Dissertation > Excellent graduate degree dissertation topics show

Chaotic Motion and Control of Flapping Wing Mechanism with Bearing Clearance

Author: ZhaoMingCheng
Tutor: XieJin
School: Southwest Jiaotong University
Course: Mechanical and Electronic Engineering
Keywords: flapping wing mechanism bearing clearances chaos control of chaos OGY method system of Henon
CLC: TH112
Type: Master's thesis
Year: 2010
Downloads: 33
Quote: 2
Read: Download Dissertation

Abstract


For its extensive applications in military and civilian, bionic flapping wing micro air vehicle (FMAV) has captured special attention of many researchers in recent years. One of key components of FMAV is flapping wing mechanism and its dynamic characteristics affect directly the behaviors of FMAV.Since the bearing clearance in flapping wing mechanism is inevitable, when it run at a higher speed, the elements of kinematic pair will detach temporarily and the impact happens as they contact once again, which will cause a severe vibration and the velocity, acceleration and reaction force of the kinematic pair will change rapidly. The results from other researchers have shown that such chaotic motion will make the aerodynamic force fluctuate and the lift coefficient reduce remarkably, In order to eliminate such bad influence, the chaotic motion and control of flapping wing mechanism are studied in this thesis.The thesis starts with the discussion of Henon system. A method to control chaos, named OGY method is applied to Henon system. It is shown that OGY method is practicable and efficacious. Additionally, it is found that OGY method is sensitive to the target point and response vector, and the system can be controlled to different periodic orbits by varying the target point and response vector. Such of the studying work establishes the base for the controlling of chaotic motion of flapping wing mechanism.The thesis then deal with the chaotic motion and controlling of flapping wing mechanism. Using Dubowsky’s impact pair model, the dynamic equation of the mechanism with bearing clearance and spring under the load of aerodynamic force is established. By the phase diagram and Poincare diagram of the motion, the features of chaotic motion have been revealed. It is found that the maximal Lyapunov exponent will increases with the increasing of the flapping frequency of the flapping wing. By constructing stroboscopic time return map, the parameters needed for controlling chaos by OGY method are obtained, and the motion of flapping wing mechanism is successfully controlled from chaotic motion to periodic motion. The constructing of stroboscopic time series improve the efficiency of calculation for the switch point.The dynamic modeling, optimization and simulations in this thesis are conducted utilizing MATLAB.

Related Dissertations

  1. Research on synchronization control of chaotic systems,O415.5
  2. The Research of Chaos M-ary Modulation and Demodulation Method Based on Chaotic Oscillator,TN915.05
  3. With Delay fishing items and based on the ratio of prey - predator model,O175
  4. Differences of mathematics, dissipative structures and chaos in the system \,O415.5
  5. Study on Synchronization of Time-delayed Chaotic System and Its Experimental Realized,O415.5
  6. The Comprehensive Optimization of Hydrodynamic Performance and Structural Characteristics for a High-speed Ship,U661.3
  7. Research on Limit-Factors in IC Design-Tool Application,TN402
  8. The Design of Dynamic Reactive Power Compensating Device and the Chaotic Analysis of Its Integration,TM761
  9. Two Algorithms for Image Processing Based on Chaos and Fractal,TP391.41
  10. Dual flexible structural beam collision bifurcation motion and control,TB122
  11. Numerical Study of Stochastic Supersensitiviy of Generalized Burgers Equation,O241
  12. Chaos Dynamic Analysis on Nonlinear Rock Beam of Rock Burst,TD324
  13. Experimental Studies and Clinical Research on Transcutaneous Electric Nerve Stimulation Treat Epilepsy,R742.1
  14. The Research of Video Coding Arithmetic Based on Chaos Encryption,TP391.41
  15. Order out of chaos during the educational reforms of Deng Xiaoping Thought and Its Significance,A849.1
  16. The Nonlinearity and Reliability Analysis of Rotor System with Some Faults,TH165.3
  17. The Application of the Improved Rbf-nn Based on Optimization in Motor Control,TM32
  18. Low voltage PLC channel modeling study,TM571.61
  19. About chaos and Semi-group Action in Topology Dynamical System,O19
  20. Chaotic Network File System password,TN918.2
  21. Based on Chaos Theory traffic time series prediction,TN915.09

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanics (mechanical design of the basic theory ) > Of mechanism
© 2012 www.DissertationTopic.Net  Mobile