Dissertation > Excellent graduate degree dissertation topics show

Structure Design Andanalysis of Low Temperature Characteristics of Large Vacuum Testing Platform

Author: ZhangXueFeng
Tutor: FangZhenYong
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: Testing platform cryogenic material temperature field transient thermalanalysis
CLC: P236
Type: Master's thesis
Year: 2013
Downloads: 0
Quote: 0
Read: Download Dissertation

Abstract


Large vacuum testing platform is the key equipment for ground testing spacephotogrammetry technology, with the development of space photogrammetrytechnology, and the size and weight of mapping camera is large, the position accuracyrequirements are increasingly high, the ground simulation equipment has put forwardhigher requirements. In addition, testing platform to work in normal vacuum materialissues to consider. In a word, has very important significance for the development oflarge vacuum testing platform.Firstly, the overall design of the overall structure of large vacuum testing platform,a preliminary scheme of large-scale vacuum testing platform to get. Large vacuumtesting platform is a four-dimensional motion platform, including the pitching motion,the lifting movement, horizontal movement and position adjustment movement. In thispaper, the pitching motion and the lifting movement on it to do a detailed design,calculation of the rotary accuracy of pitch axis. This paper designs the unloading system.In order to verify the structural design, the finite element method for structuralsimulation analysis of statics and dynamics analysis of the structure, the unloading andwithout unloading under two conditions of stress and deformation. In addition, themovement of the lifting platform process, analyzes the stress state. For the wholestructure of the modal analysis, the natural frequency of the whole model and thevibration mode was.On the material performance changes under low temperature conditions wasanalyzed, the large vacuum testing platform material was determined, and the materialunder low temperature linear expansion coefficient were measured experimentally, andthen the fitting of the materials of the specific heat capacity and thermal conductivity,performance parameters of low temperature conditions are obtained, made full for thethermal analysis of vacuum testing platform.Finally, the application of finite element method for the transient thermal analysisof the temperature control system of heating process of large vacuum testing platform,get the model of the temperature field distribution changes with time. Then, thedifferent time the node temperature field is loaded into the model to get the thermaldeformation and stress variation with time, the temperature distribution and thermalheating way comparison of different stress get the size of heating mode optimization,and provide a theoretical basis for the adjustment of the temperature control system.

Related Dissertations

  1. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  4. Research and Improvement stove metal casting production systems,TG23
  5. Friction Stir Welding Temperature Field Measurement and Analysis,TG453.9
  6. Research on Some Dynamic Characteristics of Complex Rotor System,TH113
  7. Study of Micro Electron Mechanical System Performance Based on Temperature Field of Casimir Potential Energy,TH703
  8. Numerical Simulation of the Process of Manufacturing Metal Parts by Plasma Powder Deposition Manufacturing,TG664
  9. The Research on Small Scale Meteorology Model in Imitating Effect of Urban Landscapeconstruction,S731.2
  10. Research of H-beam Steel after Ultra Fast Cooling,TG335.4
  11. Heat-fluid Coupled Analysis on Convection Heat Transfer and Temperature Field of Gears,TH132.41
  12. Micro hybrid spindle effect of temperature on the dynamic characteristics of the theoretical and experimental study,TH133.36
  13. Iron sand casting crank -type cladding temperature field simulation and production line automatic control of,TG242
  14. Butt welding of hull shapes Numerical Simulation and Optimization,U671.8
  15. Wet clutch slippery MICROGLEIT resistance and thermal load characteristics research,U463.211
  16. No leakage electric pump Loss Analysis and axial force balance new method for research,TH38
  17. Shimoji different geographical pipe pipe arrangement within the group of soil temperature,TU831
  18. Cracks in concrete basement raft formation mechanism and numerical analysis,TU471.15
  19. Permafrost temperature field of heat pipe subgrade,U416.1
  20. Study on Two Dimensional Ultrasonic Vibration Grinding Temperature Field Distribution Character of Nano ZrO2 Ceramics,TG580.6
  21. Variable conditions in orbit, the spacecraft solar wing thermal - structural analysis,V442

CLC: > Astronomy,Earth Sciences > Surveying and Mapping > Photogrammetry and Surveying, Mapping and Remote Sensing > Satellite Photogrammetry and space photogrammetry
© 2012 www.DissertationTopic.Net  Mobile