Dissertation > Excellent graduate degree dissertation topics show

Study on the Mode Switching Controlling of Full Hybrid Electric Vehicle Power Transmission System Based on CVT

Author: ShiBo
Tutor: LiuZhenJun
School: Chongqing University
Course: Vehicle Engineering
Keywords: Hybrid Electric Vehicle Mode Switching Torque Coordinated Control Moding and Simulation Bench Test
CLC: U463.2
Type: Master's thesis
Year: 2013
Downloads: 10
Quote: 0
Read: Download Dissertation

Abstract


The gradual deletion of oil resources and environmental pollution have become theglobal problems everyone have to face. For ever-increasing automobile amount andincreasingly stringent vehicle emission regulation, auto industry face a severe challenge,but also a unprecedented opportunity. Pure electric vehicles can not acquire substantialbreakthroughs on several key technical problems like how to have high-capacity andlong lifetime in a short time, fuel cell electrical vehicle also can not get greatdevelopment for some the limitations of its contemporary technology, so hybrid electricvehicle will continue to be the most potential vehicle.The research of the hybrid electric vehicle(HEV) has been paid more attention bycar manufacturers since the problem of energy and environment pollution, as well as theencouragement of the policy. However,many research institutes and manufacturersemphasized their study on the energy management strategy of the HEV, they seldompaid attention to the control strategy during the driving-mode-switch process. Manydriving mode can be achieved by the full hybrid electric vehicle. It is seldom that thedrive torque will be steady during the driving-mode-switch process since the responsetime of the engine and the motor to the torque requirement is different apparently. Thetorque surge would bring impacting to the drivetrain, influence the vehicle ride comfort.It is very necessary to study the control of the drive torque during thedriving-mode-switch process of the HEV.This paper studied the full hybrid electric vehicle with metal belt continuouslyvariable transmission. It is a parallel torque-coupling plug-in hybrid electric vehicle.The vehicle may face mode-switching processes in traveling, these process may havemany different state, such as starting the engine with ISG when traveling, stopping theengine, clutch engagement process, motor joining to work, ISG switching from motorstate to generator state, and so on. To have high mode-switching quality, all these stateneed to get related parts been reasonable controlled. In this paper, the following workswere done:①At first, this paper introduced thestructure and the system parameters of this fullhybrid electric vehicle, gave an analysis of the running modes and built a kineticmodel of this vehicle power transmission system.After having analyzed the dynamiccharacteristic of the components, it built the models of key components by Matlab/simulink soft, including an engine dynamic torque output model, a batterymodel, a CVT model, a motor dynamic torque output model, a clutch model and avehicle longitudinal dynamic model.②Then it recognized the needed torque of the full hybrid electric vehicle withCVT, divided the operation model region of vehicle，set the operating condition, targettorque of engine and motor and the speed ratio control strategy of CVT in each mode.③After setting mode switching condition, the paper analyzed the evaluationcriteria of the mode switching processes, designed the control strategy about the clutchengagement process, both the motor and engine when engine stopping and the motor,engine, clutch when car switched from ISG driving mode to engine driving mode. Italso set the coordinated torque control method and its ending condition of other modeswitching process.④When had built the control simulation model of the full hybrid electric vehiclebased on Matlab/Simulink/Stateflow, the paper specially simulated and analyzed thetypical mode-switching process, such as switching from ISG driving mode to enginedriving mode. Then the bench test of full hybrid electric vehicle power transmissionsystem was developed. The result of simulation and bench test both show the validity ofthe coordinated torque control strategy.

Related Dissertations

  1. Experimental Study on Combustion Characteristics and Load Expansion of Gasoline HCCI Engine Based on the OKP Technology,TK401
  2. Automotive electronic parking brake (EPB) control system design and implementation,U463.5
  3. Electronically Controlled Electricity Actustor Automatic Transmission Test-Bed,U467.52
  4. Modeling and Simulation of Micro-grid and Operating Characteristic Analysis,TM727
  5. Substation operation Management System,TM769
  6. Calibrition Experiment Research on the Electronic Control 4G94 D4 Type Gasoline Engine,TK403
  7. Research of Rail Pressure Contol Strategy for Multi-condition of High Pressure Common Rail System of Diesel,TK423
  8. Study on the Shift Schedule of Automatic Mechanical Transmission,U463.212
  9. Staged Frequency Control in Interconnected Power Systems,TM76
  10. Experimental Study on Fuel Injection System of Engine Fueled with DME/Diesel Blended Fuel,TK421
  11. Theoretical Analysis and Experimental Study of Differential Gear Train for Parallel Hybrid Electric Vehicle,TH112.3
  12. Study on Regenerative Braking and Friction Braking Integrated Control of HEV,U463.5
  13. Study on CVT Hybrid Electric Vehicle Regenerative Brake Control Strategy under Overall Braking Condition,U463.5
  14. OFDM adaptive modulation and coding technology research,TN919.3
  15. Research of Computer Measurement and Control System for Engine Test-bed Experiment,TP274
  16. Diesel Windows data acquisition and analysis system based research,TP274.2
  17. Bionic Pinch of Metering Device,S223.2
  18. A Study on Energy Distribution Control Strategy of a Serial Plug-in Hybrid Electric Vehicle,U469.72
  19. Research on Four-terminal Interia Test Bench and Test Norm for Vehicle Braking System,U463.5
  20. High-energy Ignition System for Electronic Lean Burn CNG Heavy-Duty Commercial Engine,U463.64
  21. Study on Parameter Matching Based on Vehicle Duty Cycle, Control Strategy and Simulation Software of Hybrid Electric Vehicle,U469.7

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Transmission
© 2012 www.DissertationTopic.Net  Mobile