Dissertation > Excellent graduate degree dissertation topics show

Based on the study of cold-formed steel unit capacity LabVIEW parameter test system

Author: GuoMin
Tutor: WuBoNong; ZhaoZhiCheng
School: North China University of
Course: Mechanical Engineering
Keywords: sensor virtual instrument mechanical property parameters testingsystem
CLC: TG305
Type: Master's thesis
Year: 2012
Downloads: 18
Quote: 0
Read: Download Dissertation

Abstract


With the development of manufacturing, the finite element simulation of the metal plastic forming process has become an effective way to scientific predict and quantitative control in the plastic forming process. However, theoretical research results and numerical simulation results often have big discrepancy with that of the actual situation, we must adopt the experimental method to test, amend and supplement the results. Cold roll-forming process is a complex process, which is subjected to many factors. At present, the roller design is mainly dependent on empirical design, relying on trial and error process to get the technology law, which is lack of forming theory. In the article, a set of test system is designed to measure the rolling force, torque and rotational speed of cold roll-forming process, which can help to achieve real-time monitoring, to promptly grasp the unit parameters, to reduce debugging time, and to improve production efficiency. On the other hand, along with rapid development of the computer industry, CPU operation speeds, the memories increase, the entire computer performances improve continuously. That all make it possible for the further development of the virtual instrument and the improvement of its feasibility.Based on the mechanical property parameters of cold-formed steel unit, in the test system force sensors, torque sensors and speed sensors are designed to acquired the real-time signals of rolling force, torque and rotational speed. Those signals are conditioned by SCXI (invented by NI company), then respectively sent into the data acquisition card NI SCXI-1520and NI PXI-6229/6624, Then we can storage and analysis them, at the same time, we can build a mechanical property parameters testing system work interface of cold-formed steel unit through the LabView software programming.By this testing system using virtual instrument and sensor technology, we can make a complete test and analysis to the parameters of cold-formed steel unit. The system could not only complete data acquisition and processing reliably and exactly, but also generate the corresponding parameters and test results, which well satisfies the needs of the parameters testing. This technology can be applied to other related fields. The study of the mechanical property parameters can provide scientific data for the development of new products, the improvement of production process and product quality, and the control of production cost.

Related Dissertations

  1. Research on Magnetic Field Sensor Based on GMI Effect and Geomagnetic Matching Algorithm,P318
  2. Soft Sensor of Naphtha Dry Point on Support Vector Machines Regression,TE622.1
  3. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  4. High Speed Frequency Measurment and Non-Linearity Correction of Frequency Modulated Capacitive Displacement Sensor,TH822
  5. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  6. The Research of Navigation Multi-Sensor Data Fusion Technology Based on Micro Unmanned Platform,V249.32
  7. Research on the Image Acquisition System Based on CMOS Star Sensor,V448.2
  8. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  9. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  10. Design and Implement of Multi-Port Network Communication Platform,TN929.5
  11. Research on Intelligent Learning-Based Multi-Sensor Target Recognition and Tracking System,TP391.41
  12. Research on Joint Target Detection for Dual-Sensor Image and System Implementation,TP391.41
  13. Research on Spaceborne Hyperspectral Sensor Simulation,TP391.9
  14. Development of Experimental Robot Control System Based on ARM,TP242.6
  15. Gradual Event Detection in Sensor Networks,TP212.9
  16. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  17. Data Aggregation Scheduling Algorithms in Wireless Sensor Networks,TP212.9
  18. Research and Improvement of WSNs Routing Algorithm Based on Geographic Location,TN929.5
  19. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  20. LabVIEW-based virtual oscilloscope design and remote control,TM935.3
  21. The Power Quality Monitor Based on Virtual Instrument,TM76

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > General issues > Pressure processing equipment
© 2012 www.DissertationTopic.Net  Mobile