Dissertation > Excellent graduate degree dissertation topics show

The Development and the Key Technological Research on Roll to Roll Nano-imprint Experimental Platform

Author: TangQiSheng
Tutor: WangXuDi
School: Hefei University of Technology
Course: Mechanical and Electronic Engineering
Keywords: Roll-to-Roll Nanoimprint Lithography(R2RNIL) demolding nano-patterning continuous replication finite element analysis (FEA)
CLC: TB383
Type: Master's thesis
Year: 2012
Downloads: 97
Quote: 0
Read: Download Dissertation

Abstract


As a replicating technology, nanoimprint lithography (NIL) has the advantageof high resolution, high thoughout and low cost for nano-patterning fabrication,opening up a large range of applications. It has been brought into InternationalTechnology Roadmap for Semiconductor (ITRS), becoming one of representativetechnologies in the22nm node fabrication. However, in conventional nanoimprint,the photoresist is imprinted by the whole mold at one time and only replicate onepatterning through a process. The throughput is still far from meeting the demandsof industrialization. Meanwhile, for replicating large area nano-patterning, it needsvery high force in imprinting and demolding process. Moreover, the mold and thepatterning on resist layer can be destroyed easily. Taking the advantage of flexiblemold, a new technology named roll-to-roll nanoimprint lithography (R2RNIL) ispresented in this article. By imprinting and demolding partly, it can replicatenano-patterning continuously at low pressure.Firstly, the process of R2RNIL is introduced and the material of template,photoresist and the substrate in R2RNIL are discussed. Then, a roll-to-rollapparatus is designed to replicate different resolution of nano-patterning onpolymer resist which is coated on PET.Demolding is the key process in R2RNIL. There are sorts of defects such asabrasion, crack and deformation which may appear in the process. Firstly, thedemolding ways in R2RNIL are analyzed. Secondly, the condition to successfuldemolding is calculated through surface theory. The size of forces to peel offparallel and sidewall contact surface are calculated. Lastly, the stress distributionon contact surface during demolding is simulated via finite element analysis.A new technology and system to fabricate fluidic nano-channel on polymerlayer continuously is developed by combining R2RNIL with plasma polymerization.The technology is demonstrated by experimental result.

Related Dissertations

  1. Breathable steel -based microfluidic chip ejection system pneumatic suction experimental study,TN492
  2. The Analysis of Ultimate Longitudinal Strength of Ship Hull Girders,U661.4
  3. Numerical Modeling of Pre-and Co-seismic Deformation of the Mani Ms7.9 Earthquake Revealed by Using D-InSAR Technology,P315
  4. The Mathematical Model of Drilling Force and FEA of Gun-drill with Planar Flank,TG52
  5. Study of the Demolding Process in Hot Embossing of Polymer Microfluidic Chip,TQ320.66
  6. Fabrication of Nanostructured ECM-Mimetic Interfaces for Control of Cell Adhesion Behaviors,TB383.1
  7. R&D of H/V Head Stock Parts of Five-side Machining Center,TG659
  8. Experiment and Numerical Simulation on Fire Performance of Concrete Filled Stainless Steel Tubular Columns,TU398.9
  9. Finite Element Analysis and Springback Prediction of the Press Bending of U-shaped Section Steel Part,TG386.31
  10. The Characteristic Analysis of the High-speed Railway Roadbed Section’s Integrated Grounding System,TM862
  11. Design of 250t Crawler Crane Boom,TH213.7
  12. Experimental Research on Concrete-filled Squared Tubular Column to H-shape Steel Beam Connection,TU398.9
  13. Research and Design of Three-phase Magnetism Valve Type Controllable Reactor’s,TM47
  14. Improving the Light Leakage Phenomenon of LCD Panel by Using Taguchi Method,U463.6
  15. Experimental Studies and Simulation Analysis on Dynamic Response and Residual Strength of H-shaped Steel Member under Lateral Impact,TU392.1
  16. Research Application of Rubber Components Finite Element Analysis,TQ330.1
  17. Finite Element Analysis of Stresses in Face Gear Driving,TH132.41
  18. The Crankshaft Parametrical Model Technique and Intensity and Study of Residual Deforming in Rolling,TG376
  19. Experimental and FEM Investigations on the Puncture Behaviors of Woven Fabrics,TS101.923.1
  20. Study on Vibration and Noise of Deepwater Semi-submersible Drilling Unit,U674.381

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile