Dissertation > Excellent graduate degree dissertation topics show

Study in the Stress-Cone of HTS Cable Terminals

Author: SunQiuShuang
Tutor: ZhangHuiZuo
School: North China Electric Power University
Course: Theory and New
Keywords: termination superconducting cable stress cone finite element method
CLC: TM249.7
Type: Master's thesis
Year: 2012
Downloads: 107
Quote: 0
Read: Download Dissertation

Abstract


Taking high temperature superconductors (HTS) as the conductors have many advantages such as small size, light weight, low loss, without a fire hazard and so on. Termination is one of the most important parts in the superconductor cable system. Especially the distribution of electric field at the end of the cable, the heat leakage of the current leads and the structure of the termination cryostat are the key technique for optimizing the termination design.This paper introduces the design of a220kV/3kA superconductor termination. The important parameter of stress cone will be given here by theoretical calculation. The electrical field in the stress-cone of power cable terminal is analyzed by finite element method (FEM). Stimulated results are realized by adjusting the length and curvature of the stress cone of this termination, respectively. Compared with the conventional method, the method can accurately calculate the terminal electric field distribution and optimize the design of the stress cone.This paper describes the characteristics of stress cone of HTS cables with different structures and analyses different electrical properties of common semiconductor materials in room temperature and low temperature environment. By the pressure test, lightning breakdown test and other job, the electrical properties of semiconductors in low temperature are researched deeply, and then t he electrical parameters of materials in room temperature and low temperature environment be gotton. The finally design scheme is that using Polypropylene laminated paper (PPLP) as the insulation material for main insulation layers and carbon paper as semiconductor materials for stress cone in HTS cable. After a miniature version of stress cone of HTS cables with35kV is constructed which replace bellows with stainless steel tube, high pressure test is performed. It is found the gap between application in practical engineering and simulation design. The paper analyzes the defective stress cone to seek improving methods and find relevant problems that will impact the design. It aims to have a better design by experiments. The results show that the new model accords with the expecting demand better and may provide an important reference to make an actual HTS cable.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  4. The Influence of Lung Volume Changes on Sleep Apnea,R766
  5. Study of Modal Characteristics of a Car Body-in-White,U463.82
  6. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  7. Sensitivity Analysis on Fatigue Reliability of a Turbine Disk Using Finite Element Method,V232.3
  8. Research narrower than the opening Kita highly optimized root,TU347
  9. Strength Analysis and Parameter Optimization of Single Channel Drum Dryer,TK173
  10. A Related Clinical Study of Transient Ischemic Attack Developing into Cerebral Infarction,R743.3
  11. Principle and Experiment Research of Road Simulation Test Stand for Vehicle Parts,U467.3
  12. The Fatigue Life Study of a Car Body Based on the Random Vibration,U463.82
  13. Research on Car Frontal Impact Simulation and Crashworthiness Analysis,U467.14
  14. The Lumped Mass Finite Element Method for Second Order Hyperbolic Equtions,O241.82
  15. Simulation Research on Spontaneous Combustion Law of Residual Coal in Goaf,TD752.2
  16. Analysis of the Influence of Water-Soil Coupling Interaction on the Stability of Tailing Dam,TV649
  17. Electrical Impedance Tomography numerical solution of the problem in some studies,O441.4
  18. Performance analysis and calculation of electromagnetic synchronous generator,TM341
  19. Practice and Improvement of the Suspension System for Labor Contracts in Dealing with Non-regulatory Labor Relations,D922.5
  20. The Expectant Interest Indemnity after the Termination of the Contract,D923.6
  21. Application of Vector form Intrinsic Finite Element Method in the Analysis of Cable Membrane Structures,TU399

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Conductive materials and their products > Special Cable > Superconductor cable
© 2012 www.DissertationTopic.Net  Mobile