Dissertation > Excellent graduate degree dissertation topics show

The Design of Numerical Control System for Piston Soft Template Technology Based on DSP

Author: JiangLianGuo
Tutor: QianXiaoLong
School: Northeastern University
Course: Control Theory and Control Engineering
Keywords: DSP Soft template Giant Magnetostrictive IGBT
CLC: TG659
Type: Master's thesis
Year: 2010
Downloads: 24
Quote: 0
Read: Download Dissertation

Abstract


Soft template technique is widely used in digital control machine tool system for middle-convex and varying ellipse piston machining, due to its high machining efficiency, high ellipticity, high flexibility and so on. The application of soft template technique makes higher performance demands on turning tool feed rates system of machine tool. For instance, high frequency response, precision, rigidity and well controllable must be satisfied.The operating current range of turning tool feed rates system is5A DC-50A DC and operating voltage is550V DC. It has the advantage of simple mechanism configuration, low cost, well controllable, convenient for maintenance and high control precision, because the turning tool feed position is adjusted according to load current variation. The current of turning tool feed rates system is controlled by IGBT on and off under PWM method, as a result, the turning tool move forward and backward by μm along the X axis.This design uses TMS320F2812as the arithmetic and control unit, EPM1270T144C5as the assistant processing and monitoring unit, sufficiently uses the advantage of DSP and CPLD to improve the system response and control precision, and reduce the design of the circuit. DSP compute the output according to the turning tool position feedback and control the soft template machining. In the machining process, the processing unit determines the turning tool relative position of vertical axis (Z axis) and section axis (X axis) of machined piston profile, according to the signal of Z axis and X axis coder, reads the soft template curve data simultaneously and then make a new output data by comparing this curve data with the data of the position sensor and PI operation, controls the turning tool position, realizes piston machining in terms of output curve tracing soft template curve.The aim of this dissertation is searching a new approach of soft template numerical controlled machine tools, using a new turning tool feed rates system controlled by current strain micro-displacement of Giant Magnetostrictive. It provides high machining precision as well as low cost.

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. Research on Synchronous Motor Excitation Control System,TM341
  6. Study of Three-Phase AC Chopper Surge and Its Harmonic Elimination Technology,TM423
  7. The AES Algorithm and Its Implementation in DSP,TN918.1
  8. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  9. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  10. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  11. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  12. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  13. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  14. A Study on the Technology of the Infrared Image Matching,TP391.41
  15. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  16. Synthesis and Characterization of Polyaniline Micro/nano Structure and Its Composites,TB383.1
  17. High Harmonic Generation Inverter Method for Suppressing,TM921.51
  18. Study on DSP-based Double-wire Welding Machine and Its Human-machine Interface,TG409
  19. Hybrid Stepping Motor Servo System Based on DSP,TM383.6
  20. Design and Realization of Three-Level Solar Inverter Based on DSP&FPGA,TM464
  21. Design of the High Voltage Pulse Power Supply Base on the Ac/dc Superimposed Technology,TM46

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile