Dissertation > Excellent graduate degree dissertation topics show

Research on VCU for Pure Electric Vehicle

Author: GeQingGuang
Tutor: KongHuiFang
School: Hefei University of Technology
Course: Control Theory and Control Engineering
Keywords: Vehicle Control Unit Fuzzy control Control of braking energyrecovery Advisor
CLC: U469.72
Type: Master's thesis
Year: 2012
Downloads: 230
Quote: 0
Read: Download Dissertation

Abstract


As a kind of new energy vehicles, Pure Electric Vehicles (PEV) have gooddevelopment prospect. VCU (Vehicle Control Unit) is one of key technologies for PEVresearch. High efficient and reliable energy management strategy can effectively take use ofLithium battery’ energy to improve the trip range mileage. This paper is to study therecovery strategy of braking energy and complete the design of VCU on the basis of studyboth home and abroad.Firstly, the history and development of PEV are introduced in this paper. Then keytechnologies for the PEV are introduced, including VCU, lithium battery technology,energy management system (EMS), motor drive technology, etc.The research of VCU is one of the key technologies for the study of PEV which playsan important role in the control of the vehicle and the energy optimization. The compositionand working principle of VCU are studied, function analysis are also given in this paper.Recycling of braking energy is one of main functions of VCU. The distribution ofbraking force between mechanical braking and electrical braking is a puzzle. Based on thestudy of the existing braking energy recovery control strategy, a reasonable braking energyrecovery control strategy is put forward.After analyzing the research of the VCU both home and abroad, the composition andprinciple of VCU are studied and the total design project is proposed. A vehiclecommunication network based on CAN bus is put forward.A fuzzy controller is designed.The speed and SOC are set for inputs while theregenerative braking scaling factor is set for output. Membership functions and fuzzy rulesare designed using MATLAB fuzzy logic toolbox. Control strategy for braking energyrecovery is simulated in Advisor software.The design of the hardware for VCU is made according to the idea of modulardesign. Meanwhile the ground and application software are completed. Someanti-interference measures are adopted to ensure the reliability of VCU. At last,basic functions of VCU are verified by the designed experiment.

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  4. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  5. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  6. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  7. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  8. Study on Optimization of Urban Traffic Signal Herarchical Control Based on Fuel Cost,U491.51
  9. Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
  10. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  11. Research on Automatic Control System of Hump Push Peak Speed Based on Fuzzy Neural Network,U284.6
  12. The Expert Advisor of Exchange Rate Forecasting Based on BP Neural Network,F830.92
  13. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  14. The Research of Fuzzy Adaptive Soft Start Control on AC Asynchronous Motor,TM343
  15. Control Scheme of Switched Reluctance Generator Used in Wind Power System,TM352
  16. Based on the "Five Zones" Fuzzy Control for Substation Voltage and Reactive Power,TM761.1
  17. Obstacle Avoidance of Mobile Robot Based on Multi-sensor,TP242
  18. The Simulation Perfermence and Analysis for Election Control Hydraulic Litmitedslip Differential of Loader Based on Fuzzy Control,TH243
  19. The Research of Intelligent Car Path Planning Based on the Genetic Algorithm,TP242
  20. Research of Energy Saving Control System of Pumping Unit Based on Fuzzy Control with Self-tuning of Scaling Factor,TE933.1
  21. Research of Thin Slab Continuous Casting Mould Level Control System in BX Steel Corporation,TF341.6

CLC: > Transportation > Road transport > Automotive Engineering > A variety of automotive > Various energy vehicles > Electric vehicles
© 2012 www.DissertationTopic.Net  Mobile