Dissertation > Excellent graduate degree dissertation topics show

Researches on Modeling and Validation of Ultrasonic Motor

Author: ShiWeiJia
Tutor: MaJie
School: Harbin Institute of Technology
Course: Control Science and Engineering
Keywords: Ultrasonic Motor Equivalent Circuit Governing Characteristic Mechanism Characteristic
CLC: TM359.9
Type: Master's thesis
Year: 2011
Downloads: 51
Quote: 0
Read: Download Dissertation

Abstract


In contrast to traditional electromagnetic motors, ultrasonic motors provide co- mpact design, larger torque to volume ratio, high precision, high holding torque in the absence of applied power, silent operation and faster response. However, the de- velopment of ultrasonic motors has been limited in precision mechanical and servo systems, primarily due to the particularities of construction and movement principle. And ultrasonic motors exhibit strong nonlinear response during operation. To be ap- plied in precision electromechanical servo system, the present dissertation proposes a comprehensive equivalent circuit model for the purpose of prediction the motor per- formance, including governing characteristic and mechanism characteristic. And to test the model experiments were designed. The model is very usefull for controller and driver development.Firstly, the energy transfer process between electric energy and mechanical energy are discussed in detail in this paper. And the piezoelectric effect in ultrasonic motors, the principle of traveling wave and the fundamental of elliptical motion are analyzed. There are three speed regulation methods which include voltage amplitude, frequency and phase. The theoretical derivation and analysis of each method are discussed.Secondly, based on the energy transfer process, combined with Mason’s model, the equivalent circuit of a free stator is set up. Considered the preloaded force and the friction force synthetically, the equivalent circuit of ultrasonic motors is built. The inputs of the model are the two driving voltage signals; the output is the current signal which is reflected to the speed of the motor. The model includes three parts, as follows the model of the stator, the model of the contact area and the model of the rotor. The equivalent circuit can be used in the qualitative analysis of the governing characteristic and mechanism characteristic.Thirdly, based on the equivalent circuit of ultrasonic motors, the simulation analysis is carried out. And the test platform is put up. By contrast with the simulation results and the test results, the correctness of the model is verified.

Related Dissertations

  1. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  2. Study on a New Novel Avalanche Photodiode for Suppression of Edge Pre-breakdown,TN364.2
  3. Composite cage rotor induction motor starting performance of the design and research,TM343
  4. Research on Miniaturized Folded Waveguide Power Dividers,TN626
  5. Research on Friction-wear Experimental Device and Wear Experiment for Traveling Wave Type Ultrasonic Motor,TM359.9
  6. Research on the Ultrasonic Motor Driving and Control Based on the Resonant Booster,TM359.9
  7. Research on Phase-shift PWM Driving and Control of Traveling-wave Ultrasonic Motor,TM359.9
  8. Research on Traveling Wave Usm Using Cantilevel Type Bending Mode Sandwich-Transducer,TM359.9
  9. Research on Data Acquisition System of Digital Substation and the Protection Theory for Transformer Based on It,TM76;TM63
  10. Low Voltage Driving Ultrasonic Motors Based on Multilayer Piezoelectric Ceramics,TM359.9
  11. Two -phase traveling wave ultrasonic motor system average model,TM359.9
  12. Study on PWM Control Methods of Traveling Wave Ultrasonic Motor,TM359.9
  13. Research on the Pneumatic Control Valve Driven by Ultrasonic Motor,TM359.9
  14. Experimental Researches on Hysteretic Nonlinearities and Impact Properties of Piezoelectric Structures,TM22
  15. Modeling and Operating Simulation of Variable Frequency Transformer,TM343
  16. The Characteristics Analyses of a Comb Vibratory Mems Resonator,TN751.2
  17. Design and Simulation of Micromachined Silicon Condenser Microphone with Free Floating Diaphragm,TN642
  18. Analysis of the Effects of Electrode on Vibration of Piezoelectric Plate with Dissipation,O327
  19. Study on All Parallel Directly Feeding System with Reinforce Wire,U223.6
  20. Modeling and Application of LTCC Passive Components,TP391.44
  21. Electrochemical Corrosion Characteristic of Direct Current Pulsed Plasma Sourse Nion AISI 304 Stainless Steel,TG156.82

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Other
© 2012 www.DissertationTopic.Net  Mobile