Dissertation > Excellent graduate degree dissertation topics show

The Research on Several Key Technologies of Electric Vehicles Crash Safety

Author: JiangZhaoJuan
Tutor: HuPing; ZuoChang
School: Dalian University of Technology
Course: Vehicle Engineering
Keywords: Electric Vehicles Crash Safety Front Crash Sled Test
CLC: U467.14
Type: Master's thesis
Year: 2012
Downloads: 411
Quote: 0
Read: Download Dissertation

Abstract


With the promotion and use of electric vehicles, the security issues of electric vehicles become the attention focus inside and outside the industry. Compared to traditional fuel vehicles, electric vehicles have its own particularity in crash safety. Heavier than traditional cars, for the battery power system, when EVs’crash happens people maybe get more injure. So it is significant to study EVs’crash security for developing and popularizing electric vehicles.Crash safety of two types of electric vehicles is studied in this paper. Firstly, the electric vehicle modified from traditional fuel vehicles is studied. By analyzing front crash simulation results, both its battery acceleration and firewall intrusion exceed the secure range. Then the optimal design scheme is reached by five rounds’optimization and design. Crash safety of the first type electric car can be improved significantly by adding triangular structure between the bumper and battery and applying hot forming material to longitudinal frame instead of ordinary steel.Secondly, the second type electric vehicle specifically designed for electric driving is researched. The EV’s simulation and test results match well in Full Front Barrier (FFB) test and Offset Deformable Barrier (ODB) crash. It’s shown both EV’s acceleration and intrusions of steering column and pedal groups meet the design requirements. Also, the key energy-absorbing components are deformed reasonably and the battery deformation is very small for not being hit directly. However, the bumper and crash can are torn, which occurred in non-collision side in ODB. For that, the sled test subsystem is designed. And the sled model is built based on EV’s model. Then the sled test is conducted, and the effective correlation of the EV and sled is verified through analyzing the EV crash and the sled test results. As a result, the sled test provides a method for optimizing the bumper structure efficiently with low cost.Simultaneously the potential risks in FFB and ODB crash for front cabin high-voltage lines are analyzed. And then two solution schemes are put forward to avoid such high-voltage lines’problems as leakage, short circuit and other hazardous phenomena in the EV crash.

Related Dissertations

  1. Economic Effects of Fiscal and Taxation Policies to Hybrid Electric Vehicles in China,F812.0
  2. Dynamical System Design and Experimental Study of the Electric Bus,U469.72
  3. Powertrain System Design and Vehicle Performance Simulation of Electric Vehicle,U469.72
  4. On Drive and Control Method of Permanent Magnet Synchronous Motor Used in Electric Vehicles,TM341
  5. Simulation and Analysis of the Bumper for the Safety of Pedestrian Leg Impact,U467.14
  6. Analysis of Collision Tests and Research on the Structural Crashworthiness of Bodywork,U467.14
  7. Research on Braking Control Strategy of Electric Vehicle,U463.5
  8. Research and Implement of Regenerative Braking and Driving System Based on Pure Electric Vehicles,U469.72
  9. Vehicle Collision Accidents Reconstruction and Security Evaluation,U491.31
  10. The Design and Implement of Electronic Vehicle Business Operation Support System Based on J2EE,TP311.52
  11. Research of Technical Management of Electric Vehicle Industry Basing on the SNM Perspective,F426.471
  12. Modeling and Simulation Analysis of Micro-electric Car,U469.72
  13. Simulation Research on Power-train System and Parameter Matching of Micro-electric Vehicle,U469.72
  14. Research on the Key Factors Impacting on the Development of Electric Vehicle Industry in China,F426.471
  15. Study on a High Performance Bi-directional DC/DC Converter in Electric Vehicle,TM46
  16. Prediction on EV Development in Beijing and Solutions for Grid Company,U469.72
  17. Research on the Controller of Four in-wheel Driven Electric Vehicles,U469.72
  18. Research on Based on STM32 Exchange of Asynchronous Controuers for Electric Vehicle,U469.72
  19. Research on the Control Principle of Series Excited DC Motor of Electric Car,U469.72
  20. Pure Electric Car Bearing Mechanical Properties Study Based on MC6320A(KK) Automotive Platform,U469.72
  21. Configuration Analysis and Research on the Shift Schedule for the Hybrid Electric Saloon Car Equipped with DCT,U469.72

CLC: > Transportation > Road transport > Automotive Engineering > Vehicle test > Vehicle test > Safety, collision and destruction test
© 2012 www.DissertationTopic.Net  Mobile