Dissertation > Excellent graduate degree dissertation topics show

Injection High-concentration Polymer Flooding to Improve Oil Recovery after Polymer Flooding Research

Author: WangZuoYun
Tutor: WuJingChun; SuYunXing
School: Northeast University of Petroleum
Course: Petroleum and Natural Gas
Keywords: polymer flooding high concentration polymer cnhanced oil recovery theremaining oil
CLC: TE357.46
Type: Master's thesis
Year: 2013
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


Polymer flooding is an effective method to improve recovery. It mainly reduce the mobility ratio of water and oil phase by improving water phase viscosity and reduce water phase permeability, so as to enlarge sweep volume. But there is still have a lot of residual oil underground after polymer flooding, these remaining reserves have huge potential for increase recoverable reserves and improve oil recovery. The study of remaining oil distribution features after polymer flooding shows that the remaining oil after polymer flooding of heterogeneous reservoir mainly distribution in middle and low permeability reservoir heterogeneity reservoir and injection-production well away from the wings of the mainstream line area. So for serious reservoir heterogeneity, it plays a very important role to further improve oil recovery for increase the use of middle and low permeable reservoirs after polymer flooding.Summary total5of industrialized polymer flooding in xingbei development zone block, as each block enter into late polymer flooding stage eventually, block water rebounded gradually speeding up. Coring and producing status information indicates that within the layers, layer effects and a flat contradiction, polymer flooding reservoirs within45%per cent of the reserves have not been used, three types of reservoir in tertiary oil recovery potential is not yet clear. In order to improve the development effect of polymer flooding in late, try to late polymer flooding block high-concentration polymer modified, research reserves further Eor after polymer flooding technology, in xinbei development zone sustainable stability and providing technical support.Based on field actual demand, in this paper, with reference to injection scheme adjustment principle, through study the degree of injection-production perfecting, reservoir development status of injection well and injectivity of high concentrations of polymer injection well group, improve the method of selecting well of high concentration polymer flooding, to provide a reference basis for carry out the change note high concentration polymer flooding wells of other polymer flooding block.

Related Dissertations

  1. The Research of Numerical Simulation for Polymer Flooding in Class Ⅲ Reservoir in Beierdong Block,P618.13
  2. The Technology Limits for Stratified Injection of Polymer Flooding in Sub-layers of Sabei Area,TE357.46
  3. The Evaluation Method Study of Reservoir Producing Degree for the Third Class Oil Layer during Polymer Flooding,TE357.4
  4. Laboratory Research on Response Discipline of Polymer Flooding in Heterogeneous Reservoir,TE357.4
  5. The Analysis and Study on the Systemic Efficiency of Rod-pumped Well for Polymer Flooding in Gudao Oilfield,TE933.1
  6. Study on the Optimization of High-concentration Polymer Flooding of the First-order Oil Reservoir at the Late Stage of Polymer Flooding in Sabei Development Block,TE357.4
  7. Feasibility Study on Major Reservoirs at Sazhong Area by Surfactant/Polymer Flooding After Polymer Flooding,TE357.4
  8. Study on Pressure Gradient Variation and Displacement of High Concentration Polymer Flooding,TE357.4
  9. The Research on Effective Technology of Chemical Flooding After Polymer Flooding,TE357.4
  10. The Research of Relative Permeability and Oil Displacement Efficiency of Polymer Flooding Based on Three-dimensional Network Model,TE357.4
  11. The Research on High-concentration Polymer Flooding Test in West Northern Block in Lamadian Oilfield,TE357.46
  12. The Utilization of the Reservoir Dissection Technology in the Advancement Recovery Ratio of Polymer Flooding,TE357.46
  13. High concentration of polymer viscoelasticity testing and reasonable concentration of polymer injection,TE357.4
  14. The Experimental Research on Surfactant-Polymer System Enhances Oil Recovery after Polymer Flooding,TE357.46
  15. Study on Enhanced Oil Recovery Technology after Polymer Flooding,TE357.4
  16. Research on the Remaining Oil Distribution and Description after Polymer Flooding,TE357.4
  17. The Studies on Dynamic Performance Analysis of Polymer Flooding in SABEI Oilfield,TE357.46
  18. Research on the Compatibility of Different Polymer Flooding Slug Combination in Second-class Reservoir,TE357.4
  19. The Experimental Study of Well Pattern Infilling and Well Pattern Sparsing on the Impact of Polymer Flooding Effect,TE357.6
  20. Crosslinked polymer flooding numerical simulation,TE357.46
  21. The Field Test Research on Polymer Flooding for the Third Class Oil Layers in Daqing Oilfield,TE357.46

CLC: > Industrial Technology > Oil and gas industry > Oil and gas development and mining > Production Engineering > Enhanced oil recovery and maintain reservoir pressure (secondary and tertiary oil recovery ) > Thermal, miscible , Chemical Oil Recovery (EOR EOR ) > Chemical flooding
© 2012 www.DissertationTopic.Net  Mobile