Dissertation > Excellent graduate degree dissertation topics show

A Study on Viscoelastic Properties of Three-dimensionally Braided Composites

Author: YuanXin
Tutor: SunHuiYu
School: Nanjing University of Aeronautics and Astronautics
Course: Engineering Mechanics
Keywords: 3D braided composites elastic properties viscoelastic properties complex modulus periodic microstructures homogenization method finite element method
CLC: TB332
Type: Master's thesis
Year: 2012
Downloads: 93
Quote: 0
Read: Download Dissertation

Abstract


Viscoelasticity is one of the most important properties of3D braided composites; howeverthere is little research on this subject. In this paper, the viscoelasticity of3D braided compositeshas been studied.Firstly, according to the meso-structures of materials, the unit cell models of3D braidedcomposites are constructed, in which the sectional shapes of different kinds of yarns aredistinguished and the adjacent yarns can contact closelySecondly, based on the homogenization theory, the elastic properties of3D braidedcomposites are predicted, and the influence of braided structures and processing parameters(braiding angle, fiber volume fraction) on the elastic properties is also studied. It is shown thatwith the increase of fiber volume fractions, the elastic moduli of3D braided composites in thebraiding direction increase, while with the increase of braiding angles, the elastic moduli of3Dbraided composites in the braiding direction decrease.Then, the viscoelastic properties are studied by expanding the homogenization method in theelastic domain to the viscoelastic domain, and the influence of braided structures and processingparameters on the viscoelastic properties is also studied. It is shown that with the increase ofbraiding angles, the viscoelastic properties of3D braided composites in the braiding directionincrease, while with the increase of fiber volume fractions, the viscoelastic properties of3Dbraided composites in the braiding direction decrease.Furthermore, by using the relationship between the static and dynamic viscoelastic properties,the dynamic viscoelastic properties of3D braided composites are studied.Finally, the relaxation moduli of resin-based3D braided composites were calculated underdifferent temperatures. Then a general method for determining the relaxation moduli undervariable temperatures from those under constant temperatures for resin-based3D braidedcomposites was constructed.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  4. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  5. Dynamics Analysis and Optimization Design of Hydraulic Excavator Working Equipment,TU621
  6. The Finite Element Analysis and Simulation of Excavator Working Device,TU621
  7. Behavior of Installation and Seepage Law of Offshore Skirted Suction Foundation for Offshore Wind Turbines,P75
  8. Sensitivity Analysis on Fatigue Reliability of a Turbine Disk Using Finite Element Method,V232.3
  9. Study on Dynamic Space Structure of Groundwater on Land Use,P641.8
  10. Fatigue Analysis and Life Prediction of a Loader’s Drive Axle Housing,TH243
  11. The Fatigue Life Study of a Car Body Based on the Random Vibration,U463.82
  12. Fatigue Reliability Sensitivity Analysis of High Speed Rail Axle,U270.3
  13. Electrical Impedance Tomography numerical solution of the problem in some studies,O441.4
  14. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  15. Numerical and Experimental Studies for Multi-Cracks of Asphalt Pavement with Semi-Rigid Basement Asphalt,U416.217
  16. Loss Characteristics of Infrared Hollow-core Bragg Fiber,TN253
  17. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  18. Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
  19. A Model for the Pull-in Parameters of Torsional Magnetostatic Actuators with Fringing Effect,TP211.4
  20. Experimental Research and 3D Modeling of EPS Cellular Concrete,TU528
  21. Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile