nowadays, IT-SOFC(intermediate temperature solid oxide fuel cell) is a hot research. The performance loss of IT-SOFC is mainly caused by the polarization of cathode. Therefore, reducing the polarization of cathode is the key to develop IT-SOFC. Perovskite La0.6Sr0.4Co0.2Fe0.803.8(LSCF) are promising cathode materials for IT-SOFC due to excellent electronic and ionic conductivity, low coefficient of thermal expansion and superior electrochemical catalytic activity. The cathode structure is also crucial to the performance of cathode. The cathode with nanofiber network structure which has continuous path for conducting ion and electron, excellent electrochemical catalytic activity, and high percolation can greatly enhance the cathode performance.Electrospinning is a simple method for preparing nanofiber. La0.6Sr0.4Co0.2Fe0.803-δ(LSCF) nanofibers were prepared by electrospinning and the electrochemical characterization of the cathode with nanofiber network structure was investigated in this paper.The electrospinning parameters of PVP content, voltage, curing distance and feed rate were studied. The optimized parameters were as follow:PVP content2.5~2.9wt%, voltage12-16kV, curing distance11-15cm, feed rate0.5-0.7ml/h.The phase, element, microstructure of LSCF nanofibers were characterized by TG-DTA, XRD, SEM, EDS, TEM, respectively. A containing La, Sr, Co, Fe and O elements, diameter of130nm and length distribution of3-20μm perovskite LSCF nanofiber were obtained calcined at800℃.The LSCF nanofiber network structure cathode fabricated by electrospinning possessed outstanding electrochemical characterization. Polarization resistance of LSCF nanofiber network structure cathode were0.746Ω·cm2,0.517Ω·cm2,0.206Ω·cm2and0.106Ω·cm2at600℃,650℃,700℃and750℃, respectively. Using hydrogen as fuel and air as oxidant, the maximum power density of single cell(Ni+GDC||GDC||LSCF) with the LSCF nanofiber structure cathode were0.76W·cm-2and1.04W·cm-2, at650℃and700℃, respectively; while the maximum power density of single cell (Ni+GDC||GDC||LSCF) with LSCF nanofiber compounding20wt%GDC as cathode were0.88W·cm-2and1.2W·cm-2at650℃and700℃, respectively.
|
Related Dissertations
- Experimental Research on the Influence of Hollow Cathode to a Hall Thruster,V439.2
- The Preparation and Research of Magnetically Separable TiO2 Photocatalyst Nanofibers,TB383.1
- The Study of Preparation and Photocatalytic Activity of TiO2 by Electrospinning,O614.411
- Study on the Synthesis of the Polypyrrole-Cobalt Oxides and Their Catalytic Behavior for the Electroreduction of H2O2,O643.32
- Preparation and Characterization of Polymer Micro/Nano Fibers by Laser Melt Electrospinning,TQ340.64
- First-Principles Studies of Cathode Material LiMO2 (M=Co, Ni, Mn) of Lithium Ion Batteries,TM912
- First-Principles Studies of Cathode Material Srn+1TinO3n+1(n=1,2,3,∞) for Solid Oxide Fuel Cell,TM911.4
- PVA / Polystyrene Composite Nanofibers Preparation and Characterization,TQ340.1
- The Structure and Properties of Electronspun PSU Fibrous Membranes,TQ340.1
- Electrospinning nanofibers prepared polyacrylonitrile,TQ342.31
- Preparation and Properties of Reinforcements/ Polyacrylonitrile Composite Nanofibers,TB383.1
- Effect of Diameters of Silk Fibroin Nanofibers on the Growth and Migration of Olfactory Ensheathing Cells,R329
- Research and Development of Spidroin/Poly-L-lactic Acid Composite Nanofiber,R318.08
- Study of Isolation and Purification of Primary Schwann Cells of Rats from Different Parts of Nerve Tissue and Its Biocompatibility with Silk Fibroin Nanofibers Scaffold,R318.08
- The Performance Research of Coal-based SOFC/IGCC Combined Cycle Power Generation System,TM611.3
- Preparation and Characterization of Carbon Nanofibers Containing Fe,TQ342.742
- Preraration and Properties of Carbon Nanofibers and Their Composites,TB383.1
- The Study of Li-rich Layered Solid-Solution Cathode Materials for Lithium Ion Batteries,TM912
- Preparation of Poly(vinyl Alcohol)/Polyurethane Blend Nanofiber Mats and Their Fluorescent Modification,TB383
- Preparation of Nanofibers Modified Electrode and Its Electrocatalytic Properties,O646
- Preparation and Application of Biocompatible Nanocomposites,TB383.1
CLC: >
© 2012 www.DissertationTopic.Net Mobile
|