Dissertation > Excellent graduate degree dissertation topics show

Research on Disassembly Technology in Virtual Maintenance of Steam Turbine

Author: YuTianYu
Tutor: ZhuHaiTao
School: Harbin Engineering University
Course: Mechanical Manufacturing and Automation
Keywords: steam turbine selective disassembly disassembly planning maintenance simulation
CLC: TP391.9
Type: Master's thesis
Year: 2011
Downloads: 108
Quote: 1
Read: Download Dissertation


Maintenance is an important guarantee to resume operation after a failure of steam turbine. The maintenance training could improve maintenance efficiency for the maintenance personnel and accomplish the maintenance work quickly, accurately and efficiently. However, the current maintenance training ways drop behind, which has a significant impact on maintenance of steam turbine. The traditional maintenance training patterns are unable to meet the maintenance requirements of modern steam turbine. Virtual reality technology is an effective way to solve the maintenance problems above for improving and enhancing the maintenance training.Disassembly is the major work in the process of maintenance. The disassembly of steam turbine is mainly discussed in this paper. On this basis, the simulation of maintenance process is carried out for a model of marine steam turbine. And a virtual maintenance system of steam turbine is developed, which is used for the guidance of steam turbine maintenance training. Firstly, the steam turbine disassembly is analyzed and summarized in detail, and the steam turbine maintenance scheme is established. Through the extraction and supplement of steam turbine disassembly information, the steam turbine model is built by adopting the graph theory and shown by using disassembly graph. Then the disassembly directions of steam turbine components are judged and calculated, and the disassembly directions of components are obtained. After that, selective sequences are given by decomposing the disassembly graph gradually. Optimum or sub-optimal selective disassembly sequences are got by adopting optimization algorithm. And then the model of virtual maintenance environment in accordance with the real steam turbine installation and operation environment is established. The maintenance of steam turbine is simulated under this circumstance. Finally, a virtual maintenance system of steam turbine is developed on the basis of combining disassembly information. The visualization of maintenance process is achieved. It can be used in maintenance training and guidance, which has a strong practical value and significance.

Related Dissertations

  1. Development of Turbine Rotor Dynamic Balance System,TH877
  2. Research and Development of Supercritical, Ultra Supercritical Steel Blade in Benxi Steel,TG335
  3. Research and application of blast furnace gas -fired steam turbine blowers,TF321.8
  4. A Combined Numerical Simulation and Optimization of Low Pressure Exhaust Hood and the Last Stage in High Power Steam Turbine,TK263
  5. Study on Optimized for Welding Process of the Crack in High-pressured Cylinder of Steam Turbine,TG457
  6. Mechanical analysis of the early failure of the 125MW steam turbine catheter pads,TG404
  7. Energy Saving Research of Cold Source Field of Combined Heat and Power Unit,TM611.3
  8. Study on the Life of Domestic 600MW Supercritical Steam Turbine Rotor,TK263
  9. Safety Analysis on Torsional Vibration of Large Steam Turbo-generator Shafts,TM311
  10. The Experimental and CFD Research of the Extraction System in Steam Turbines,TM621
  11. Modeling and Machining Simulation for Free-form Surface Parts Based on Group Technology,TG659
  12. Research on the Relationship between Cumulate Damnification of Structure and Magnetism Memory Domino Offect,TH114
  13. The Flow Path Retrofit and Evaluate Test of a 125MW Steam Turbine,TK26
  14. Maintaince Strategy of 200MW Steam Turbine,TK268
  15. Numerical Investigation of the Flow Field in Steam Extracting Opening and Nearby Stages in Steam Turbine,TK261
  16. The Analysis and Research on Control System of 600MW Steam Turbine,TK264.2
  17. Intelligent Fault Diagnosis System of 600MW Steam Turbine,TP277
  18. Vibration Fault Diagnosis of Large Steam Turbine Generator Based on Expert System,TM311
  19. Analysis and Research on the Character of Large Turbine Generator in Leading-phase Operation,TM311
  20. Study on Remote Fault Diagnosis System for Turbine Units,TM621

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Computer simulation
© 2012 www.DissertationTopic.Net  Mobile