Dissertation > Excellent graduate degree dissertation topics show

Aircraft electromechanical servo system harmonic gear transmission Dynamic Performance Analysis and Research

Author: ShiWei
Tutor: ZhangQing
School: Nanjing University of Technology and Engineering
Course: Mechanical Design and Theory
Keywords: Mechatronic Mervo System Harmonic Drive FEA Simulink
CLC: TH132.41
Type: Master's thesis
Year: 2011
Downloads: 67
Quote: 1
Read: Download Dissertation

Abstract


Mechatronic mervo system of spacecraft works in the conditions of high-impact, high-inertia, short-term overload. The load capacity and dynamic performance of general harmonic drive can not satisfy the demand of high-load, high stiffness, high response, special performance of mechatronic mervo system. Therefore, it is urgently needed to research a large-load capacity and good-dynamic performance of harmonic drive. In this paper, the static and dynamic mechanical properties of harmonic gear were analyzed in order to find combination of factors which affected load capacity and dynamic performance of harmonic drive, so as to provide theories for improving its carrying capacity and dynamic performance.The abaqus software was applied to establish finite element model of harmonic drive.Through the finite element assembly simulation of harmonic drive, the static and dynamic mechanical properties of harmonic gear were obtained in order to verify the theory of flexspline deformation function, and identified the risk profile of flexspline.When the flexspline was applied by static load, the simulation obtained the deformation and stress distribution in the conditions of no-load and static-load in order to reveals bearing characteristic of flexspline under static loading.Finally, on the basis of the simulation the critical structural parameters of flexspline was tried to change to study comprehensive performance of flexspline in order to obtain the main factors on load capacity, fatigue life and the composite stiffness.The whole harmonic dynamic assembling was applied to study external input on its dynamic mechanical properties. The various load conditions (load size, load frequency and load waveforms) and the input form (input frequency, the input waveform and the input speed) on the deformation, stress and time-varying characteristics of flexspline and dynamic response of harmonic drive was obtained.Based on the above research, Lumped parameter model was used to build dynamic equation of harmonic gear drive. S function was applied to build compiled elastic deformation function of flexspline. Simulink simulator was applied to solve harmonic drive the numerical solution of nonlinear differential equation.The results validated the accuracy of the dynamic model, which provided theoretical basis for dynamic characteristic analysis of the harmonic drive.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. The Simulation Technology Study of Marine Gas Turbine Based on Modular Modeling,U674.703
  3. Modelling and Development of Simulation Software of Rolling Mill Bending Roller Control System,TG334.9
  4. Research of Vibration Mechanism on the 2030 Continuous Annealing Unit’s Temper Mill,TG333
  5. Design of the Hydraulic System and Research of the Control for Electro-hydraulic Servo Dynamic Testing Machine,TH87
  6. Optimal Design and Parameterized Modelling for the Crawler Mounted Crane Jib,TH213.7
  7. The Design and Exploitation of Furnace Temperature Measurement and Control System Based on LabVIEW,TP274
  8. Finite Element Simulation and Research of Fine-blanking and Die Clearance,TG386
  9. A 2D Coplanar Translation Stage with Synchronous Xy Position Metrology for Surface Scanning Measurement,TB9
  10. The Detection of Facial Fatigue by Infrared Imaging System Based on DM642,TP391.41
  11. Design and Development of a CAD/FEA Seamless Integration Platform CAFIP,TP391.72
  12. Carpet foam machine hydraulic system and pump control cylinder speed control system,TS106.76
  13. Fatigue Life Analysis on Elastic Thin-Wall Component of Harmonic Gear Drive,TH132.46
  14. Research on Parmeters Estimation of Digital Moudulation Signals,TN911.3
  15. Simulation Research and Design for the Three-Phase Voltage Sag Simulator,TM714.2
  16. The Research on Direct Torque Control System of Permanent Magnet Synchronous Motor,TM341
  17. Research of the Inverter of Disc Motor,TM921.51
  18. Hydraulic belt tensioning device for dynamic simulation study,TD528.1
  19. Design and Research of the Hydraulic Servo Manipulator of the HY400X125,TH137
  20. The Study on Optimal Design and Fuzzy Control of Active Suspension in Vehicles,U463.33
  21. Design and Research of Standard Metering Device of 60KA Heavy Direct Current,TM933.1

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > The transmission mechanism > Meshing > Gears and gearing
© 2012 www.DissertationTopic.Net  Mobile