Dissertation > Excellent graduate degree dissertation topics show

Study on Mechanical Properties of Modified Basalt Fiber and Its Composite

Author: HeZuo
Tutor: SongShenHua；CaoHaiLin
School: Harbin Institute of Technology
Course: Materials Science
Keywords: basalt fiber phenolic resin nano-particle modification mechanical property thermal stability
CLC: TB332
Type: Master's thesis
Year: 2011
Downloads: 240
Quote: 1
Read: Download Dissertation

Abstract


As a kind of advanced inorganic high-performance fiber, basalt fiber has excellent mechanical properties, thermal stability and chemical resistance. Currently, basalt fiber has replaced to some extent of glass fiber, PBO fiber and carbon fiber as reinforcement for fiber reinforced resin matrix composites. It is much likely that basalt fiber turns into the fourth most used fiber, which has high strength and modulus. But like other high-performance fibers, basalt fiber’s inert surface, which would result in poor adhesion to the resin matrix, reduces the mechanical properties of the composites. Hence, there is a lot of attention paid to the methods of basalt fiber surface modification.In this work, it was expected that basalt fiber and its composite could show higher mechanical properties through surface modification with coating. Meanwhile, higher thermal stability was also needed, which could guarantee basalt fiber reinforced polymer composite to have lower mass loss and higher residual interlaminar shear strength after high-temperature tests.Composites, which were reinforced with basalt fibers coated by different nano-particle modified film-forming agents and sizings, were prepared through an optimized thermal compression molding process. Through comparison of interlaminar shear strengths, high-temperature mass losses and residual interlaminar shear strengths, it was shown that the composite which was reinforced with the basalt fiber coated by SiO2 modified sizing exhibited the best interlaminar shear strength, and the composite reinforced with the basalt fiber coated by ZrO2 had the lowest mass loss and the highest residual interlaminar shear strength.The effects of diameter and concentration of nano-SiO2 particles on basalt fiber’s surface energy, mechanical properties and composite’s mechanical properties were studied. Additionally, composites prepared by ZrO2 and CeO2 modified phenolic resin was tested. It was concluded that 0.2wt% concentration and 350nm SiO2 particles could best improve the basalt fiber’s surface polarity and composite’s interlaminar shear strength. Composites prepared by ZrO2 and CeO2 modified phenolic resin had an equal interlaminar shear strength with the composite reinforced with the original basalt fiber, and a lower residual interlaminar shear strength than that of composites reinforced with the basalt fiber coated by ZrO2 and CeO2 modified sizing. However, composites prepared by ZrO2 and CeO2 modified phenolic resin presented the lowest mass loss in high-temperature tests.

Related Dissertations

  1. Preparation of Based on the Phenolic Resin of Activated Carbon and Adsorption-Photopcatalytical Character of Supported TiO2,TQ424.19
  2. Thermal Stability of Complexes of Chitosan Quaternary Ammonium Salt and Metal Ion,O634
  3. Synthesis and Application of the chloro- methoxy fatty acid methyl esters,TQ414.8
  4. Study on the Synthesis and Properties of Copolyimides Derived from ODPA/Isomeric ODA,TQ323.7
  5. Syntheses, Structures and Properties of Metal-organic Frameworks Based on Dicarboxylate Ligands,O621.13
  6. Imidazolium ionic liquids Thermal Analysis,O626.23
  7. Synthesis, Characterization and Properties of One-dimensional Silicon Carbide Nanomaterials,TB383.1
  8. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  9. Research and Engineering Improvement of Gelatin一based Gummy on Its Thermodynamie Stability,TQ461
  10. Screening Mutational Sites That Enhance Protein Thermostability by High Temperature Molecular Dynamics Method,Q51-33
  11. Study of SiN x -Doped SbTe Phase-Change Materials for Phase-Change Random Access Memory,TP333
  12. 10kV grounding resistor Thermal Stability,TM862
  13. Purificiation of Cryptococcus Laurentii Lipase and Rapid Measurement of Lipase Thermostability,Q78
  14. Microstructure and Property of Friction Stir Welding Jiont for High Strength Aluminumalloy Under Controlled Cooling Condition,TG407
  15. Study on Microstructure and Properties of Deformation Processed Cu-Fe in Situ Composites,TB331
  16. The permeability of basalt reinforcement composites molding process with VARTM Monitoring Technology,TB33
  17. Pore Structure Characteristics and Durability Analysis of Fiber Reinforced Concrete,TU528.572
  18. The Study of 6082 Al-Mg-Si Alloy Joints’ Mechanical Properties and Microstructure by Ar Arc Welding,TG407
  19. Mechanical Property Study of Open Spandrel Bonded Prestressed Steel Reinforced Concrete Beam,TU398.9
  20. Study on Preparation and Properties of Silver Oxide Thin Film,O484.1
  21. Laser Welding of Dissimilar Metal of Aluminium and Steel,TG456.7

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile