Dissertation > Excellent graduate degree dissertation topics show

Application Research of State Observer in Angle of Depression Control System of Aerial Camera

Author: ZhangXueFei
Tutor: DingYaLin
School: Graduate Schoo,Chinese Academy of Sciences
Course: Optical Engineering
Keywords: aerial camera full order state observer reduced order observer angularacceleration discrete sliding mode control acceleration feedback control multiple mode switched control fuzzy control
CLC: V245.6
Type: PhD thesis
Year: 2012
Downloads: 199
Quote: 0
Read: Download Dissertation

Abstract


Aerial camera as one primary load form of aerial remote sensor with advantages ofhigh efficiency, strong purpose and high mobility is used to obtain ground information.With the development of science technology and the promotion of aerial cameratechnological level, aerial camera of high precision positioning, long focal and dualband become a trend in future. State observer basis of modern control theory is appliedinto aerial camera for the first time in this dissertation. The control plant is the angle ofdepression control system of a long-focal CCD camera. The research on state observeris from three aspects of theoretical analysis, numerical simulation and application. Theangular acceleration observed is applied in speed control and position control of theangle of depression system. Compared with traditional control method, the dynamiccharacteristics, steady precision and disturbance rejection ability of the angle ofdepression control system are improved by modern control methods based on stateobserver.The mathematical model is given by frequency domain method firstly. Based onimplementation of state function and linear system theory, state observer is constructed.Lyapunov’s law is used to prove stability of state observer. Pole placement, phasecharacteristics and robustness of state observer are analyzed.State observers ofdifferent inertial space are studied according to feature of measuring element and the feasibility of aircraft rolling attitude angular estimated is verified by theoreticalanalysis and numerical simulation.Discrete sliding mode control theory with different reaching law is analyzed andnumerical simulation show that discrete sliding mode control method with powerfunction reaching law can not only eliminate the problem of chattering, but alsoimprove dynamic characteristics. A method of acceleration feedback control isproposed.The effect of system closed-loop bandwidth caused by acceleration feedbackgain is studied and the torque disturbance rejection principle is analyzed.The digital controller is designed used the method of multiple mode switchedcontrol based on T-S fuzzy inference which can realize combining accelerationfeedback control and discrete sliding mode control effectively. Speed control isachieved with setting time of0.128second and precision of0.875%when referenceinput is6°/s. The external disturbance with software programming and manual to provethe ability of disturbance rejection.Compared with conditional lead-leg method, themethod in paper can obtain uniform brightness image.Position control of SISO fuzzy control is achieved rapid and no overshoot locationduring working range.The photography efficiency test indicates that photographyefficiency is risen from58%to72%and more image information can be obtained. Thephotograph begin position test verified the maximum relative error of ground widthcaused by control method is only0.4%, which meets the index requirement.The work of the dissertation indicates that modern control methods based on stateobserver can attain and even exceed the control performance of traditional controller. Anew thought is presented for design of aerial camera control systems.

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  4. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  5. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  6. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  7. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  8. Study on Optimization of Urban Traffic Signal Herarchical Control Based on Fuel Cost,U491.51
  9. Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
  10. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  11. Research on Automatic Control System of Hump Push Peak Speed Based on Fuzzy Neural Network,U284.6
  12. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  13. The Research of Fuzzy Adaptive Soft Start Control on AC Asynchronous Motor,TM343
  14. Control Scheme of Switched Reluctance Generator Used in Wind Power System,TM352
  15. Based on the "Five Zones" Fuzzy Control for Substation Voltage and Reactive Power,TM761.1
  16. Obstacle Avoidance of Mobile Robot Based on Multi-sensor,TP242
  17. The Simulation Perfermence and Analysis for Election Control Hydraulic Litmitedslip Differential of Loader Based on Fuzzy Control,TH243
  18. The Research of Intelligent Car Path Planning Based on the Genetic Algorithm,TP242
  19. Research of Energy Saving Control System of Pumping Unit Based on Fuzzy Control with Self-tuning of Scaling Factor,TE933.1
  20. Research of Thin Slab Continuous Casting Mould Level Control System in BX Steel Corporation,TF341.6
  21. Design and Research of Drivetrain and Control Strategy for Solar-assisted Electric Vehicle,U469.721

CLC: > Aviation, aerospace > Aviation > Aircraft instrumentation,avionics, flight control and navigation > Auxiliary equipment > Photographic equipment
© 2012 www.DissertationTopic.Net  Mobile