Dissertation > Excellent graduate degree dissertation topics show

Reliability of Ventilation System Based on Failure Modes, Effects Analysis Andfault Tree Analysis

Author: WangLi
Tutor: LiuJian
School: Liaoning Technical University
Course: Safety Technology and Engineering
Keywords: ventilation system in mine reliability Failure Modes and Effects Analysis (FMEA) Fuzzy Fault Tree Analysis (FTA) safety technical measure
CLC: TD724
Type: Master's thesis
Year: 2011
Downloads: 169
Quote: 0
Read: Download Dissertation

Abstract


Reliable ventilation system is very important to safe, efficient and economic production in mine. The reliability study of ventilation system is not very popular in non-coal mines, however be done frequently in coal mines. Meanwhile, with the depletion of the shallow resources, more and more domestic metal mines are deeping underground more than one kilometer, whose ventilation system are more and more complicated with more roadway. So, more emphasis be put on the reliability study of ventilation system in non-coal mines is very important with great practical significance.This paper study the ventilation system of Jinchuan Longshou Mine. Through lots of investigation work in site, such as datas collection, wind speed and wind volume measurement, the method with FMEA and FTA was combined to study system reliability. FMEA analysis, using the risk priority number RPN, shows that improving the network design, feedback system are the most effective way to strength the reliability of ventilation system, and strengthening ventilation structures inspection, repairing or reinstalling are also necessary. Triangular fuzzy FTA method was established with "mine ventilation system failure" as the top event, air flow interruption, airflow reverse, airflow circulation, air flow short circuit, leakage, toxic and harmful gases as the first grade events, and feedback system failure as the condition door. The results show that the large number of minimal cut sets is high to 549 for the first grade event 7 named“monitoring the feedback system failure”mainly. With most of the remainders being in range of 0.0050~0.0100. The first event 7 "feedback system failure" set the main reason for the large number, is an effective way to increase system reliability. Meanwhile, it is also very important to improved ventilation. At last, several technical measures to improve the ventilation system reliability are carried out.

Related Dissertations

  1. Development and Preliminary Application of the Questionnaire on Emotional Labour of the Middle School Teacher,B841
  2. The Research on Reliability of Low-Voltage Power Line Communication,TM73
  3. The Research and Application of Software Reliability Test for User Right Management System,TP311.53
  4. Research on Subsea Pipeline Repair Coupling,TE973
  5. Research and Application on Reliability Technology of Mine Hidrological Monitoring System,TD742.1
  6. Body Sensor Networks Adaptive Communication Protocol,TP212.9
  7. Periodic testing of the storage system reliability model,O213.2
  8. Degradation of Amorphous Silicon Thin Film Transistors under Gate and Drain Voltage Bias Stress,TN321.5
  9. Design of a Mine Smart Sensor Network Based on M-Bus,TP212.9
  10. Dynamic Response and Reliability Analysis of Bus Body,U463.82
  11. Reliability Test and Analysis of ASON Network,TN929.1
  12. Study on Reliability for Machining Center,TG659
  13. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  14. With PFC LED lighting research and design of chips used in,TM923.34
  15. The Study on Growth Mechanism of Kirkendall Void and Its Inhibition at Interface of Micron Solder Joints,TG401
  16. Reliaility Analysis to the Structure of Existing RC Bridge Before and after Reinforcement,U445.72
  17. Analysis and Discussion of a Reliability Assessment Method of Energy Monitoring System for Public Building Based on Fault-Tree Analysis,TU111.195
  18. Research of Reliability Test Technology for Automatic Switch,TM564.8
  19. Study on Applying Hierarchy of Needs Theory and Human Caring Theory to Construct the Optimal Companion Model,R47
  20. Deep manned submersible pressure hull fatigue reliability analysis of titanium,U661.4
  21. Error Control Scheme for High Performance Network-on-Chip Routing,TN47

CLC: > Industrial Technology > Mining Engineering > Mine safety and labor protection > Mine ventilation > Ventilation system, ventilation and equipment
© 2012 www.DissertationTopic.Net  Mobile