Dissertation > Excellent graduate degree dissertation topics show

High-speed precision CNC punch Vibration

Author: DingWang
Tutor: DingWuXue
School: Nanjing University of Technology and Engineering
Course: Mechanical Manufacturing and Automation
Keywords: High speed press Vibration Dynamic balancing Modal analysis Optimal design
CLC: TG385.1
Type: Master's thesis
Year: 2011
Downloads: 127
Quote: 1
Read: Download Dissertation

Abstract


With the increase of the rotational speed of high speed press, the vibration has become more serious. It is necessary to research the vibration reduction of high-speed press. The methods of reducing vibration were put forward by analyzing the vibration generated by inertial force.Firstly, the mathematical modal of high speed operating mechanism had been built up, then did the kinematics and dynamic analysis, and calculated the movement of the slider and the curve of the inertia force, which provided basis for the following simulation. Also the inertial force between balancing and unbalancing were compared, and the inertial force balanced decreased much compared to the unbalanced before.Secondly, the virtual prototype models of press operating mechanism had been established basing on ADAMS and the difference of the results with the theory analysis had been compared after the simulation. The conclusion showed the feasibility of Simulation. Also the dynamic balancing mechanism had been optimized; the mechanism achieved the better balance after optimization.Thirdly, the finite element modals of crank, beam, base and combined frame had been set up in ANSYS. The free modal analysis and the constrained modal analysis were carried out, and the natural frequencies and corresponding modes were obtained and the influences of every step mode were analyzed. The results of the modal analysis showed that the dynamic characteristics met the requirement of design.At last, the dynamic modal of high speed press had been set up and the dynamic differential equation had been derived. The simulation was conducted by MATLAB, and then analyzed the influence of vibration on different parameters. On the base of them, the stiffness and damping of isolator were optimized, and got the appropriate parameters.

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  3. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  4. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  5. Deep Continental Drilling Rig Top Drive Hydraulic System Design and Research Summary,TE922
  6. Humaniod Robot Development and Research,TP242
  7. Research on the Prediction of Underwater Acoustic for a Survey Ship and Reduction for Its Noise and Vibration,TB53
  8. Study of Modal Characteristics of a Car Body-in-White,U463.82
  9. Modal Analysis of BIW Construction & Optimization Design in Modal Parameters,U463.82
  10. Rheological Properties in Processing of Inorganic Rigid Particle Filled Polymer Composites under Vibration Force Field,TQ325.14
  11. Structure Analysis and Optimization Design for 150 Tons Flat-Top Crane,TH213.3
  12. Dynamic Designanalysis and Optimization of Gantry Crane Girder Truss,TH213.5
  13. Random Vibration Reliability Analysis and Research on Solder Joint of PBGA Board Level Assembly,TN405
  14. Modal Analysis, Finite Element Modeling and Stress Calculation of Boom of 46D Truck-mounted Concrete Pump,TU646
  15. Research on Method of the Beam Bridge Structure Vibration Damage Identification,U441.4
  16. Optimizational Design for Structure Parameters of Compound Pendulum Jaw Crushers,TD451
  17. Study on Hdrogen Degassing Effect of Ultrasonic Vibration on Both Liquid Melt and Semi-solid Slurry of Al Alloy,TG292
  18. Parallel six-dimensional shaking table Design and Research,TH762.2
  19. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  20. Based on the finite element analysis to improve the design of medium-duty truck chassis and Test Research,U463.32
  21. A certain type of micro- satellite directional drive system vibration analysis,V414.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold punching machinery and equipment > Stamping machines ( punch)
© 2012 www.DissertationTopic.Net  Mobile