Dissertation > Excellent graduate degree dissertation topics show

Reserch on Conversion and Storage Technology of Motion Body Vibration Energy to Electric Energy

Author: ZhangJing
Tutor: YangQingXin
School: Hebei University of Technology
Course: Electrical Engineering
Keywords: vibration power conversion storage charge up the mobile phone
CLC: TM919
Type: Master's thesis
Year: 2011
Downloads: 66
Quote: 0
Read: Download Dissertation

Abstract


Today,economic develops rapidly,the need for energy increases.However,the conventional energy resources what can recovered are limited,more and more people recognize the energy crisis.The supply of adequate energy is the foundation of social development.So,the top priority is how to use the new energy fully and effectively.Owing to the vibrational energy exists widespread.A converter device was designed to turn the motion’s vibrational energy to the electrical energy, and studies the follow-up segments using this electrical energy.Firstly,this paper sets about from a basic principle,the induction coil induces electromotive making use of the relative motion between the permanent magnet and the induction coil,then determines the material, the structure and the main parameters of the permanent magnet and the induction coil, designs the structure of the generation device and simulates in the sofeware.Because of this electromotive charges up the mobile phone using as a backup power,the voltage of the mobile phone battery is 3.7V-4.2V,the charging voltage should be higher than 4.2V. This can be a basis for designing of the double voltage rectifier,the filter and the voltage stabilizing circuit, achieving the requirement for the charging voltage of the mobile phone.Finally,the storage module of the electrical energy was designed and the principle of work of the double voltage rectifier circuit was analyzed,the filter circuit and the voltage stabilizing circuit as well as the choice of all of circuit element.Then uses the pspice simulation software to set up the simulation model of the double voltage rectifier circuit,the filter circuit and the voltage stabilizing circuit and obtain the simulation results.The simulation results verify the feasibility of the theoretical.

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. Study on LC Resonance Charge and POS Based Pulsed Power Supply,TN782
  4. Research on Compression, Operation and Query Processing Methods of Massive Datasets,TP311.13
  5. Research on the Image Real-Time Acquisition, Storage and Image Processing System,TP391.41
  6. Implementation of Data Compression, Operation and Query Processing System Based on BAP,TP311.13
  7. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  8. Research on Data Acquisition and Transmission Technology in High Speed Digital Image Acquisition System,TP274.2
  9. Design and Implementation of the HL7 Message Parsing and Store in the Medical Information Integration Platform,TP311.52
  10. Periodic testing of the storage system reliability model,O213.2
  11. Research on Dynamic Characteristics of Rolling Main Drive System by Taking into Account of the Gear Variable Stiffness,TH113
  12. The Development of a New Portable Internal Combustion Blast Tamping Machine,U216.631
  13. Non-circular Planetary Gear Kinematics and Dynamics Simulation Based on ADAMS,TH132.41
  14. Research on DEM Simulation of Vertical Vibration Material Conveying,TH234
  15. Dynamic Designanalysis and Optimization of Gantry Crane Girder Truss,TH213.5
  16. Carbon Storage and Its Allocation of Rubber Plantation in Xishuangbanna, Southwest China,S794.1
  17. Analysis and application of large structure vibration test based on wireless sensor networks,TP274
  18. Anlysis and Control the Noise of Low Pressure Gear Pump,TH325
  19. Research on Vibration Viscometer,U414
  20. A Research on the Optimization of Automotive Powertrain Mounting System and the Effect of Vibration in the Vehicle,U467.42
  21. Study on the Optimal Allocation and Simulation on Energy Storage System in Wind Power,TM614

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Other independent power
© 2012 www.DissertationTopic.Net  Mobile