Dissertation > Excellent graduate degree dissertation topics show

Research on Fault Diagnosis of the Gas Engine Cylinder and Its Application

Author: WangWeiZuo
Tutor: JiangZhiNong
School: Beijing University of Chemical Technology
Course: Chemical Process Equipment
Keywords: gas engine vibration signals instantaneous angular speed fault diagnosis layout optimization of sensor
CLC: TK438
Type: Master's thesis
Year: 2013
Downloads: 5
Quote: 0
Read: Download Dissertation

Abstract


As one kind of diesel engine, the gas engine plays an important role in the professions of petroleum, chemical industry, shipping, vehicle and aerospace. It provides power for them and its operating period and status are closely related to the reliability of the system and the efficiency of enterprises. If there is a safety incident of gas engine, it will bring significant impacts on many aspects. With the development of the centrifugal engine, people started to pay more attention on reciprocating engines. Because of this, further development of engine fault diagnosis is particularly necessary. At the present, the main methods for diagnosis of engine include vibration monitoring, liquid analysis, state parameters monitoring, instantaneous angular speed monitoring and intelligent methods. The vibration monitoring and instantaneous angular speed monitoring are widely applied.The vibration signals are one of the common signals in diagnose faults because the signals contain a wealth of information. In this paper, we monitor the vibration signals of a four-stroke-eight-cylinder engine and add the signals together in angular domain. Then we make the igniting order and the crank angle correspond. So we can know the fault cylinder number from the crank angle directly and early warning of misfire fault is achieved. On the other hand, owing to the number of sensors cutting down, the input costs are reduced obviously.The instantaneous angular speed signals are also one of the common signals in diagnose faults because the signals are rich with information and easy to measure. In this article, we use the relationship between cylinder pressure and instantaneous angular speed to simulate the wave chart of instantaneous angular speed, juxtapose the normal wave with the faulty wave and use the characteristic parameters to diagnose the misfire fault. At the same time, we use BP neural network to realize the early warning.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. The overall design and system development RTAD-CMDMDES of,U279.3
  3. The Method of Transient Modeling and Parameter Identification and Its Application in Rotating Machine Fault Diagnosis,TH165.3
  4. Research on Technology and Application of Hand-held Low-frequency Vibration Signals Acquisition System,TP274.2
  5. Fault Diagnosis Method and Application Based on Observer,TP212
  6. The Siulation Optimization and Performance Improvement of Gas Engine,TK43
  7. Engine and control system design is based on virtual instruments and CAN bus,U463.6
  8. Study and Utilization of Digitalized Monitoring System for Passenger Aerial Ropeway,TH235
  9. Fiber-based temperature measurement of a device fault diagnosis and research,TH811
  10. Sound signal analysis method overloaded freight train rolling bearing fault diagnosis,TH165.3
  11. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  12. The Study and Design of Fault Diagnosis System Based on Condition Monitoring for 27 Meters Mobile Aerial Working Platform of Straight Arm,TH165.3
  13. Rearch on Fault Diagnosis Expert System of Tactical Network Communication and Equipment,TP182
  14. Study on the Straddle-type Monorail Cast Steel Pedestal Health Status Detection Based on Vibration Test Technology,U232
  15. Research and design of electric power locomotive electrical system fault diagnosis expert system,U269.6
  16. The improved intelligent algorithm - based electric locomotive traction transformer fault diagnosis technology research,U269.6
  17. The overloaded train bearing failure audio signal integrated diagnostic program research,U279
  18. The Application Research of Data Mining to Shield Fault Diagnosis,TP311.13
  19. Remote Diagnostic & Monitoring System Design and Development for Testing Prototype Vehicles,U472.9
  20. Research on Fault Diagonisis System of Ship Generator Rotor,U672
  21. Diagnosis of Vibration Fault of Waste Heat Stream Turbine Based on Hierarchical Classification,TM311

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Gas fueled internal combustion engines > Repair and maintenance
© 2012 www.DissertationTopic.Net  Mobile