Dissertation > Excellent graduate degree dissertation topics show

Welding Technology and Mechanical Structure of Automatic Welding for Aluminum Radiator Head

Author: ZhangWeiWei
Tutor: ZhouHaoBin
School: Xi'an University of Petroleum
Course: Materials Science
Keywords: aluminum radiator head automatical welding mechanical structure welding procedure
CLC: U464.138.2
Type: Master's thesis
Year: 2011
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


Aluminum radiator is an indispensable and important component in the cooling system of the automatic liquid-cooled engines. With the improvement of aluminum radiator towards high-density, low weight, high pressure and corrosion direction, welding quality of aluminum radiator head is claimed higher requirements. Currently, welding for aluminum radiator head usually adopts the tungsten-arc-welding method that requires manual argon while wire is fed manually. Welding quality totally depends on proficiency of welder and it doesn’t satisfy the demands of automatic welding processing for high quality, high efficiency and large-volume radiator products.By comparison and analysis of pre-selection schemes, mechanical system is designed, which is constituted by direction X and Y moving mechanism of welding pistol, positioning and clamping device of radiator,rolling mechanism, adjusting device of welding pistol, and etc. It is equipped with (C8051F020) control system of monolithic integrated circuits and design of completing low-cost, automatically aluminum-radiator welding. On the basis of this, welding tests are practiced which adopt TIG welding cap that isn’t fed with wires. Results demonstrate that no-fed TIG causes defects such as incomplete penetration, lack of fusion, pores and cracks. After analyzing causes, initially tests are organized by using no-fed A-TIG. By testing gas leakage of welding seam. And by analyzing appearance of seam and seam-root-layer, it is determined that no-fed A-TIG can weld aluminum-radiator cap. At the same time, by matching and testing different parameters, optimized parameters of craftwork is acquired in the process of no-fed A-TIG welding.In optimized parameters, the welding line is straight, burnished, and well-formed in appearance. Chemical composition of the weld mental is not distinctly different from the base mental. Welding compactness is fine. Synthesizing the experimental results, we can draw the conclusion that no-fed A-TIG welding can complete auto-welding process in optimized parameters and satisfy the combination property of aluminum radiator head by the welding equipment.

Related Dissertations

  1. The Development of Automatic Hydraulic Extrusion System for PTFE Lining,TQ320.5
  2. Research on Guide Bar Shogging of High Speed Warp Knitting Machine Based on Rotation Moter Control,TS184.3
  3. The Mechanism Design and Kinematic Simulation of Interventional Surgery Robot,TP242
  4. Mechanical Property Prediction for Welded Joints of Low-Alloy High-Strength Steel and Welding Procedure Management,TG407
  5. The Seat Robot Design and Simulation with Computer,TP242
  6. System Design and Control of Theautomatic Stock-taking Robot,TP242.6
  7. Research on Design and Operation Simulation of Surgical Instrument for Celiac Minimally Invasive Surgical Robot,TP242.3
  8. Design and Implementation of the End Actuating Mechanism for a Celical Surgical Robot,TP242.3
  9. Research for IC Chip Auto Laser Marking Equipment,TN249
  10. The Research on Measurement and Control System of Automatic Camshaft Measuring Instrument,TP273
  11. The Study on High Precision Wheel-Rail Profilometers,TG80
  12. Research of Pipeline Welding Robot on Heterotypic Cross Section,TP242
  13. Vibration Noise Simulation and Control Technology Research of Mechanical Structure,TB535
  14. Detection and Analysis on Cracks and Property Deterioration of the 16MnR Welded Joints Caused by Copper Infiltrating into the Weld,TG441.7
  15. Mechanism Design and Kinematic Simulation of a Celiac Invasive Surgical Robot,TP242.3
  16. Research into C Company About Products Quality Improvement According to ASME Code,F273.2
  17. A Double Path Laser Interferometric Length Measuring Instrument and Its Application in 3D Coordinate Measuring Machines,TH721
  18. Effects of Welding Procedure on the Microstructure and Properties of Welded Joint of Cryogenic Steel SA516Gr.60,TG407
  19. Application and Research on Topology Optimization Methods of Continuum Structures,O342
  20. Method and Application Research on Dynamic Topology Optimization of Automobile & Mechancial Structures,U461
  21. Research on the Mechanical Structures of CPT System on Seabed of Shallow Ocean Area,P716

CLC: > Transportation > Road transport > Automotive Engineering > Automotive engine > Reciprocating engine > Components, parts > Cooling system > Radiator
© 2012 www.DissertationTopic.Net  Mobile