Dissertation > Excellent graduate degree dissertation topics show

The Design and Application Research of Dimples Measurement and Classification System in Steel

Author: GuoZuoZuo
Tutor: LiXinCheng
School: Jiangsu University
Course: Mechanical and Electronic Engineering
Keywords: dimple measurement and classification system characteristic extraction threshold segmentation mathematical morphological
CLC: TG142.1
Type: Master's thesis
Year: 2009
Downloads: 24
Quote: 0
Read: Download Dissertation

Abstract


In each kind of steel and iron material’s break failure analysis,we may understand that the breaking-down process the mechanism and the reason, subsequently verify enhance the materials mechanics performance the influencing factor by the fracture organization’s microscopic analytical study.Therefore,the qualitative and the quantitative analysis for fracture have the important fundamental research significance and the project application value.However,at present we can only depend upon the specialists to analyze dimple by the manual survey statistics pattern,and so the precision as well as the efficiency is low inevitably,and serious influence following material quality control work.Making full use of the achievements of primary researches and combining the present situation of our country digital image processing technology in the quota metallography,this paper,financed by the State Natural Science Foundation project and the Jiangsu University mold scientific innovation project,Has established the survey taxonomy system of dimple for the first time.This system mainly used the image processing way of filter,gray level amendment,division and so on to process the image of dimple,and utilized the morphology way of corrode methods and inflation to repair dimple.And the system use the way of improved based on the Freeman chain code multi-region area algorithm area of measurement to measure area. Main contents and innovations,1.First we analyze some kinds of algorithms of image processing,and obtain the suitable method on the base to analyze dimple characters.Namely we apply median filtering method to process image to eliminated effects of all kinds of noise in the image and modify the gray scale of picture to increase its contrast.2.In paper we introduced an adaptive method for image thresholding based on index of fuzziness to divide dimple from background,and eliminated the fuzzy characteristic which in the nest image existed,simultaneously retained the dimple edge feature.We used the morphology method and the scan line filling algorithm to solve the defects which exist in the dimple image.3.According to the dimple characteristic,this article used an improved multiregional area algorithm based on Freeman chain was presented to measure dimple.The results showed that the system has good effective for the processing of dimple images.With the above studies,the research is to provide essential theoretical evidence and technological basis for the further development of dimple quantitative classification analysis work.

Related Dissertations

  1. Citrus Image Segmentation Based on Genetic Algorithm,TP391.41
  2. Study on Control Schemes for Turbulence Drag Reduction by Active Dimple Deformation,O357.5
  3. Investigations on Heat Transfer Enhancement of Free Surface MHD Flow,TK124
  4. Research on Characteristic Extraction of LFM Radar Signals,TN957.51
  5. Methods and System Implementation on Three-Dimensional Attitude Measurement Based on Monocular Vision,TP391.41
  6. The Intelligent Parking VLPR Study and Scheme Design,TP391.41
  7. The Application of Image Analysis Technology in Granular Material Fabric Image Measurement,TP391.41
  8. Micro Array-dimples Produced by Electrochemical Micro-machining on Surface,TG662
  9. The Research of Segmentation for VCH-F1 Slice Image,TP391.41
  10. Study and Application of Image Thresholding Method Based on PSO Algorithm,TP391.41
  11. Research and Implementation of Leaf Parameter Measuring System Based on Image Processing,TP391.41
  12. HUD Image Vibration Detecting System Base on Improved Features Extracting Algorithm,TP391.41
  13. Research on Moving Targets Detection and Tracking in Video Sequences,TP391.41
  14. The Monocular Vision Target-location Methods Based on Cross-ratio Invariants,TP391.41
  15. Research on Algorithm of Lung Nodule Detection Based on the Image Processing Technology,TP391.41
  16. Research on Technology of Reverse Analysis on Embedded Linux System,TP316.81
  17. The Research on Automatic Identification System for the Microscopic Images of No Chaetoceros Harmful Algae,TP391.41
  18. Research and Implementation of CAD on the Pathological Slices of Gastric Adenocarcinoma,TP391.41
  19. Density-based clustering algorithm,TP311.13
  20. Habitation Extraction and Edge Optimization,P237
  21. Automatic Registration of Terristrial Lidar Data Using Planar Targets,P225.2

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Steel > Microstructure and properties of steel
© 2012 www.DissertationTopic.Net  Mobile