Dissertation > Excellent graduate degree dissertation topics show

Reverse Engineering and Finite Element Analysis of Turbocharger Comperssor Impeller

Author: LiuLiQun
Tutor: YangGuangYan
School: Northeastern University
Course: Mechanical Design and Theory
Keywords: turbocharger compressor impeller reverse engineering strength analysis optimization design
CLC: TK403
Type: Master's thesis
Year: 2009
Downloads: 113
Quote: 0
Read: Download Dissertation


The turbocharger is always present research hotspots as the important means to improve engine performance, however, the design of compressor impeller is difficult to develop. Compressor impeller is a high-speed rotating machinery, which working environment is very bad and endures the combined effect of centrifugal force and aerodynamic force, so blade fault occurs frequently. Moreover, with the continuous improvement of turbocharger compression ratio and rotating speed, not only impeller mechanical load is increased, but also longer life and lower costs are required. Therefore, the strength requirements of impeller is also getting higher and higher, which makes strength analysis become more important for the purpose of structural optimization. Using finite element software for the impeller strength analysis and optimal design has become an important part of the design process.How to pay attention to introducing advanced foreign technology, while strengthening the digestion and absorption and self-developed abilities, is the main issues that our country turbocharger industry faces. In this paper, taking a turbocharger compressor impeller for the research object, the impeller of reverse engineering and finite element analysis was studied and discussed. Using reverse engineering technology achieves three-dimensional reconstruction of the impeller sample, and using finite element software achieves strength analysis and structural optimization of the reconstruction of the impeller, to provide some references to the impeller design.In this paper, firstly, combination of reverse engineering software and CAD software achieves the reconstruction of three-dimensional CAD model of the impeller sample. Then, the models are simplified, and the simplified models are imported to the finite element analysis software for strength analysis to study the stress distribution characteristics of the impeller. Finally, based on strength analysis of the impeller, application of finite element software optimizes the structure of the impeller, and application of CAD software reconstructs the impeller model based on the optimized sizes.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  3. Research on Setting Innovation Problems of Mathematics in College Entrance Examination,G633.6
  4. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  5. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  6. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  7. Modal Analysis of BIW Construction & Optimization Design in Modal Parameters,U463.82
  8. FEA of the Small Multi-function Chassis Frame and Its Lightweight Design,S223.91
  9. 3D Reconstruction of Artificial Teeth and Software Development Based on Reverse Engineering,TP391.72
  10. Simulation Research on Hydraulic System of Extra-High Pressure Water Jet Equipment,TH137
  11. Reliability Robust Design of Impeller of Large Centrifugal Compressor,TH452
  12. Research narrower than the opening Kita highly optimized root,TU347
  13. Strength Analysis and Parameter Optimization of Single Channel Drum Dryer,TK173
  14. Strength Analysis and Parameters Optimization of the Cylinder of Three-channel Rotary Dryer,TK173
  15. Research of the Design and Manufacture of REAC Lined Tube for Resisting Flow Induced Corrosion,TE932
  16. Research of Telescopic Boom with Single Cylinder and Pinning System for Truck Crane,TH213.6
  17. Structural Analysis & Optimization Design Research of Process Bogie Based on AWE,U266
  18. Reliability-based Optimization Design for Automobile Components Based on JC Method,U462
  19. Research on Lengthened Hull of Landing Craft,U662
  20. Design and Simulation of Hot Precision Forging Die for Spur Bevel Gear,TH132.41
  21. Study on Manufacturing of Computer Monitor Stand Based on Reverse Engineering (RE) and Rapid Prototyping (RP) Techniques,TP334.1

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > General issues > Structure
© 2012 www.DissertationTopic.Net  Mobile