Dissertation > Excellent graduate degree dissertation topics show

Research of Water Jacket’s Velocity and Pressure Field under the Influence of Water Hole Distribution

Author: LiuWei
Tutor: HuYuMei; LiFeiYang
School: Chongqing University
Course: Vehicle Engineering
Keywords: engine water jacket water hole distribution CFD
CLC: U464.138
Type: Master's thesis
Year: 2013
Downloads: 6
Quote: 0
Read: Download Dissertation

Abstract


Reducing overheat problem due to the engine long time work effectively is veryimportant, reasonable designed water jacket not only enhance the working performance,and also prolong the product working lifetime by equalize the coolant water. However,the gasket in water jacket is the central part of the factor which effect the velocity,pressure and temperature field. Presently, few researches on influence of water holesdistributions to coolant-flow distribution are conducted, investigators mainly pay theirattentions to several kinds of water jacket CAE analysis and structure optimizationspecially. In order to study how the water jacket gasket’s water hole distributioninfluence the coolant water distribution in water jacket, the paper focus on a waterjacket study and hope to offer some conclusion for future water jacket design andoptimization. The main contains are proposed below:1) On the foundation of CFD control equations, the paper mentioned the basicmethod and steps of water jacket CFD analysis. What’s more, the paper introduce liquidphysical attributes, water movement mode and wall conditions in detail, and finallycurtained the main parameters related to CFD pre-conduction2) based on the relevant research, the paper simplified a kind of water jacketstructure and set up the CAE pre-calculate model, find the reason of negativecoolant-flow distribution by evaluating coolant-flow velocity field and press velocity.3) the paper offered8plans of water holes distributions which transferred fromsimple plan to correspondingly complex and mature plan, contrast and judge each plansunder certain special criterion, figure out the best plans considering velocity andpressure field.4) on the foundation of how different water holes distribution plans influence thecoolant-flow distribution, the paper conclude the relationships of water holedistributions and coolant-flow distribution, which may offer some reference for futureengine water jacket structure design and optimization.

Related Dissertations

  1. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  2. Physically Based Real-Time Fluid Simulation Technique,TP391.41
  3. Digital Simulation of Temperature in Modern Greenhouse,S625.51
  4. Study on the Characteristics and Simulation of the Hydrocyclone Reparation Process for Initial Rainwater,X522
  5. Large range of water cannons Design and Research,TU998.13
  6. Study on Bubble Behaviors in Anode Channel of a Passive Direct Methanol Fuel Cell,TM911.4
  7. Design and Simulation of a tobacco flavoring feeding machine,TS43
  8. Based on Pro/E Reconstruct Sprinkler Structure and Investigations on Internal Flow Characteristic of the Sprinkler by Numerical Simulation and Experiment Methods,TP391.72
  9. An Analysis on Energy Consumption of Large Spaces Air Condition System in Different Air Distribution,TU831
  10. Numerical Simulation of Flow and Mass Transfer in Tubular Electrochemical Reactor for Organic Wastewater Treatment,X703
  11. Numeration Simulation of the Flow Field in a Slurry Pump,TH311
  12. Research on Oil-Mist Flow Field’ Simulating and Lubrication Effects of the Bearing’s Cavity of Upper Back Up Roll,TH117.2
  13. An Investigation of the Frictional Pressure Drop of Air-Water Two-Phase Flow in Vertical Helicoidal Coiled Tube,TK172
  14. Numerical Simulation and Optimal Design of Longitudinal Roadheader’s External Spray,TD714.4
  15. Simulation & Experiment Research on Temperature Field of the Air-condition Cab of Wheel Loader,TH243
  16. Study of the Inner Flow of Vortex Stage and the Vibrancy of Rotor System in High Vacuum Dry Pump,TH314
  17. Study of the Numerical Simulation Platform and Experiment of Welding Fume Control and Displacement Ventilation in Large Integral Industrial Workshop,TU834
  18. CFD Simulation on Two-phase Flow Field of Combined Directed Floating Valve Trays,TQ053.5
  19. Removal of Organics from Printing and Dyeing Wastewater Using Fly Ash as Adsorbent by Hydrocyclone,X791
  20. Research and Application of Caprolactam-containing Wastewater Recovery with Centrifugal Extraction Technology,X78
  21. Predict and Study on the Aerodynamic Noise of Semi-open Axial Fan of Air Conditioner Outdoor Unit,TH432.1

CLC: > Transportation > Road transport > Automotive Engineering > Automotive engine > Reciprocating engine > Components, parts > Cooling system
© 2012 www.DissertationTopic.Net  Mobile