Dissertation > Excellent graduate degree dissertation topics show

Electronic Power Steering Matching Design on a Mini-van

Author: Liu
Tutor: NieZuo; ChengAiGuo; LiaoHongHu
School: Hunan University
Course: Vehicle Engineering
Keywords: electronic power steering EPS mini-van matching design
CLC: U463.4
Type: Master's thesis
Year: 2012
Downloads: 87
Quote: 0
Read: Download Dissertation

Abstract


Compare to the conventional power steering system, Electrical power steering (EPS) takes the advantage of economic, convenient for installing and maintaining, good handle feeling in all situation.ect. There is no doubt that EPS will take the place of the conventional steering system. In our country there is a lot of cars adopt this kind of steering system. But it’s long time few people focus on the study of equipping the steering system on low-price car,such as mini-van.ect. Facing for the fierce competition marketing of China, manufactures need to improve their products to make sure that they won’t lose. Therefore, studying on how to apply this steering on the low-price car is a necessary request.In this article the writer introduces the history of the steering system, the structure of the EPS, its working principle and the development of electronic power steering system. focus on the dynamic model of electronic power steering system. figure out the working principle of the resistant steering torque. and what is discussed in this part will be a basic foundation for the further study. the matching design about the key hardware, including the ways how to chose the motor, reduction ratio and the torque sensor. Discussing the influence trend of some parameter. Using ADMAS/CAR build the mini-van model and test the accuracy of the model by some typical experiment.introduce some typical form of assistant curve, analysis the different among the different assistant curve, and chose the proper form to the matching design. compare to the fore-and-after change on steering system, make sure the matching is right.Aiming at find out the proper way of equipping the steering system on low-price cars in this article and providing the basic knowledge of practice and theory for the low-price car manufactures on equipping this steering system. The matching process is divided into two part, one part is focus on the hardware matching studying, and the other is manage to deal with the software matching. And in this way it will be very convenient for the relative engineer query.

Related Dissertations

  1. The Electric Power Steering System,U463.4
  2. Study on the Distribution of Organic Toxicity in Solid Phase of Acclimated Sludge in the Process of Treating BPA Wastewater,X703
  3. Research on Dewatering Performance of Sludge after Fenton Oxidation and Anaerobic Digestion,X703
  4. Performance Analysis of Raw Material of Lost Foam and Its Application Study on Ductile Iron Casting,TG249.5
  5. Experimental Research and 3D Modeling of EPS Cellular Concrete,TU528
  6. A Empirical Study on Cooperate Governance and Performance of Chinese Listed Companies of Universitiesand Colleges,G647;F224
  7. K-IFRS Implementation of the Impact Analysis of the Value Listed Companies,F224
  8. Optimization of Fermentation Process for Exo-polysaccharides Production by Kombucha ZJU1 and the Application of Fermentation Broth,TS275
  9. ATAD sludge reduction stabilization technology experimental study,X703
  10. Lightweight foam soil mixed flow regime Prevention Research Bump,U414
  11. Chassis Electronic Control Unit and System Integration Technology Based on BUS,U463.1
  12. The Research of Phenolic Resin Wastewter Treatment in Membrane Bioreactor with Polyester Nonwoven Fabrics,X703
  13. Empirical Research of the Behaviors and Methods of Earning Management on Unprofitable Listed Company,F224
  14. Research and Design of Vehicle EPS System,U463.4
  15. The Controller Design of Commercial Vehicle EPS Based on CAN Bus,U463.6
  16. Dynamic Characteristic and Hardware-in-loop Simulation Research for Automobile Electric Power Steering System,U463.4
  17. EPS Load Reduction Technology Application Research for High Fill Culvert,U449
  18. The Mechanic Properties and Impact Energy Absorption of Foam-made Loosefill Materials under Dynamic Load,TB484.3
  19. The Study of Unstable Changes of EPS Test Results in Ⅲa\Ⅲb Prostatitis Diagnosis,R697.3
  20. Study on the Influencing Factors of Membrane Fouling in a Submerged Membrane Bio-Reactor,X703
  21. A Study on the Surplus Sludge Treated by Autothermal Thermophilic Aerobic Digestion,X703

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Steering system
© 2012 www.DissertationTopic.Net  Mobile