Dissertation > Excellent graduate degree dissertation topics show
Preparation and properties of silicone modified waterborne polyurethane coating agent
Author: DongQingQing
Tutor: WuMingHua
School: Zhejiang University of Technology
Course: Textile Chemistry and Dyeing and Finishing Engineering
Keywords: Waterborne polyurethane modification self cross-linking polyethersiloxanediol coating water resistance
CLC: TS195.2
Type: Master's thesis
Year: 2011
Downloads: 304
Quote: 0
Read: Download Dissertation
Abstract
|
Waterborne polyurethane which is one of the prior choice material in fabric coating agents, has advantages of good filming, flexibility, friction, adhesive fastness to fabric and environmental. However, the water resistance of it is poor, moreover, it requires additional cross-linking agent as being used to coat fabric, the operation is cumbersome and less environmental. In view of this, the self-crosslinking agent was applied to prepare the self-crosslinking waterborne polyurethane in this paper, then on this basis, the crosslinking silicone modified polyurethane was synthesized with silicone monomer, which needed no external crosslinking agent, and reached excellent water resistance, permeability and feel of the coated fabric. The paper is divided into three parts:Part one: The emulsion of self cross-linking liphatic waterborne polyurethane was synthesized with prepolymer prepared by isophorone diisocyanate and poly propylene oxide polyether and chain extenders such as dimthylol propionic acid (DMPA), trimethycolpropane (TMP), 1,4-butanediol (BDO). The effect of reaction temperature and time on the conversion of—NCO and the influences of these factors such as initial R value(n(—NCO)/n(—OH)), dosages of hydrophilic monomer and self-crosslinking monomer on the properties of polyurethane emulsion and its film were investigated, and the self cross-linking liphatic waterborne polyurethane was applied to coat the fabric , the hydrostatic pressure, washing resistant to the coated fabric were tested. The results showed: the optimal conditions for synthesis of cross-linking waterborne polyurethane was that pre-polymerization temperature was 80℃,reaction time was 2h, hydrophilic chain extending reaction temperature was 85℃, reaction time was 2h, the dosage of hydrophilic monomer was 4%, the dosage of self-crosslinking monomer was 40%.The the hydrostatic pressure of fabric coated with self cross-linking waterborne polyurethane was 239mm and its washing resistance was 26 times. The water resistance and washing resistant of fabric coated with self cross-linking waterborne polyurethane were improved obviously compared with non-modified polyurethane, and matching the performance of plus cross-linking waterborne polyurethane.The part two: The emulsion of self cross-linking silicone-modified waterborne polyurethane(Si-WPU) was synthesized with prepolymer prepared by isophorone diisocyanate, polyether210 and polyethersiloxanediol (PESO) and chain extender such as dimthylol propionic acid (DMPA), trimethycolpropane (TMP), 1,4-butanediol (BDO). The effects of the dosage and molecular weight of PESO on the properties of modified polyurethane emulsion and its film were investigated; FT-IR was used to characterize the structure of silicone-modified polyurethane; And self cross-linking silicone-modified waterborne polyurethane was applied to coat the fabric, the hydrostatic pressure, stiffness of fabric coated with Si-WPU were tested. The results showed: the emulsion of Si-WPU had good stability and a small size of particle, the water resistance and mechanical properties of the Si-WPU film were good when the molecular weight of PESO was 4600 and the amount of PESO was 6%; The FT-IR analysis showed that the Silicon chains had been grafted to the polyurethane molecular chains; The hydrostatic pressure and stiffness of the fabric coated with Si-WPU were 322 and 2.98 respectively. The hydrostatic pressure and fell of the fabric coated with polyurethane modified by polyethersiloxanediol were increased obviously compared with non-modified polyurethane.Part three: Self-made self-crosslinking silicone-modified waterborne polyurethane was applied to coat the cotton fabrics, the effects of dosage of caoting agent,curing temperature and curing time on the properties of coated cotton fabric were investigated, and the coating process conditions were optimized, the performance of fabric coated with self-made silicone-modified waterborne polyurethane was tested, and compared with non-modified waterborne polyurethane and commercially available silicone-modified waterborne polyurethane. The results showed that the optimization conditions of coating process with self-crosslinking silicone-modified waterborne polyurethane were that caoting agent dosage was 10 g/m2, cured at 140℃for 3min.Compared with non-modified waterborne polyurethane, cotton fabric coated with the silicone-modified waterborne polyurethane has better water resistance, permeability and softness.
|
Related Dissertations
- Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
- Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
- Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
- First- principles calculations of doped anatase titanium dioxide photocatalytic properties,O643.36
- Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
- Synthesis and Performance Study of Bisphenol AP-based Polybenzoxazines,TQ320.1
- Preparation of Crop Stalk-Based Sorption Materials with High Performances and Their Applications for Pah Removal from Water,X712
- Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
- Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
- LSGM electrolyte thin films and electrochemical properties of,TM911.4
- Research on the Interface Modification of Epoxy Resin/Metallic Substrates and Epoxy Resin/Pigment,TQ630.1
- Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
- Study on Chitosan-Based Composiate Nano-Coating Dope and Its Effect of Fresh-Keeping for Coated Egg,TS253.2
- The Effects of Exposure to Bisphenol-a between Adolescence and Early Adulthood on Behaviors in Mice and Its Molecular Mechanism,R965
- Selenium Modification of Astragalus Polysaccharide and Its Antioxidant Activity in Vitro,R284.1
- Physical Modification of the Soybean Protein Concentrate by Alcohol Extraction,TS201.21
- Effect of Single and Double Mutations of Yeast H3K79L、H4K20L on the Function of ELP3 and Expression of SSA3,Q75
- Research on the Modified Methods of Fly Ash for Ammonia-nitrogen Wastewater Treatment,X703
- Polyaniline / short fiber reinforced natural rubber properties,TQ330.1
- Phosphate modification of nano- TiO 2 Photoelectrochemical Properties of the,TB383.1
- Multi-dimensional charge transport group modify iridium complex design, synthesis and optical properties,O627.8
CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > Dyeing and finishing industry > Finishing > Finishing with agent
© 2012 www.DissertationTopic.Net Mobile
|