Dissertation > Excellent graduate degree dissertation topics show

The Design of Embedded Fin Stabilizer and Optimization of Variable Parameters Controller

Author: WangAnMin
Tutor: ZhaoJiJun
School: Harbin Institute of Technology
Course: Mechanical Engineering
Keywords: fin stabilizer parameter optimization genetic algorithm variableparameter controller
CLC: U664.72
Type: Master's thesis
Year: 2013
Downloads: 3
Quote: 0
Read: Download Dissertation

Abstract


All the ships will sway when they are sailing on the sea. The excessive lateral swayhas most influenced the stability. It will affect the safety of products on the ship andreduce the ships’ comfort and diminish some efficiency of the equipment. The directionof the sailing ship will be affected too. So it is important to reduce the excessive lateralsway. Fin stabilizer is one of the equipments in common use. According to theparameters of some ship, the fin stabilizer with embedded fin is designed to reduce thesize of the fin box in the hull. Then the work is done including fulfilling the kinematicsimulation of the fin stabilizer, establishing the model of the fin control system,optimizing the parameters of the controller and researching the simulation of the fincontrol system.Fin stabilizer includes non-retractable fin stabilizer and retractable fin stabilizer.The dimension of the non-retractable ones is limited by ship structure size. Theretractable ones can be taken back in the body of vessel when the fins don’t work.Although it diverts the defect of the non-retractable fin stabilizer, it increases the fin boxin the bull which influences the velocity of ship. To reduce the effect, designing theembedded fin that the small fin can retracts in the big fin is aimed at lessening thedimension of the box. Fin stabilizer includes rotating fin mechanism, retractable finmechanism, embedded fin and fixed mechanism. Besides, the whole fin device isinstalled to simulate the working process of fin. The result shows fin stabilizermechanism meets the requirements accurately.According to the linear rolling motion theory, the ship model is established. Itincludes angular rate gyroscope, amplifier, PID controller, ship speed compensator andwave scale controller, servo system with the electro-hydraulic position feedback. Thewhole control system is accomplished using the parts mentioned above. It will be usedfor optimizing the parameters.In order to increase the property of the control system and reduce the rollingangular of ship, the three parameters of PID controller are optimized through classicgenetic algorithm (abbreviated GA) and new-style GA. Under the invariant seacondition, the control system is simulated using the two groups of the parameters. Fromthe result, new-type GA is better than classic GA and the values by new-style GA arecloser to the truth-values. In addition to this, the controller is applied variableparameters so that the controller is affected not only the initial parameters but also theerror. Under the variant sea condition, the control system is simulated using fixedparameter controller and variable parameter one. In comparison, the system with thevariable parameter controller is slightly better than the fixed parameter one, which explains the variable parameter controller making the system improve its performanceslightly.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. The Application of Fuzzy Comprehensive Evaluation Based on Genetic Algorithm in Vocational Evaluation of Classroom Teaching,G712
  3. Study on Taste Characteristic of Taste Peptide Enzymatic Production from Oyster Base on A Neural Network Method,TS254.4
  4. Hot air drying characteristics of lettuce osmotic dehydration mass transfer kinetics and permeability,TS255.52
  5. Design and Realization of the Magnetic Antenna in MW and SW Bands Based on Genetic Algorithm,TN820
  6. Citrus Image Segmentation Based on Genetic Algorithm,TP391.41
  7. Research of Scheduling Algorithm Based on Hybrid Adaptive Genetic Algorithm in Computing Grid,TP393.09
  8. Research on Clustering Algorithm Based on Genetic Algorithm and Rough Set Theory,TP18
  9. Mining resources based on genetic algorithm optimization model of,O224
  10. Study on the Optimization of Deep Stope Support Parameters and Mining Sequence of Xingcheng Gold Mine,TD35
  11. Study on Optimization of Urban Traffic Signal Herarchical Control Based on Fuel Cost,U491.51
  12. Optimum Research on Runner System in Bi-color Injection Mold Based on Genetic Algorithm and Moldflow,TQ320.52
  13. Study on Optimization of Energy Structure and Countermeasures of New Energy Development During "The Twelfth Five-Year Plan",F206;F224
  14. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  15. Optimization Study on Gating System and Molding Process Parameters of Injection Mold Based on Simulation,TQ320.662
  16. Design and Realization of Automatic Course Arrangement System Based on Genetic Algorithm,TP311.52
  17. Configuration Synthesize and Optimizing of Reconfigurable Modular Robots,TP242
  18. Study of Electromagnetic Tomography Image Reconstruction Based on Finite Element and Genetic Algorithm,TM15
  19. Study on Fuzzy Logic-based License Plate Recognize System,TP391.41
  20. Research on Multi-dimention and Multi-degree Dynamic Absorption,O328
  21. Theoretical Analysis and Optimization of Transplanting Mechanism with Deformable Elliptical Gears Transmission,S223.91

CLC: > Transportation > Waterway transport > Marine Engineering > Ship machinery > Ship anti- roll device > Fin Stabilizer ( Stabilizer )
© 2012 www.DissertationTopic.Net  Mobile