Dissertation > Excellent graduate degree dissertation topics show

Research on Propagation of Ultrasonic in Multilayer Structure with Dissimilar Materials

Author: ZhangGuoQiang
Tutor: GangTie
School: Harbin Institute of Technology
Course: Materials Processing Engineering
Keywords: ultrasonic testing multilayer structure interface wave phased array
CLC: TG115.285
Type: Master's thesis
Year: 2011
Downloads: 146
Quote: 0
Read: Download Dissertation

Abstract


In order to get a reliable result, it’s necessary to control the field distribution of ultrasonic in ultrasonic testing. For that reason, people design some coupling medium to affect the propagating characteristic of ultrasonic, between probe and testing structure, which all contribute to the propagation and the field distribution of the ultrasonic.In this paper, we take copper-steel multilayer structure as an example and build a multilayer model. In this model, ultrasonic propagating through lens, water, copper, steel, the interfaces and the multi heterogeneous materials which all contribute to the propagation and the field distribution of the ultrasonic. In order to present the inner condition, the propagation of the ultrasonic wave should be researched firstly to guide the test. In this article, the distribution of acoustic pressure field has been studied using the principle of geometric acoustic and the Gaussian beam model in copper-steel multilayer structure. The characteristic of propagation has also been researched when the acoustic propagates through the multilayer. Applying the theoretical analysis, the flaws which parallel and incline to the interface have been successfully found by use of point focus transducer.The characteristic of the ultrasonic propagation along the interface of multi materials have further been researched by solving the Stoneley’s secular equation. Using the theoretical conclusion, the tiny flaws which are perpendicular to the interface have also been successfully tested by use of flat transducer.In order to increase the testing efficiency, high efficiency C-scan has been realized by means of phase array transducer. This testing result is in good consistent to the result by the single element transducer, but in much shorter period of time because of the simplified of the mechanical system.At last, to meet the practice requirement in industry, a set of ultrasonic auto-testing system has been develop and researched which possesses the specialty of low cost, high efficiency, great reliability.

Related Dissertations

  1. Large phased array radar antenna array surface manufacturing technology research,TN957.2
  2. Research on the Design of Scanners for Pipeline Complex Weld Inspection,TG439.9
  3. Research of Ultrasonic Testing System Based on ARM Controller,TP274.53
  4. Applications of the Bonding and the Ultrasonic Test in the Liquid Film,TG174.4
  5. Study on Ultrasonic Testing Technology for Motor Bolt in Service,TM31
  6. Based on active infrared and ultrasound scan flip-chip Defects Detection,TN407
  7. Phased array ultrasonic testing optimization of key parameters,TP274.53
  8. Based on ultrasonic circumferential scanning detection system drains,TP274
  9. Battle tanks in tank bottom detection technology,TE972
  10. Based on product quality control of injection molding process,TQ320.662
  11. Wide reconfigurable antennas and key components of the plasma antenna,TN821.8
  12. The Research and Design of Ultrasonic Non Destrucive Testing Equipment,TH878.2
  13. Applicable Software Design for Handheld Ultrasonic Flaw Detector,TP311.52
  14. Design of Handheld Ultrasonic Inspection Hardware Systems,TH878.2
  15. Research of Virtual Ultrasonic-testing System Based Onlabwindows/CVI,TH878.2
  16. A Multi-Layer Finite Element Model Based on Anisotropic Elastic of Coronary Artery and Its Applicationcon,R318.01
  17. Hypertension and associated risk factors in patients with coronary artery stenosis and endothelial function in the brachial artery Discussion,R544.1
  18. Research on the Void Size in Concrete-filled Steel Tube by Ultrasonic Wave Methed and the Rapid Repairing Techniques,TU398.9
  19. The Development of a Kind of Parts Online Identifying System for FMS,TH165
  20. Inspection and Special Transducer for Aerial Special-shaped Structure by Ultrasonic Testing,TB552
  21. Research and Practice of the intelligent Web - based courseware publishing platform,TP311.52

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallurgy ( Physical Metallurgy ) > Analytical tests of the metal (Metal Testing and Materials ) > Physical test method > NDT > Ultrasonic testing
© 2012 www.DissertationTopic.Net  Mobile