Dissertation > Excellent graduate degree dissertation topics show

Calculation of the Thermal Stresser and Fatigue Life of Coating Roll in Liquid-core Rolling Mill

Author: WangChunYing
Tutor: XuShiMin; SunDengYue
School: Yanshan University
Course: Mechanical Design and Theory
Keywords: liquid core heavy reduction roll coating surface treatment the finite element the thermal and stress fields fatigue life
CLC: TG333.17
Type: Master's thesis
Year: 2012
Downloads: 69
Quote: 0
Read: Download Dissertation

Abstract


The continuty and compactness of rolling process has become the new developmentdirection and mainstream of rolling technology. With the rising price of raw material、reducing profits and increasing emphasis on the concept of energy saving and emissionreduction, liquid core reduction technology gets widespread concern because it plays animportant role in slab thinning and inner quality improvement of slab. Now manyresearchers make it a new focus. As the most damageable part in cast-rolling process, theroll’s life has a direct effect on the quality of products and benefit. So as to improve thelife of roll, online heat-resistant and surface coating have been used to change the heattransfer condition of cast-rolling system to reduce consumption of roll.This paper makes a detailed introduction to online heat-resistant technology、surfacecoating technology especially laser cladding technology. On the selection of the coatingmaterial, this paper analyzes the coating materials’ performance with detailed parameters.In the end, introduce the choice of coating thickness.In this paper, based on twin-roll liquid core mill, the boundary conditions of roll’sthermal field are confirmed, which contain the simplification of roll’s model, theassumptions on solving and definite condition. The final thermodynamics parameter ofroll’s temperature field are determined by the heat flux equilibrium equation between theroll and work piece.The finite element software ABAQUS was used to construct the models of rollwith/without surface coating and then simulate the cast-rolling process. This paperanalyzes the thermal field and stress field of the after rolling roll with different coatingmaterials and thickness, summarizes the influence of different coating material andthickness on relative parameters of roll, then chooses a better coating material.Combining the metal cumulate damage theory and rupture mechanics theory, thispaper analyzes the cause of fatigue failure of the roll. Through ABAQUS simulation thispaper gets the distribution rule of the roll’s thermal and stress fields, and then combinesthe results above with FE-SAFE software, estimates the lifetime of the roll surface with/without coating; analyzes the law of forming fatigue cracks on roll surface.

Related Dissertations

  1. Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. EDM Electrode Wear Mechanism and Control Research,TG661
  4. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  5. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  6. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  7. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  8. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  9. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  10. A Study on the Electrodeposition of Zn-Co and Zn-Ni Alloys in the Reline Room Temperature Ionic Liquid,TQ153.1
  11. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  12. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  13. Design of Testing Equipment for Electronic Products,TN06
  14. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  15. Preparation and Performance of V2O5-WO3/MOx/Cordierite Catalyst Modified with Cu、Mn、Ce for DeNOx,X701
  16. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  17. Anti-corrosion Property of Flake Zinc Epoxy Coating Doped with Rare Earth in SRB,TQ630.1
  18. S-lay Installation Analysis for Deepwater Pipeline,TE973
  19. Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
  20. Study on Chitosan-Based Composiate Nano-Coating Dope and Its Effect of Fresh-Keeping for Coated Egg,TS253.2
  21. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling mill machinery equipment > Bodies and equipment of the mill primary columns > Roller and roller bearings
© 2012 www.DissertationTopic.Net  Mobile