Dissertation > Excellent graduate degree dissertation topics show

Study on Forming Mechanism of the Fe-Al2O3-FeAl2O4 Composite Coating by Reractive Plasma Spraying

Author: ZuoGuoPeng
Tutor: HeJiNing
School: Hebei University of Technology
Course: Materials Science
Keywords: Spray granulation Reactive plasma spraying Composite coating Reaction Mechanism Quenching method
CLC: TG174.4
Type: Master's thesis
Year: 2011
Downloads: 10
Quote: 0
Read: Download Dissertation

Abstract


This selection of industrial aluminum powder and iron oxide powder as raw material, suitable for plasma spraying of composite powder prepared by spray granulation and by plasma spraying technique Composite Powder into a metal-ceramic composite coating . To prepare a composite coating microstructure morphology and phase composition of the observation and analysis, combined with the quenching method and the thermodynamic analysis, analysis of the obtained data , and to study the mechanism of the formation of the whole reaction . Ratio, the optional industrial aluminum powder and iron oxide powder in accordance with certain reaction ratio by dry mixing , wet mixing methods such as the powder is mixed uniformly , and adding a binder to improve the binding strength of the powder prepared as a slurry , and finally by the granulation prepared by the composite powders . After screening , the composite powder of uniform size and shape of the rules , suitable for spraying . Stream to prepare a composite powder is fed into the plasma flame , powder heated self - propagating reaction occurs , the product by means of the speed of the plasma gas is deposited on the substrate surface and stacked on top of each other to form a composite coating . Composite coating that FeAl2O4 major organizations , and uniform distribution of Fe and A1203 particles . Quenching test composite powders , different flight distance under the organization of the composite powders coating , coated tissue components by means of XRD analysis ; composite powders by differential thermal analysis , organizational change in the heating process and reaction conditions; by Spray-Watch2i observations composite powders speed variation of the temperature during the flight ; data obtained by the above combination of thermodynamic analysis, to determine the reaction of the composite powder in the flame stream includes three stages . Each stage of the reaction will release a lot of heat , but the reaction the intensity gradually reduce eventually stabilize . Deduce the chemical reactions that occur in each stage and to determine the reaction mechanism , it is clear to obtain a metal-ceramic composite coating formation process .

Related Dissertations

  1. Salinomycin Granules Process Improvement,S859.79
  2. Containing pyridyl group metal complexes Synthesis and Structure,O627
  3. N-heptane HCCI combustion process temperature thermodynamics and kinetics theory,O643.21
  4. The Study of Microstructure and Performance of La2 O3+CeO2-Ni-WC Composite Coating by Vacuum Fusion Sintering,TG174.44
  5. Thermal oxidation protective coating spray preparation and protection mechanisms,TG174.442
  6. Brucine , strychnine and human serum albumin between the role of non-covalent binding,R969
  7. Kinetics of Catalysis Hydrolytic Depolym Erization of Poly (ethylene Terephthalate) Under Microwave Irradiation,O631.3
  8. Studies on Anti-Corrosion Behaviors of Electroless Deposited Ni-P and Ni-P-PTFE Coatings in Seawater,TQ153.1
  9. The Mechanism of the Degradation of DNS and Its Kinetics,O643.12
  10. Mechanism Study on Mercury Homogeneous and Heterogeneous Reaction,O643.12
  11. Oxidation of arsenic-containing copper sulfide concentrate roasting,TF811
  12. Study on the Ceramic-metal Composite Coatings on the Surface of Carbon Steel by Laser Cladding,TG174.44
  13. Fabrication and Biocharacter of Composite Coating on Mg-Zn Based Alloy,TG174.4
  14. Study on Forming Mechanism of the Fe-Al2O3-FeAl2O4 Composite Coating by Reactive Plasma Spraying,TG174.442
  15. Process and Properties Research of the SiO2f/SiO2-BN Composites by Urea Route,TB332
  16. Preparation and Catalytic Activity of Electrode Materials for Water Electrolysis,TQ116.2
  17. Theoretical Studies on the Mechanism of CO Catalytic Oxidation on Au Surfaces,O643.32
  18. The Study on Reaction Mechanism and Dynamics of MgO Preparation with Molten Salt,O614.22
  19. The Investigation on Boiling Heat Transfer of Nano-Fluids,TK124
  20. Matrix Isolation FT-IR Study the Reaction Mechanism of Ozone and Alkenes,P402
  21. Studies on the Preparation Process and Protective Properties of the Cold Spray Copper Alloy Coatings,TG174.44

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology
© 2012 www.DissertationTopic.Net  Mobile