Dissertation > Excellent graduate degree dissertation topics show

Experimental Research on Fire Resisitence Performance for R. C Columns under Eccentric Loading with Damages Caused by Service Loads

Author: FanLong
Tutor: MiaoJiJun
School: Qingdao Technological University
Course: Structural Engineering
Keywords: eccentric compression column using damage fire test temperaturefield bearing capacity calculation
CLC: TU375.3
Type: Master's thesis
Year: 2011
Downloads: 23
Quote: 1
Read: Download Dissertation

Abstract


Since reinforced concrete structures and members are destroyed seriously and even collapse in fire.pecople put more and more attention to the behaviors of reinforced concrete structure and members under elevated temperature. Considerable experimental research and theoretical analysis are in progression, for example, materials strength and elastic modulus of reinforcement and concrete and bond strength between reinforcement and concrete deteriorate significantly. Systematic analysis and conclusions are made; meanwhile other studies in this thesis were included as following:(1) The concrete structural performance and influencal factors under fire were analyzed with material and member;(2) Thermal and mechanical properties of concrete and reinforced bar were reviewed comprehensively, besides, achievements and shortcomings were comprehensively analyzed as well.(3) Five R.C. eccentric compression columns were designed to simulate the developing of cracks at serviceability limit states which was index of initial damage for fire resistance performance.(4) Fire behaviors of the initial damage of the R.C. eccentric compression columns were studied. The final destruction of the eccentric compression column, distribution of cross-section temperature field and axial deformation were observed, the law of distribution of temperature impacted by initial damage was drawn.(5) According to the measured cross-section temperature, cross-section bearing capacity of five eccentric compression columns at high-temperature was theoretically analyzed. Against to degeneration on mechanical performance of materials and reductionon section dimension of R.C. column post-fire, primarily discussion was carried out on the calculation method of residual bearing capacity, which was named equivalent corss-setion economization.

Related Dissertations

  1. Analysis and Experimental Study of steel staggered truss structure under lateral force resisting response to fire,TU391
  2. Mechanical Property Study of Open Spandrel Bonded Prestressed Steel Reinforced Concrete Beam,TU398.9
  3. Behaviors and Analysis of High-strength Concrete Columns Confined by CFRP Sheets under Sustained Eccentric Compression,TU375.3
  4. Practical Investigation of Columns Strengthened with FRP under Little Eccentric Loading,TU375.3
  5. Surface mounted CFRP plate reinforced concrete beam flexural capacity of,TU375.1
  6. Experimental Study on the Temperature Field and the Thermal Deformation of the Continuous Beam and Frame Piers Bridge on the Jinqin High-speed Railway,U443.22
  7. Study of Axial Bearing Properties of Cast-In-Situ Pile in Xigeda-Rock,TU473.11
  8. Analysis on Bearing Capacity of Corroded Reinforcement Members in Bending,TU375
  9. Research on Calculation Methods of Bending Resistance Bearing Capability of Reinforced Concrete Beams in Service,TU375.1
  10. Study of the Calculating Method of Crack Resistance and Flexural Capacity for Rectangular Reinforced RPC Beam,TU311.4
  11. Experimental Study on the Behaviors of Full-scale Two-way Reinforced Concrete Fixed Supported Slabs and Vibration Analysis under Fire,TU317
  12. Digital Holographic Interferometry(DHI)Used in the Measurement of Temperature Field,O438.1
  13. Thermal Characteristics Analysis and Structure Optimal Design of the RAM System of Tk6920Cnc Boring and Milling Machine,TG536
  14. Numerical Simulation of Resistance Spot Welding for Magnesium Alloy,TG453.9
  15. Research on Ablation Properties of Carbon/carbon Composites for SRM Throat,TB332
  16. Process Simulation and Hierarchical Polymer Blend Part Structure in Water-assisted Injection Molding,TQ320.662
  17. Study on Preheating Storage Layer Structure Influence on the Temperature Field and Flow Field in the Super Wide-Body Roller Kiln,TQ174.653.4
  18. No Doubles as a Flange Fixed Tube Sheet Heat Exchanger Mechanical Behavior Study,TQ051.5
  19. Characterization of Wedged Samples Using Laser Induced Photothermal Radiometry,TN247
  20. Behavior and Design of Composite Beam in Fire with Considering Global Structure Effect,TU398

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures > Column
© 2012 www.DissertationTopic.Net  Mobile