Dissertation > Excellent graduate degree dissertation topics show

Staggered-Grid Finite Difference Method for Numerical Simulation of the Improved BISQ Model

Author: GuoZuoZuo
Tutor: ZhangXinMing
School: Harbin Institute of Technology
Course: Applied Mathematics
Keywords: Staggered-mesh finite difference method Improved BISQ model Perfectly matched layer (PML) method FCTmethod
CLC: P631.4
Type: Master's thesis
Year: 2011
Downloads: 40
Quote: 0
Read: Download Dissertation

Abstract


Seismic wave exploration is the most widely used method for exploration and development of energy resources. Most of the major mineral and energy resources are buried in the Earth’s lithosphere,which is of complicated geometry structures and complex physical properties.In practical engineering exploration, the complicated structure in the stratum which contains natural resources is usually simplified to a model in order to apply numerical simulation. It is hard to avoid errors during the simplification, which is because it will cause the inaccuracy in numerical simulation and thus will not match with the actual underground conditions. Therefore, establishing a more realistic numerical simulation of geological structure is the key of quickly resolving the issue in the field of seismic exploration nowadays.In seismic exploration, the two-phase medium wave theory can be used into practice to solve the problem of exploration. Seismic waves can be regarded as elastic waves spreading in the bed stratum, and elastic theory is the foundation of the elastic waves study. The paper is based on the numerical simulation with finite difference method by improving BISQ theory, and Improving BISQ theory is based on Biot assumption. Solid skeleton and interconnected pores form the fluid saturated porous media, and connected pores is filled with viscous fluid which is flow and can be compressed. The media formed by the solid skeleton and the fluid media is the basis of the theoretical research, which is closer to exploration and the actual situationStaggered-grid finite difference method is widely used in the numerical simulation of the two-phase media in the Seismic wave. Based on the improved BISQ model, we transform the elastic wave equation with two-dimensional (x, z) case into difference discrete situation with the method of staggered-grid finite difference, then use perfectly matched layer PML to absorb boundary reflection. By improving the PML difference scheme with the method of assigning the average of its two adjacent grid points to the variable in semi-grid point, we can eliminate the effect of artificial boundary reflection effectively. Then, by using FCT (Flux-Corrected Transport) simulation to suppress the numerical dispersion, we finally achieve numerical simulation for single and double-phase geological model. After getting wave field maps and synthetic seismograms, we further analysised and discussed the characteristics of the fast primary wave, low primary wave and S wave. At the same time, the impact of the selection of the different diffusion factors to the numerical dispersion effect in FCT method is also being analysised. The numerical simulation then explains the feasibility of the improved format discrete PML. Finally, the single and double numerical simulation of the geological model. Numerical simulation by observing the snapshots and synthetic seismograms, wave field analysis and discussion of the characteristics of the solid phase, fluid phase of the fast P wave, slow wave, wave characteristics discussed. Both methods suppress the observed numerical dispersion and the perfectly matched layer absorbing boundary reflection effect.

Related Dissertations

  1. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  2. Adaptive Homopoty Method Using Conjugate Gradient Algorithm for Inversion of Two-dimensional Wave Equation with Well Log Constraint,P631.81
  3. DC Law exploration infinity pole impact and Calibration Technology,P631.3
  4. Study on Radio Wave Penetration Technology for Mechanized Coal Face,P631.325
  5. A Study on Application of Seismic Waves to Tunnel Advanced Geological Prediction,P631.4
  6. Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
  7. Waste Road density points seismic signal automatic identification and picking first method,P631.4
  8. Magnetic Source Design of Rotary Magnetic Ranging System,P631.23
  9. Micro Seismic Response Characteristics Research of Coal Fracture,P631.4
  10. Study of the Elastic Parameters Inversion Base on Improved Immune Algorithm,P631.4
  11. Study of High-resolution Multi-channel Shallow Seismic Data Acquisition and Processing in Offshore,P631.4
  12. DMO Correction Technic of P-SV Converted Waves,P631.4
  13. Study on High-precision Method of Shallow Profile Seismic Data Processing and Interpretation,P631.4
  14. Research of Offset VSP Data Processing Methods,P631.4
  15. Seismic data random interference suppression technology research,P631.44
  16. Main Energy Spiking Deconvolution,P631.4
  17. Seismic Acquisition Technique Research on Southwest Qaidam Basin,P631.4
  18. A Study on Atypical Magnetic Anomaly Interpretation in Deep Prospecting of Handan-Xingtai Area,P631.2
  19. Research and Implementation of Formation Resistivity Measurement Based on Electromagnetic Wave Propagation Theory,P631.811
  20. The Application of Magnetic Prospecting in Hai Xing Plain, Hebei,P631.2
  21. A Research of the Underground Electromagnetic Field in Three-dimensional Inclined Geological Body,P631.325

CLC: > Astronomy,Earth Sciences > Geology > Geology, mineral prospecting and exploration > Geophysical exploration > Seismic exploration
© 2012 www.DissertationTopic.Net  Mobile