Dissertation > Excellent graduate degree dissertation topics show

Structural Analysis of Multione and Research on Work Device Leveling System

Author: WangChuangBo
Tutor: LiuJinJun; GaoYingJie
School: Yanshan University
Course: Mechanical and Electronic Engineering
Keywords: Multione ADAMS electro-hydraulic leveling fuzzy PID
CLC: U469.6
Type: Master's thesis
Year: 2013
Downloads: 1
Quote: 0
Read: Download Dissertation

Abstract


Multione is a small multi-function machine, and widely used in small-scaleearthworks. It is a kind of typical working condition of variable load mechatronicsproducts. Its telescopic boom structure enlarges the scope of work, make the workingdevice unusual flexible. Its quick change kit on the attachment plate can install with avariety of accessories, to adapt to different job situations, but followed it is for thestrict requirements in the attachment plate automatic leveling control.The paper based on the prototype of a certain type of Multione, establishes the3dmodel diagram, and analyzes its main function according to the relevant performanceparameters. First using ADAMS to analyses work device of Multione under loading andloading condition about the kinematics and dynamics, analyses the work transmissionangle, loading height, and unload distance under the loading height such as overallperformance parameters and the stress state of each hydraulic cylinder under loading andunloading conditions. In addition, on the basis of the existing Multione innovate anddesign attachment plate automatic leveling system in order to make accessories platesremain the same position with ground when the movable arm shift, the system improve thework efficiency and enlarge the using range of the installation accessories. This paperpresents the electro-hydraulic leveling control system, which uses the proportional control.The system uses a proportional valve controlling the hydraulic cylinder, by installingsensors on the movable arm and accessories plate, the control signal of the proportionalvalve can be determined by comparing the difference between the movable arm inputsignal and accessories plates output signal, the proportional valve can control thecylinder’s action, by this way, the leveling system can implement the plate’s operation onleveling. Final, by PID and fuzzy PID control simulation and relevant experiments havebeen carried out to verify the leveling system.Simulation results show that, the designed electro-hydraulic leveling control systemcan satisfy the attachment plate leveling when the movable arm changes angle85°within 4.2s, that’s mean the system can achieve stable within0.3s, and it can meet therequirements of attachment plate leveling.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  3. Research on Temperature Control System for Laser Diode,TP273
  4. Design and Study of Temperature Chamber Control System in Servo Table,TP273
  5. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  6. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  7. Design and Research of the Mine Monorail Brake System,TD524
  8. Gatling machine gun in a modeling and simulation analysis,TJ24
  9. Humaniod Robot Development and Research,TP242
  10. Virtual Prototype Realizing and Performance Research of Longitudinal Roadheader,TD421.5
  11. Research and Simulation on Vehicle’s 4 Wheel Drive System,U464
  12. The Imitate True Analysis and Betterment Design of Bulldozer Operate Device by Pro/E and ADAMS,TU623.5
  13. Optimum Design and Simulation Analysis of Hydraulic Excavator Working Devices and Establishment of the Hydraulic System Model,TU621
  14. A strong dynamic load mechanical holder dynamics simulation and finite element analysis,TJ03
  15. Handling and stability based on multi-axis turning special vehicles,U461.6
  16. Design Control Algorithm of A Dynamic Positioning System for the Large Trailing Suction Hopper Dredger,U674.31
  17. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  18. Design of Fuzzy PID Controller Based on FPGA,TP273.4
  19. The Design Research and Control Realization of One Kind of 4-DOF SCARA Robot,TP242
  20. Research on Modification and Application of Particle Swarm Optimization Algorithm Based on Control Methods,TP301.6
  21. Application of PID Control in Networked Control System,TP273

CLC: > Transportation > Road transport > Automotive Engineering > A variety of automotive > Special Purpose Vehicle
© 2012 www.DissertationTopic.Net  Mobile