Dissertation > Excellent graduate degree dissertation topics show

Aerodynamic Performance Influence of Curved Blades to the Guided Blade Cascades

Author: ZuoXueSong
Tutor: ZhangGuangWei；JinJunLu
School: Xi'an University of Petroleum
Course: Mechanical Engineering
Keywords: Keyword: Turbine Curved Blade Secondary Flow Flow Loss Numerical Study
CLC: TK263.3
Type: Master's thesis
Year: 2010
Downloads: 37
Quote: 0
Read: Download Dissertation

Abstract


Turbine is the national economic construction in an important industry, is the basis for the power industry, but also reflects a country’s level of design and manufacture of steam turbines. After 50 years of continuous efforts, China has initially established when the steam turbine industry, the full use of foreign technical gradually move to a path of self-development capacity. Since reform and opening, China’s turbine industry has been rapid development. As China’s rapid economic development and stable demand for electricity has increased every year, especially in recent shortage of energy resources, improve the overall performance of steam turbine workers strive our goal.Using three-dimensional geometry modeling software UG build three vane cascade, the surface geometry with high precision. For the software division with autogrid structured to provide a good model for grid. Structured CFD grid to speed up the convergence rate, and is likely to converge, to correctly simulate turbine cascade flow field set up the basic environment. The numerical results indicate that anti-bent blade can form anti-meridian plane "C" type pressure distribution, while being bent form "C" type pressure distribution. By the "C"type pressure distribution in the channel was carried to the leaves of the central vortex, intensity and the extent of the increase can be more effective entrainment of the low energy fluid near the end wall, reducing the side wall near the loss, while the central leaves losses increase. The total pressure loss from the point of view, curved blade can effectively change the loss distribution, the total pressure loss from the total number of comparative point of view, makes the loss of anti-bend increased, reducing the total loss is bent, curved blade of which is the minimum loss.

Related Dissertations

  1. Performance analysis and calculation of electromagnetic synchronous generator,TM341
  2. Pilot Plant Experiment and Simulation Research on NO_x in Oxy-fuel Combustion Technology,X701
  3. Research of High Temperature Air Combustion Model and Optimization of Burner Configurations,TK16
  4. SNCR technology using the combustion and denitrification reaction process simulation,X701
  5. Two-dimensional numerical simulation of flow with complex boundary Research and Application,TV131.6
  6. Imported high-pressure cylinder turbine vanes inclined Numerical study,TK263
  7. Trapezoidal cross-section channel asymmetric heating thermal performance numerical simulation,TK124
  8. The Study on Simulative Flow Performance Affected by Turbulent Model in Machinery with Impeller,O357.5
  9. Effect on Aerodynamic Performance of Turbine Stator Cascade by End Slotting,V231.3
  10. The Research of Wind Characteristic Parameters and Aerostatic Stability of Self-Anchored Suspension Bridge,U448.25
  11. Comparison of Turbulence Model and Numerical Simulation of Aerodynamic Performance in Turbomachinery,O357.5
  12. Numerical Study of Flow Characteristics and Performance Inside Centrifugal Impeller,TH452
  13. New Power Flow Algorithm Takes the Static Characteristics of the Generators and Load into Account,TM744
  14. Double pontoon floating breakwater hydrodynamic study,U656.2
  15. Numerical Study on Damage Detection of Steel Beams Based on Piezoelectric Guided Wave Propagation,TU391
  16. Numerical Study on Microwave Heat-Therapy of Benign Prostatic Hyperpasia,R697.3
  17. Convection heat transfer of non-Newtonian fluid in the rotation curve inside the tubes,O373
  18. Stability and Mixing Character for Buoyant Jets in Quiscent Shallow Water,TV131
  19. Theoretical and Experimental Research on Hot Gas Secondary Injection for Solid Rocket Motor,V435
  20. The Study on Electron Acceleration in Magnetic Reconnection and the Numerical Simulation of the Solitary Kinetic Alfvén Waves,P353
  21. Numerical Investigation of Bubble Behavior,O359.1

CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam turbine (steam turbine,steam turbine ) > Structure > Leaves ( vapor film)
© 2012 www.DissertationTopic.Net  Mobile