Dissertation > Excellent graduate degree dissertation topics show

Study on Decentralized Fault Diagnosis Based on Multiblock Kernel Methods

Author: ZhouHong
Tutor: ZhangYingWei
School: Northeastern University
Course: Control Theory and Control Engineering
Keywords: Multiblock Fault Diagnosis Kernel Principal Component Analysis Principal Component Analysis
CLC: TH165.3
Type: Master's thesis
Year: 2009
Downloads: 59
Quote: 0
Read: Download Dissertation

Abstract


Since industrial processes become more and more complex, the requirements of the stability, efficiency and safety of production are increasing. In order to get more accurate and timely diagnosis of complex industrial process fault, it is necessary to study more comprehensive theory and method of fault diagnosis.The paper first briefly introduced the development of fault diagnosis. Then, this paper discussed the detail of data-based fault diagnosis method. Highlighted principal component analysis (PCA), and analyzed the deficiency in dealing with the nonlinear data. In order to get better fault diagnosis performance in the monitoring of large scale nonlinear process, this paper combines the kernel method and multi-block method, proposed multi-block Kernel PCA (MBKPCA) based and multi-block kernel partial least squares (MBKPLS) based of the fault diagnosis method.When the industrial processes data have nonlinear characteristic, multiblock kernel methods can afford better fault diagnosis ability. In particular, definitions of nonlinear block contributions to SPE and T2 statistics are proposed in order to diagnose nonlinear faults. The proposed MBKPCA based method is applied to fault detection and diagnosis in the Tennessee Eastman process, and MBKPLS based method is applied to the process monitoring in a continuous annealing process. The results indicate that the proposed methods are effective.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Application of Improved Principal Component Analysis Algorithm in Course Construction,G642.4
  3. Zhaoguan Lower Coal Group water inrush prediction and control techniques,TD745
  4. The overall design and system development RTAD-CMDMDES of,U279.3
  5. Development of Fault Diagnosis System for Turbine Shaft Based on Neural Network,TK267
  6. Rail vehicle bearing fault diagnosis and research,U279.3
  7. Uncertain Information Fusion Method Based on Random Sets and Application on Fault Diagnosis of Wind Turbine Generators,TM315
  8. The Fault Diagnosis of Wind Turbine Gearbox Based on LSSVM of Parameter Optimization and Improved PSO,TM315
  9. The Research and Application of the State Evaluation Method of Power Generation Equipment,TM621.3
  10. Research on Condition Monitoring and Fault Diagnosis of Wind Turbine Driving Chain Based on Vibration Method,TM315
  11. Research of Rotor Winding Fault Detection Based on DSP,TM303.3
  12. Fault Diagnosis on Tennessee-Eastman Process,TQ021.8
  13. Improvements on CMAC Neural Network with Application in Reservoir Engineering,TP183
  14. The Measurement of Economic Openness and Countermeasure Analysis about Chongqing,F127
  15. The Land Use Change and the Driving Forces of YILI River Valley,F301
  16. Study on Gas Path Fault Diagnosis Technology of Aeroengine,V263.6
  17. Study on Fault Diagnosis and Fault Disposal of Dual Clutch Transmission,TH165.3
  18. PC Supply Chain and Quality Improvement Based on the Practice and Experience of M Company,F274;F273.2
  19. The Technology of CT/MRI Image Fusion Based on Wavelet Transform,TP391.41
  20. Study on the Failure Diagnosis System for Ship Log Sensor Off Shore Abstract,U672

CLC: > Industrial Technology > Machinery and Instrument Industry > Machinery Manufacturing Technology > Flexible manufacturing systems and flexible manufacturing cell > Fault diagnosis and maintenance
© 2012 www.DissertationTopic.Net  Mobile