Dissertation > Excellent graduate degree dissertation topics show

The Research of Anti-lock Braking System of Automobile Based on FPGA

Author: ZhouRongYan
Tutor: XuJin
School: Xi'an University of Engineering
Course: Control Engineering
Keywords: ABS anti-lock braking system FPGA Slip rate Logic control
CLC: U463.526
Type: Master's thesis
Year: 2011
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


Nowadays, the speed of the vehicle accelerates continuously with the developing of theautomobile industry, so the Requirement of the vehicle safe characteristics is higher thanbefore. Anti-lock braking system (ABS) is a kind of braking system to prevent a series ofnon-stabilizing factor such as sliding, deviation, loss of steering ability when the wheels arelocked in the braking process, thus it is used to avoid accident occur. The system can controlthe braking capacity effectively and maintain stability and steering the ability of direction, itis important for security driving.In this paper we put forward a improved design of the ABS system, which adopts theFPGA chip as ABS anti-lock system Electrical Control Unit (ECU), and the correspondingpart of the system hardware design is completed. In the forward path, the output wheel speedsignal from wheel speed sensor need pre-processing. In the A/D converter circuit converts thedigital signal sent to ECU for processing and computing. In the back path, the design of thesolenoid valve driving circuit is completed, which can convert the output signal from ECU todrive the solenoid valve, it also has a self-test function can real-time detect system failure andexcludes malfunction in time. In the part of software design, we adopt hardware descriptionlanguage Verilog to achieve. The main design contains two parts, the first part is thecalculation of the reference speed. In this system we first get the estimate of reference speedwith the maximum wheel speed method, and then create a reference speed of the Kalmanfiltering system state space model, using the adaptive method by the value of constantlyupdated to reflect the road conditions, which has been based on the reference speed adaptiveKalman filter algorithm to make the reference speed consistent with the vehicle speedapproximately. The second part is the logic threshold control design, in this system adoptcontrol strategy based on the slip rate is major and the wheel acceleration is supple. The basicprinciple is to choose the wheel acceleration threshold and slip ratio threshold control brakepressure booster, decompression or dwell so that the slip ratio can maintain optimum slipratio in the vicinity, resulting in better braking effect.In this paper makes simulation model in the Matlab/Simulink. At the same muzzlevelocity at different friction coefficient of the road on the braking simulation after set the appropriate simulated parameters, to gets the simulation curve of braking distance and thevehicle speed with wheel speed in the braking time under all kinds of road conditions. Theanalysis of the simulation results proves the system has good control effect.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  5. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  6. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  7. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  8. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  9. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  10. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  11. Development of Serial Bus Analyzer Based on Nios,TP274
  12. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  13. Temperature and pressure explosives temperature field memory test technology,TQ560.7
  14. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  15. Study on a New Method for Digital Transformer Protection Based on Wavelet Neural Network and FPGA,TM407
  16. Research PXI bus -based projectile speed module,TJ410.6
  17. Study on Hardware Implementation of Digital Controller Based on FPGA,TN791
  18. Design of Fuzzy PID Controller Based on FPGA,TP273.4
  19. Research of Speed-Sensorless Vector Control System of Coal Mine Hoister Based on MRAS,TP273
  20. FPGA-based motion control system design,TM341
  21. Research of Security Computer Board Testing System Based on Embedded System,TP306.2

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Braking system > Brake control device > Anti-lock brake
© 2012 www.DissertationTopic.Net  Mobile