Dissertation > Excellent graduate degree dissertation topics show

Research of Piezoelectric Ceramics Power with High Frequency and Low Ripple

Author: WangZhiLiang
Tutor: HuangXiangDong
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: piezoelectric ceramic power signal generate high speed data quisition micro-position platform
CLC: TM282
Type: Master's thesis
Year: 2011
Downloads: 72
Quote: 0
Read: Download Dissertation


Micro-displacement position technology is a key factor in nanotechnology stage. Piezoelectric ceramic actuator generates micro-displacement by converse piezoelectric effect. For its small size, high resolution, high frequency response and other advantage it becomes an ideal micro-displacement device. Ultra-precision micro-position platform achieves accurate micro-position by the core of platform, piezoelectric ceramic actuator. It needs not only high positioning accuracy, but also high frequency response. In order to obtain the above function, how to design a piezoelectric actuator power, with high frequency response and low ripple, becomes a very important part in this platform.In this paper, comparing the theory of the PZT driver power in domestic and national, error magnify type and high voltage op-amp type is selected to design the high frequency response and low ripple power. The main contents are as follows:1. High-frequency response piezoelectric ceramics driver based on the error amplifier. To make the output displacement of piezoelectric ceramics has the quality of high-frequency response, the driver requires high current, high-voltage output characteristics, and so a driver of piezoelectric ceramics is designed and implemented by discrete components of the error amplifier. And four parallel output circuit is used in the part of the power amplifier in order to increase the drive current to achieve the rapid drive of piezoelectric ceramics. Experiment indicates the frequency response of the designed PZT power up to 1 kHz when working at Maximum voltage amplitude 120V), its highest frequency response is 2.4 kHz.2. Research on the static characteristics of piezoelectric driver. When drive power is at rated load (capacitive), the frequency response and ripple specifications are directly related to whether the experimental platform contains high frequency response and high precision. Through in-depth analysis of the causes of ripple, find out that the main factor affecting the ripple is the input offset voltage of error amplifier circuit in the prior to circuit. And by theoretical calculation the optimal value of the input offset voltage is obtained. Experiments show that, when working within its output voltage the ripple can be controlled within 5mV. In addition, by using the method of feedback zero compensation, the circuit stability is increased when driving capacitive loads. The correctness of the design is verified by simulation and experiments. 3. Control circuit of the Drives. Using FPGA as the main chip of the circuitry, it controls the DAC to complete signal generation. The Verilog language is used in the programming of the FPGA. The circuitry outputs sine wave, square wave, triangle wave and DC signal. On this basis, drive control system is developed. Labwindows software is used in the subject to complete the data acquisition card program design of PCI-1716. The design can achieve single-or dual-channel sampling, sample data preservation, sample signal waveform display, the signal frequency and amplitude display.

Related Dissertations

  1. Numerical Simulation and Experiment Study on Electromagnetically Induced Acoustic Emission,TM15
  2. Precision micro- displacement worktable vertical scanning white light interferometer,TH744.3
  3. Research on Compensation of Hysteresis in Piezoceramic Actuators,TM282
  4. Study on Low Temperature Sintered PSN-PZT Piezoelectric Ceramics,TM282
  5. ( La , Nb) - doped TiO_2 varistor ceramic second - phase research,TM282
  6. Preparation and Properties of Li+ Doped KNN and Ba2+ Doped BNT Composite Ceramics,TM282
  7. The Research on PZN-PLZT Piezoelectric Ceramics with High Properties,TM282
  8. Research of Nonlinear Dynamic Characteristics and Control for Laminated Beam with Piezoelectric Ceramic,TM282
  9. Preparation and Characterization of the KNN-based Lead-free Piezoelectric Ceramics,TM282
  10. Research on the Properties of the PZT Piezoelectric Ceramics Doped with Antimony and Lithium and the Optimization of Process,TM282
  11. The Study of Piezoelectric Properties on BaTiO3 Based Lead-free Piezoelectric Ceramics,TM282
  12. Research on Microstructure and Properties of ZnO Varistor Ceramics Induced by Laser Shock Processing,TM282
  13. Preparation, Enhancement and Toughening of PBSZT Piezoelectric Ceramics,TM282
  14. Preparation and Modification of K0.5 Na0.5 NbO3-based Lead-free Piezoelectric Ceramics,TM282
  15. Influence of CuO Additive, TiO2 Raw Material and Preparing Techniques on Physical Properties of BaTiO3 Piezoelectric Ceramics,TM282
  16. Synthesis and Characterizations of Piezoelectric Ceramics and Their Composite Materials for Energy Harvesting Applications,TM282
  17. The Time and Frequency Domain on Test Theory and Method of Pzt Piezoelectric Ceramics Thick Film Using Ultrasound,TM282
  18. Measuring Theory and Method for Acoustic Characteristics of Guided Wave in Piezoelectric Thin Layer,TM282
  19. Lead-free Piezoelectric Ceramics (K_ (0.44)) Na_ (0.52) Li_ (0.04)) (Ta_ (0.2) Nb_ (0.8)) O_3-xCeO_2 Preparation and Properties,TM282
  20. Study on Lead-free P(VDF-TrFE) Copolymer Matrix Pyroelectric Composites,TM282

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Electric and ceramic materials > Piezoelectric ceramics
© 2012 www.DissertationTopic.Net  Mobile